kernel/drivers/gpu/drm/tegra/hdmi.c, branch linux-4.17.y

drm/tegra: hdmi: Register debugfs in ->late_register()

2017-12-13T12:42:07Z

The ->late_register() and ->early_unregister() callbacks are called at the right time to make sure userspace only accesses interfaces when it should. Move debugfs registration and unregistration to these callback functions to avoid potential races with userspace. Signed-off-by: Thierry Reding

drm/tegra: hdmi: Move register definitions into a table

2017-12-13T12:42:05Z

After commit 07a8aab89927 ("drm/tegra: hdmi: Trace register accesses"), the debugfs register dump implementation causes excessive stack usage and can result in build warnings. To fix this, move the register definitions into a table and iterate over the table while dumping the registers to debugfs. Signed-off-by: Thierry Reding

drm/tegra: hdmi: Add cec-notifier support

2017-10-20T12:19:54Z

In order to support CEC the HDMI driver has to inform the CEC driver whenever the physical address changes. So when the EDID is read the CEC driver has to be informed and whenever the hotplug detect goes away. This is done through the cec-notifier framework. The link between the HDMI driver and the CEC driver is done through the hdmi-phandle property in the tegra-cec node in the device tree. Signed-off-by: Hans Verkuil Signed-off-by: Thierry Reding

drm/tegra: hdmi: Use of_device_get_match_data()

2017-10-20T12:19:53Z

Avoid some boilerplate by calling of_device_get_match_data() instead of open-coding the equivalent in the driver. Signed-off-by: Thierry Reding

Merge tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

2017-08-21T07:37:33Z

drm/tegra: Changes for v4.14-rc1 This contains a couple of fixes and improvements for host1x, with some preparatory work for Tegra186 support. The remainder is cleanup and minor bugfixes for Tegra DRM along with enhancements to debuggability. There have also been some enhancements to the kernel interfaces for host1x job submissions and support for mmap'ing PRIME buffers directly, all of which get the interfaces very close to ready for serious work. * tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits) drm/tegra: Prevent BOs from being freed during job submission drm/tegra: gem: Implement mmap() for PRIME buffers drm/tegra: Support render node drm/tegra: sor: Trace register accesses drm/tegra: dpaux: Trace register accesses drm/tegra: dsi: Trace register accesses drm/tegra: hdmi: Trace register accesses drm/tegra: dc: Trace register accesses drm/tegra: sor: Use unsigned int for register offsets drm/tegra: hdmi: Use unsigned int for register offsets drm/tegra: dsi: Use unsigned int for register offsets drm/tegra: dpaux: Use unsigned int for register offsets drm/tegra: dc: Use unsigned int for register offsets drm/tegra: Fix NULL deref in debugfs/iova drm/tegra: switch to drm_*_get(), drm_*_put() helpers drm/tegra: Set MODULE_FIRMWARE for the VIC drm/tegra: Add CONFIG_OF dependency gpu: host1x: Support sub-devices recursively gpu: host1x: fix error return code in host1x_probe() gpu: host1x: Fix bitshift/mask multipliers ...

drm/tegra: hdmi: Trace register accesses

2017-08-17T15:57:15Z

Add tracepoint events for HDMI controller register accesses. Signed-off-by: Thierry Reding

drm/tegra: hdmi: Use unsigned int for register offsets

2017-08-17T15:57:13Z

Register offsets are usually fairly small numbers, so an unsigned int is more than enough to represent them. Signed-off-by: Thierry Reding

drm: Nuke drm_atomic_helper_connector_dpms

2017-08-08T12:48:48Z

It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter Cc: Archit Taneja Cc: Andrzej Hajda Cc: Laurent Pinchart Cc: Peter Senna Tschudin Cc: Martin Donnelly Cc: Martyn Welch Cc: Daniel Vetter Cc: Jani Nikula Cc: Sean Paul Cc: David Airlie Cc: Inki Dae Cc: Joonyoung Shim Cc: Seung-Woo Kim Cc: Kyungmin Park Cc: Kukjin Kim Cc: Krzysztof Kozlowski Cc: Stefan Agner Cc: Alison Wang Cc: Russell King Cc: Philipp Zabel Cc: CK Hu Cc: Matthias Brugger Cc: Neil Armstrong Cc: Carlo Caione Cc: Kevin Hilman Cc: Marek Vasut Cc: Ben Skeggs Cc: Tomi Valkeinen Cc: Eric Anholt Cc: Mark Yao Cc: Heiko Stuebner Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: Yannick Fertre Cc: Philippe Cornu Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Thierry Reding Cc: Jonathan Hunter Cc: Jyri Sarha Cc: Gerd Hoffmann Cc: Shawn Guo Cc: John Stultz Cc: Lars-Peter Clausen Cc: Sergei Shtylyov Cc: Jeffy Chen Cc: Tomeu Vizoso Cc: Yakir Yang Cc: Marek Szyprowski Cc: Jose Abreu Cc: Romain Perier Cc: Kieran Bingham Cc: Xinliang Liu Cc: Alexey Brodkin Cc: Alex Deucher Cc: Rongrong Zou Cc: Rob Clark Cc: Hai Li Cc: "Noralf Trønnes" Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang Cc: Baoyou Xie Cc: Boris Brezillon Reviewed-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong Reviewed-by: Neil Armstrong Acked-by: Philipp Zabel Acked-by: Archit Taneja Tested-by: Philippe Cornu (on stm) Reviewed-by: Laurent Pinchart Acked-by: Shawn Guo Acked-by: Shawn Guo Acked-by: Noralf Trønnes Acked-by: Vincent Abriou

drm: handle HDMI 2.0 VICs in AVI info-frames

2017-07-14T18:23:54Z

HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64). For any other mode, the VIC filed in AVI infoframes should be 0. HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is extended to (VIC 1-107). This patch adds a bool input variable, which indicates if the connected sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a HDMI 2.0 VIC to a HDMI 1.4 sink. This patch touches all drm drivers, who are callers of this function drm_hdmi_avi_infoframe_from_display_mode but to make sure there is no change in current behavior, is_hdmi2 is kept as false. In case of I915 driver, this patch: - checks if the connected display is HDMI 2.0. - HDMI infoframes carry one of this two type of information: - VIC for 4K modes for HDMI 1.4 sinks - S3D information for S3D modes As CEA-861-F has already defined VICs for 4K videomodes, this patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks, until the mode is 3D. Cc: Ville Syrjala Cc: Jose Abreu Cc: Andrzej Hajda Cc: Alex Deucher Cc: Daniel Vetter PS: This patch touches a few lines in few files, which were already above 80 char, so checkpatch gives 80 char warning again. - gpu/drm/omapdrm/omap_encoder.c - gpu/drm/i915/intel_sdvo.c V2: Rebase, Added r-b from Andrzej V3: Addressed review comment from Ville: - Do not send VICs in both AVI-IF and HDMI-IF send only one of it. V4: Rebase V5: Added r-b from Neil. Addressed review comments from Ville - Do not block HDMI vendor IF, instead check for VIC while handling AVI infoframes V6: Rebase V7: Rebase Reviewed-by: Andrzej Hajda Reviewed-by: Neil Armstrong Signed-off-by: Shashank Sharma Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä

Merge tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

2016-07-16T01:23:50Z

drm/tegra: Changes for v4.8-rc1 This set of changes contains a bunch of cleanups to the host1x driver as well as the addition of a pin controller for DPAUX, which is required by boards to configure the DPAUX pads in AUX mode (for DisplayPort) or I2C mode (for HDMI and DDC). Included is also a bit of rework of the SOR driver in preparation to add DisplayPort support as well as some refactoring and cleanup. Finally, all output drivers are converted to runtime PM, which greatly simplifies the handling of clocks and resets. * tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux: (35 commits) drm/tegra: sor: Reject HDMI 2.0 modes drm/tegra: sor: Prepare for generic PM domain support drm/tegra: dsi: Prepare for generic PM domain support drm/tegra: sor: Make XBAR configurable per SoC drm/tegra: sor: Use sor1_src clock to set parent for HDMI dt-bindings: display: tegra: Add source clock for SOR drm/tegra: sor: Implement sor1_brick clock drm/tegra: sor: Implement runtime PM drm/tegra: hdmi: Implement runtime PM drm/tegra: dsi: Implement runtime PM drm/tegra: dc: Implement runtime PM drm/tegra: hdmi: Enable audio over HDMI drm/tegra: sor: Do not support deep color modes drm/tegra: sor: Extract tegra_sor_mode_set() drm/tegra: sor: Split out tegra_sor_apply_config() drm/tegra: sor: Rename tegra_sor_calc_config() drm/tegra: sor: Factor out tegra_sor_set_parent_clock() drm/tegra: dpaux: Add pinctrl support dt-bindings: Add bindings for Tegra DPAUX pinctrl driver drm/tegra: Prepare DPAUX for supporting generic PM domains ...