kernel/drivers/gpu/drm, branch linux-5.1.y

drm/edid: parse CEA blocks embedded in DisplayID

2019-07-26T07:13:03Z

commit e28ad544f462231d3fd081a7316339359efbb481 upstream. DisplayID blocks allow embedding of CEA blocks. The payloads are identical to traditional top level CEA extension blocks, but the header is slightly different. This change allows the CEA parser to find a CEA block inside a DisplayID block. Additionally, it adds support for parsing the embedded CTA header. No further changes are necessary due to payload parity. This change fixes audio support for the Valve Index HMD. Signed-off-by: Andres Rodriguez Reviewed-by: Dave Airlie Cc: Jani Nikula Cc: # v4.15 Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.com Signed-off-by: Greg Kroah-Hartman

drm/nouveau/i2c: Enable i2c pads & busses during preinit

2019-07-26T07:13:02Z

commit 7cb95eeea6706c790571042a06782e378b2561ea upstream. It turns out that while disabling i2c bus access from software when the GPU is suspended was a step in the right direction with: commit 342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") We also ended up accidentally breaking the vbios init scripts on some older Tesla GPUs, as apparently said scripts can actually use the i2c bus. Since these scripts are executed before initializing any subdevices, we end up failing to acquire access to the i2c bus which has left a number of cards with their fan controllers uninitialized. Luckily this doesn't break hardware - it just means the fan gets stuck at 100%. This also means that we've always been using our i2c busses before initializing them during the init scripts for older GPUs, we just didn't notice it until we started preventing them from being used until init. It's pretty impressive this never caused us any issues before! So, fix this by initializing our i2c pad and busses during subdev pre-init. We skip initializing aux busses during pre-init, as those are guaranteed to only ever be used by nouveau for DP aux transactions. Signed-off-by: Lyude Paul Tested-by: Marc Meledandri Fixes: 342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs Signed-off-by: Greg Kroah-Hartman

drm: return -EFAULT if copy_to_user() fails

2019-07-14T06:09:45Z

[ Upstream commit 74b67efa8d7b4f90137f0ab9a80dd319da050350 ] The copy_from_user() function returns the number of bytes remaining to be copied but we want to return a negative error code. Otherwise the callers treat it as a successful copy. Signed-off-by: Dan Carpenter Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20190618131843.GA29463@mwanda Signed-off-by: Sasha Levin

drm/vmwgfx: fix a warning due to missing dma_parms

2019-07-14T06:09:40Z

[ Upstream commit 39916897cd815a0ee07ba1f6820cf88a63e459fc ] Booting up with DMA_API_DEBUG_SG=y generates a warning due to the driver forgot to set dma_parms appropriately. Set it just after vmw_dma_masks() in vmw_driver_load(). DMA-API: vmwgfx 0000:00:0f.0: mapping sg segment longer than device claims to support [len=2097152] [max=65536] WARNING: CPU: 2 PID: 261 at kernel/dma/debug.c:1232 debug_dma_map_sg+0x360/0x480 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018 RIP: 0010:debug_dma_map_sg+0x360/0x480 Call Trace: vmw_ttm_map_dma+0x3b1/0x5b0 [vmwgfx] vmw_bo_map_dma+0x25/0x30 [vmwgfx] vmw_otables_setup+0x2a8/0x750 [vmwgfx] vmw_request_device_late+0x78/0xc0 [vmwgfx] vmw_request_device+0xee/0x4e0 [vmwgfx] vmw_driver_load.cold+0x757/0xd84 [vmwgfx] drm_dev_register+0x1ff/0x340 [drm] drm_get_pci_dev+0x110/0x290 [drm] vmw_probe+0x15/0x20 [vmwgfx] local_pci_probe+0x7a/0xc0 pci_device_probe+0x1b9/0x290 really_probe+0x1b5/0x630 driver_probe_device+0xa3/0x1a0 device_driver_attach+0x94/0xa0 __driver_attach+0xdd/0x1c0 bus_for_each_dev+0xfe/0x150 driver_attach+0x2d/0x40 bus_add_driver+0x290/0x350 driver_register+0xdc/0x1d0 __pci_register_driver+0xda/0xf0 vmwgfx_init+0x34/0x1000 [vmwgfx] do_one_initcall+0xe5/0x40a do_init_module+0x10f/0x3a0 load_module+0x16a5/0x1a40 __se_sys_finit_module+0x183/0x1c0 __x64_sys_finit_module+0x43/0x50 do_syscall_64+0xc8/0x606 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Co-developed-by: Thomas Hellstrom Signed-off-by: Qian Cai Signed-off-by: Thomas Hellstrom Signed-off-by: Sasha Levin

drm/vmwgfx: Honor the sg list segment size limitation

2019-07-14T06:09:40Z

[ Upstream commit bde15555ba61c7f664f40fd3c6fdbdb63f784c9b ] When building sg tables, honor the device sg list segment size limitation. Signed-off-by: Thomas Hellstrom Reviewed-by: Deepak Rawat Signed-off-by: Sasha Levin

drm/imx: only send event on crtc disable if kept disabled

2019-07-10T07:52:31Z

commit 5aeab2bfc9ffa72d3ca73416635cb3785dfc076f upstream. The event will be sent as part of the vblank enable during the modeset if the crtc is not being kept disabled. Fixes: 5f2f911578fb ("drm/imx: atomic phase 3 step 1: Use atomic configuration") Signed-off-by: Robert Beckett Reviewed-by: Daniel Vetter Signed-off-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman

drm/imx: notify drm core before sending event during crtc disable

2019-07-10T07:52:30Z

commit 78c68e8f5cd24bd32ba4ca1cdfb0c30cf0642685 upstream. Notify drm core before sending pending events during crtc disable. This fixes the first event after disable having an old stale timestamp by having drm_crtc_vblank_off update the timestamp to now. This was seen while debugging weston log message: Warning: computed repaint delay is insane: -8212 msec This occurred due to: 1. driver starts up 2. fbcon comes along and restores fbdev, enabling vblank 3. vblank_disable_fn fires via timer disabling vblank, keeping vblank seq number and time set at current value (some time later) 4. weston starts and does a modeset 5. atomic commit disables crtc while it does the modeset 6. ipu_crtc_atomic_disable sends vblank with old seq number and time Fixes: a474478642d5 ("drm/imx: fix crtc vblank state regression") Signed-off-by: Robert Beckett Reviewed-by: Daniel Vetter Signed-off-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman

drm/etnaviv: add missing failure path to destroy suballoc

2019-07-10T07:52:30Z

commit be132e1375c1fffe48801296279079f8a59a9ed3 upstream. When something goes wrong in the GPU init after the cmdbuf suballocator has been constructed, we fail to destroy it properly. This causes havok later when the GPU is unbound due to a module unload or similar. Fixes: e66774dd6f6a (drm/etnaviv: add cmdbuf suballocator) Signed-off-by: Lucas Stach Tested-by: Russell King Signed-off-by: Greg Kroah-Hartman

drm/virtio: move drm_connector_update_edid_property() call

2019-07-10T07:52:30Z

commit 41de4be6f6efa4132b29af51158cd672d93f2543 upstream. drm_connector_update_edid_property can sleep, we must not call it while holding a spinlock. Move the callsite. Fixes: b4b01b4995fb ("drm/virtio: add edid support") Reported-by: Max Filippov Signed-off-by: Gerd Hoffmann Tested-by: Max Filippov Tested-by: Cornelia Huck Acked-by: Cornelia Huck Link: http://patchwork.freedesktop.org/patch/msgid/20190405044602.2334-1-kraxel@redhat.com Signed-off-by: Greg Kroah-Hartman

drm/amdgpu/gfx9: use reset default for PA_SC_FIFO_SIZE

2019-07-10T07:52:30Z

commit 25f09f858835b0e9a06213811031190a17d8ab78 upstream. Recommended by the hw team. Reviewed-and-Tested-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman