kernel/drivers/gpu/drm/tegra/drm.c, branch linux-6.9.y

Merge drm/drm-fixes into drm-misc-fixes

2024-02-26T14:23:00Z

Sima needs a more recent release to apply a patch. Signed-off-by: Maxime Ripard

drm/tegra: Remove existing framebuffer only if we support display

2024-02-26T12:23:46Z

Tegra DRM doesn't support display on Tegra234 and later, so make sure not to remove any existing framebuffers in that case. v2: - add comments explaining how this situation can come about - clear DRIVER_MODESET and DRIVER_ATOMIC feature bits Fixes: 6848c291a54f ("drm/aperture: Convert drivers to aperture interfaces") Signed-off-by: Thierry Reding Reviewed-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20240223150333.1401582-1-thierry.reding@gmail.com

drm/tegra: Do not assume that a NULL domain means no DMA IOMMU

2024-02-01T12:17:21Z

Previously with tegra-smmu, even with CONFIG_IOMMU_DMA, the default domain could have been left as NULL. The NULL domain is specially recognized by host1x_client_iommu_attach() as meaning it is not the DMA domain and should be replaced with the special shared domain. This happened prior to the below commit because tegra-smmu was using the NULL domain to mean IDENTITY. Now that the domain is properly labled the test in DRM doesn't see NULL. Check for IDENTITY as well to enable the special domains. Fixes: c8cc2655cc6c ("iommu/tegra-smmu: Implement an IDENTITY domain") Reported-by: diogo.ivo@tecnico.ulisboa.pt Closes: https://lore.kernel.org/all/bbmhcoghrprmbdibnjum6lefix2eoquxrde7wyqeulm4xabmlm@b6jy32saugqh/ Tested-by: diogo.ivo@tecnico.ulisboa.pt Signed-off-by: Jason Gunthorpe Link: https://lore.kernel.org/r/0-v1-3049f92c4812+16691-host1x_def_dom_fix_jgg@nvidia.com Signed-off-by: Joerg Roedel

drm: Clear fd/handle callbacks in struct drm_driver

2023-06-26T09:08:41Z

Clear all assignments of struct drm_driver's fd/handle callbacks to drm_gem_prime_fd_to_handle() and drm_gem_prime_handle_to_fd(). These functions are called by default. Add a TODO item to convert vmwgfx to the defaults as well. v2: * remove TODO item (Zack) * also update amdgpu's amdgpu_partition_driver Signed-off-by: Thomas Zimmermann Reviewed-by: Simon Ser Acked-by: Alex Deucher Acked-by: Jeffrey Hugo # qaic Link: https://patchwork.freedesktop.org/patch/msgid/20230620080252.16368-3-tzimmermann@suse.de

Merge drm/drm-next into drm-misc-next

2023-04-16T18:11:53Z

Backmerging drm-next to sync with msm tree. Resolves a conflict between aperture-helper changes and msm's use of those interfaces. Signed-off-by: Thomas Zimmermann

drm/aperture: Remove primary argument

2023-04-16T12:17:41Z

Only really pci devices have a business setting this - it's for figuring out whether the legacy vga stuff should be nuked too. And with the preceding two patches those are all using the pci version of this. Which means for all other callers primary == false and we can remove it now. v2: - Reorder to avoid compile fail (Thomas) - Include gma500, which retained it's called to the non-pci version. v4: - fix Daniel's S-o-b address v5: - add back an S-o-b tag with Daniel's Intel address Signed-off-by: Daniel Vetter Signed-off-by: Daniel Vetter Signed-off-by: Thomas Zimmermann Cc: Thomas Zimmermann Cc: Javier Martinez Canillas Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Deepak Rawat Cc: Neil Armstrong Cc: Kevin Hilman Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: Thierry Reding Cc: Jonathan Hunter Cc: Emma Anholt Cc: Helge Deller Cc: David Airlie Cc: Daniel Vetter Cc: linux-hyperv@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Acked-by: Martin Blumenstingl Acked-by: Thierry Reding Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-4-tzimmermann@suse.de

drm/tegra: Implement fbdev emulation as in-kernel client

2023-04-06T10:18:56Z

Move code from ad-hoc fbdev callbacks into DRM client functions and remove the old callbacks. The functions instruct the client to poll for changed output or restore the display. The DRM core calls both, the old callbacks and the new client helpers, from the same places. The new functions perform the same operation as before, so there's no change in functionality. Replace all code that initializes or releases fbdev emulation throughout the driver. Instead initialize the fbdev client by a single call to tegra_fbdev_setup() after tegra has registered its DRM device. As in most drivers, tegra's fbdev emulation now acts like a regular DRM client. The fbdev client setup consists of the initial preparation and the hot-plugging of the display. The latter creates the fbdev device and sets up the fbdev framebuffer. The setup performs display hot-plugging once. If no display can be detected, DRM probe helpers re-run the detection on each hotplug event. A call to drm_dev_unregister() releases the client automatically. No further action is required within tegra. If the fbdev framebuffer has been fully set up, struct fb_ops.fb_destroy implements the release. For partially initialized emulation, the fbdev client reverts the initial setup. Signed-off-by: Thomas Zimmermann Signed-off-by: Thierry Reding

iommu: Add a gfp parameter to iommu_map()

2023-01-25T10:52:00Z

The internal mechanisms support this, but instead of exposting the gfp to the caller it wrappers it into iommu_map() and iommu_map_atomic() Fix this instead of adding more variants for GFP_KERNEL_ACCOUNT. Reviewed-by: Kevin Tian Signed-off-by: Jason Gunthorpe Reviewed-by: Mathieu Poirier Link: https://lore.kernel.org/r/1-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel

drm/tegra: Add Tegra234 support to NVDEC driver

2022-11-25T15:14:58Z

Add support for the Tegra234 version of NVDEC to the NVDEC driver. This version sports a RISC-V controller and requires a few additional clocks. After firmware has been loaded, the behavior is, however, backwards compatible. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding

gpu: host1x: Avoid trying to use GART on Tegra20

2022-11-18T08:33:20Z

Since commit c7e3ca515e78 ("iommu/tegra: gart: Do not register with bus") quite some time ago, the GART driver has effectively disabled itself to avoid issues with the GPU driver expecting it to work in ways that it doesn't. As of commit 57365a04c921 ("iommu: Move bus setup to IOMMU device registration") that bodge no longer works, but really the GPU driver should be responsible for its own behaviour anyway. Make the workaround explicit. Reported-by: Jon Hunter Suggested-by: Dmitry Osipenko Signed-off-by: Robin Murphy Tested-by: Jon Hunter Signed-off-by: Thierry Reding