kernel/drivers/gpu/drm/sun4i/sun4i_tv.c, branch linux-4.17.y

drm/sun4i: tcon: Don't rely on encoders to set the TCON mode

2017-10-17T17:49:13Z

Just like we did for the TCON enable and disable, for historical reasons we used to rely on the encoders calling the TCON mode_set function, while the CRTC has a callback for that. Let's implement it in order to reduce the boilerplate code. Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/faa3a4d511039af1d116270dfef3a8b60ca3591e.1508231063.git-series.maxime.ripard@free-electrons.com

drm/sun4i: tcon: Don't rely on encoders to enable the TCON

2017-10-17T17:49:13Z

So far, we've required all the TCON-connected encoders to call the TCON enable and disable functions. This was made this way because in the RGB/LVDS case, the TCON is the CRTC and the encoder. However, in all the other cases (HDMI, TV, DSI, etc.), we have another encoder down the road that needs to be programmed. We also needed to know which channel the encoder is connected to, which is encoder-specific. The CRTC's enable and disable callbacks can work just fine for our use case, and we can get the channel to use just by looking at the type of encoder, since that is fixed. Implement those callbacks, which will remove some of the encoder boilerplate. Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/90b4396e19b3eca61b2ebfdae0672074b88ad74d.1508231063.git-series.maxime.ripard@free-electrons.com

Merge tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next

2017-08-20T23:05:01Z

Allwinner DRM changes for 4.14 A few changes, but most notably improving the HDMI support merged in 4.13, by reporting the DDC adapter as an i2c bus, and by adding CEC support through the CEC framework. * tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: sun4i_hdmi: add CEC support dt-bindings: display: sunxi: Improve endpoint ID scheme readability drm/sun4i: tcon: remove unused function drm/sun4i: Remove useless atomic_check drm/sun4i: Add if statement instead of depends on drm/sun4i: hdmi: Implement I2C adapter for A10s DDC bus drm/sun4i: constify drm_plane_helper_funcs

drm/sun4i: make drm_connector_funcs structures const

2017-08-09T16:37:17Z

Make these const as they are only passed to the function drm_connector_init and the corresponding argument is of type const. Done using Coccinelle @match disable optional_qualifier@ identifier s; @@ static struct drm_connector_funcs s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression e1,e2; position ref.p; @@ drm_connector_init(e1,e2,&s@p,...) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct drm_connector_funcs s; Signed-off-by: Bhumika Goyal Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1502191712-11231-3-git-send-email-bhumirks@gmail.com

drm: Nuke drm_atomic_helper_connector_dpms

2017-08-08T12:48:48Z

It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter Cc: Archit Taneja Cc: Andrzej Hajda Cc: Laurent Pinchart Cc: Peter Senna Tschudin Cc: Martin Donnelly Cc: Martyn Welch Cc: Daniel Vetter Cc: Jani Nikula Cc: Sean Paul Cc: David Airlie Cc: Inki Dae Cc: Joonyoung Shim Cc: Seung-Woo Kim Cc: Kyungmin Park Cc: Kukjin Kim Cc: Krzysztof Kozlowski Cc: Stefan Agner Cc: Alison Wang Cc: Russell King Cc: Philipp Zabel Cc: CK Hu Cc: Matthias Brugger Cc: Neil Armstrong Cc: Carlo Caione Cc: Kevin Hilman Cc: Marek Vasut Cc: Ben Skeggs Cc: Tomi Valkeinen Cc: Eric Anholt Cc: Mark Yao Cc: Heiko Stuebner Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: Yannick Fertre Cc: Philippe Cornu Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Thierry Reding Cc: Jonathan Hunter Cc: Jyri Sarha Cc: Gerd Hoffmann Cc: Shawn Guo Cc: John Stultz Cc: Lars-Peter Clausen Cc: Sergei Shtylyov Cc: Jeffy Chen Cc: Tomeu Vizoso Cc: Yakir Yang Cc: Marek Szyprowski Cc: Jose Abreu Cc: Romain Perier Cc: Kieran Bingham Cc: Xinliang Liu Cc: Alexey Brodkin Cc: Alex Deucher Cc: Rongrong Zou Cc: Rob Clark Cc: Hai Li Cc: "Noralf Trønnes" Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang Cc: Baoyou Xie Cc: Boris Brezillon Reviewed-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong Reviewed-by: Neil Armstrong Acked-by: Philipp Zabel Acked-by: Archit Taneja Tested-by: Philippe Cornu (on stm) Reviewed-by: Laurent Pinchart Acked-by: Shawn Guo Acked-by: Shawn Guo Acked-by: Noralf Trønnes Acked-by: Vincent Abriou

drm/sun4i: Remove useless atomic_check

2017-07-18T14:52:42Z

The atomic_check callback is optional, and we don't implement anything in some parts of our drivers. Let's remove it. Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard

drm/sun4i: tcon: Move the muxing out of the mode set function

2017-06-01T07:49:57Z

The muxing can actually happen on both channels on some SoCs, so it makes more sense to just move it out of the sun4i_tcon1_mode_set function and create a separate function that needs to be called by the encoders. Let's do that and convert the existing drivers. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard

drm/sun4i: abstract a engine type

2017-06-01T07:47:23Z

As we are going to add support for the Allwinner DE2 engine in sun4i-drm driver, we will finally have two types of display engines -- the DE1 backend and the DE2 mixer. They both do some display blending and feed graphics data to TCON, and is part of the "Display Engine" called by Allwinner, so I choose to call them both "engine" here. Abstract the engine type to a new struct with an ops struct, which contains functions that should be called outside the engine-specified code (in TCON, CRTC or TV Encoder code). In order to preserve bisectability, we also switch the backend and layer code in its own module. Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard

drm/sun4i: Set TCON clock inside sun4i_tconX_mode_set

2017-05-14T06:31:58Z

Currently we are configuring the TCON's dot clock or special clock directly from the encoder mode_set functions. Since we already provide mode_set helper functions for the TCON's 2 channels, we can set the respective clock from those helpers, and reduce the exposure of the TCON's internals. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard

drm/sun4i: tv: Get tcon and backend pointers from associated crtc

2017-03-09T10:19:59Z

The drm_encoder structure provides us with a pointer to the crtc currently tied to the encoder. Subsequently we can extract the tcon and backend pointers from our crtc structure, instead of getting it directly from the sun4i_drv structure. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard