kernel/drivers/gpu/drm/tilcdc/tilcdc_external.c, branch linux-5.1.y

drm: Split out drm_probe_helper.h

2019-01-24T12:20:42Z

Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland Acked-by: Sam Ravnborg Cc: Sam Ravnborg Cc: Jani Nikula Cc: Laurent Pinchart Acked-by: Rodrigo Vivi Acked-by: Benjamin Gaignard Acked-by: Jani Nikula Acked-by: Neil Armstrong Acked-by: Oleksandr Andrushchenko Acked-by: CK Hu Acked-by: Alex Deucher Acked-by: Sam Ravnborg Reviewed-by: Laurent Pinchart Acked-by: Liviu Dudau Signed-off-by: Daniel Vetter Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch

drm/tilcdc: Use drm_connector_has_possible_encoder()

2018-07-05T13:52:08Z

Use drm_connector_has_possible_encoder() for checking whether the encoder has an associated connector. v2: Replace the drm_for_each_connector_encoder_ids() loop with a simple drm_connector_has_possible_encoder() call Cc: Jyri Sarha Cc: Tomi Valkeinen Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180628131315.14156-10-ville.syrjala@linux.intel.com Reviewed-by: Alex Deucher Acked-by: Jyri Sarha

drm/tilcdc: Add support for drm panels

2018-02-28T09:48:16Z

Add support for drm panels to tilcdc. Adding the support on top of the existing bridge support needs only couple of lines of code when using using the drm panel bridge helpers. Signed-off-by: Jyri Sarha Reviewed-by: Tomi Valkeinen

drm: convert drivers to use of_graph_get_remote_node

2017-04-06T21:00:27Z

Convert drivers to use the new of_graph_get_remote_node() helper instead of parsing the endpoint node and then getting the remote device node. Now drivers can just specify the device node and which port/endpoint and get back the connected remote device node. The details of the graph binding are nicely abstracted into the core OF graph code. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by: Rob Herring Acked-by: Neil Armstrong Tested-by: Liviu Dudau Tested-by: Eric Anholt Tested-by: Jyri Sarha Tested by: Archit Taneja Signed-off-by: Sean Paul

drm: bridge: Link encoder and bridge in core code

2016-12-18T11:01:45Z

Instead of linking encoders and bridges in every driver (and getting it wrong half of the time, as many drivers forget to set the drm_bridge encoder pointer), do so in core code. The drm_bridge_attach() function needs the encoder and optional previous bridge to perform that task, update all the callers. Signed-off-by: Laurent Pinchart Acked-by: Stefan Agner # For DCU Acked-by: Boris Brezillon # For atmel-hlcdc Acked-by: Vincent Abriou # For STI Acked-by: Maxime Ripard # For sun4i Acked-by: Xinliang Liu # For hisilicon Acked-by: Jyri Sarha # For tilcdc Reviewed-by: Daniel Vetter Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com

drm/tilcdc: Add drm bridge support for attaching drm bridge drivers

2016-11-30T12:17:52Z

Adds drm bride support for attaching drm bridge drivers to tilcdc. The decision whether a video port leads to an external encoder or bridge is made simply based on remote device's compatible string. The code has been tested with BeagleBone-Black with and without BeagleBone DVI-D Cape Rev A3 using ti-tfp410 driver. Signed-off-by: Jyri Sarha Tested-by: Bartosz Golaszewski

drm: convert DT component matching to component_match_add_release()

2016-10-25T15:52:38Z

Convert DT component matching to use component_match_add_release(). Acked-by: Jyri Sarha Reviewed-by: Jyri Sarha Signed-off-by: Russell King Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/E1bwo6l-0005Io-Q1@rmk-PC.armlinux.org.uk

drm/tilcdc: Choose console BPP that supports RGB

2016-09-01T19:32:23Z

Choose console BPP that supports RGB and remove the old fbdev bpp selection code. LCDC on AM335x has red and blue wires switched between 24 bit and 16 bit colors. If 24 format is wired for RGB colors, the 16 bit format is wired for BGR. drm_fbdev_cma_init() does not currently like anything else but RGB formats, so we must choose such bytes per pixel value that supports RGB. Signed-off-by: Jyri Sarha Reviewed-by: Tomi Valkeinen

drm/tilcdc: Fix check for remote port parent

2016-09-01T19:28:57Z

In function tilcdc_get_external_components the check for the remote port parent is not correct. We need a '||' instead of an '&&'. Signed-off-by: Teresa Remmet Signed-off-by: Jyri Sarha

drm/tilcdc: Avoid error print by of_graph_get_next_endpoint()

2016-08-08T20:04:56Z

Avoid error print by of_graph_get_next_endpoint() if there is no ports present. Signed-off-by: Jyri Sarha