kernel/drivers/gpu/drm/panel/panel-simple.c, branch linux-5.1.y

drm/panel: simple: Add support for PDA 91-00156-A0 panel

2019-01-28T16:45:28Z

PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5). Signed-off-by: Eugen Hristev Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-4-git-send-email-eugen.hristev@microchip.com

drm/panel: simple: Add support for the LeMaker BL035-RGB-002 3.5" LCD

2019-01-28T16:45:27Z

This adds support for the 3.5" LCD panel from LeMaker, sold for use with BananaPi boards. It comes with a 24-bit RGB888 parallel interface and requires an active-low DE signal Signed-off-by: Paul Kocialkowski Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-7-contact@paulk.fr

drm/panel: simple: Add AUO G101EVN010 panel support

2018-12-03T16:04:48Z

The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD panel. Signed-off-by: Alex Gonzalez Reviewed-by: Rob Herring [treding@nvidia.com: sort new entry alphabetically] Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/1540480173-12009-2-git-send-email-alex.gonzalez@digi.com

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

2018-11-13T09:59:10Z

drm-next is forwarded to v4.20-rc1, and we need this to make a patch series apply. Signed-off-by: Maarten Lankhorst

drm/panel: Add simple panel mode for the ARM RTSM

2018-11-02T08:11:20Z

Having failed any attempts at a more generic solution, I fall back to the very specific solution: define a simple panel for the ARM RTSM emulated platforms. I am doing this so we can convert all old users from the previous fbdev driver to the PL111 DRM driver. This works fine as far as I can test, provided the device tree for RTSM AEMv8 is augmented accordingly. Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Mali DP Maintainers Cc: Robin Murphy Reviewed-by: Liviu Dudau Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20181026111334.3365-1-linus.walleij@linaro.org

drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1

2018-10-29T15:53:28Z

As far as I can tell the panel that was added in commit da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") wasn't actually an Innolux TV123WAM but was actually an Innolux P120ZDG-BF1. As far as I can tell the Innolux TV123WAM isn't a real panel and but it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. Let's unmosh. Here's my evidence: * Searching for TV123WAM on the Internet turns up a TI panel. While it's possible that an Innolux panel has the same model number as the TI Panel, it seems a little doubtful. Looking up the datasheet from the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. * As far as I know, the patch adding the Innolux Panel was supposed to be for the board that's sitting in front of me as I type this (support for that board is not yet upstream). On the back of that panel I see Innolux P120ZDZ-EZ1 rev B1. * Someone pointed me at a datasheet that's supposed to be for the panel in front of me (sorry, I can't share the datasheet). That datasheet has the string "p120zdg-bf1" * If I search for "P120ZDG-BF1" on the Internet I get hits for panels that are 2160x1440. They don't have datasheets, but the fact that the resolution matches is a good sign. In any case, let's update the name and also the physical size to match the correct panel. Fixes: da50bd4258db ("drm/panel: simple: Add Innolux TV123WAM panel driver support") Cc: Sandeep Panda Reviewed-by: Abhinav Kumar Reviewed-by: Sean Paul Signed-off-by: Douglas Anderson Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-6-dianders@chromium.org

drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM

2018-10-29T15:53:27Z

If the HPD signal isn't hooked up to this panel we need a 200 ms delay. In the datasheet this is shown as the maximum time that HPD will take to be asserted after power is given to the panel. Reviewed-by: Sean Paul Signed-off-by: Douglas Anderson Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-3-dianders@chromium.org

drm/panel: simple: Support panels with HPD where HPD isn't connected

2018-10-29T15:53:27Z

Some eDP panels that are designed to be always connected to a board use their HPD signal to signal that they've finished powering on and they're ready to be talked to. However, for various reasons it's possible that the HPD signal from the panel isn't actually hooked up. In the case where the HPD isn't hooked up you can look at the timing diagram on the panel datasheet and insert a delay for the maximum amount of time that the HPD might take to come up. Let's add support in simple-panel for this concept. At the moment we will co-opt the existing "prepare" delay to keep track of the delay and we'll use a boolean to specify that a given panel should only apply the delay if the "no-hpd" property was specified. Reviewed-by: Sean Paul Signed-off-by: Douglas Anderson Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-2-dianders@chromium.org

drm/panel: simple: Add DLC1010GIG panel

2018-09-27T12:23:12Z

Add support for the DLC DLC1010GIG 1280x800 10.1" LVDS panel to the simple-panel driver. Signed-off-by: Marco Felsch Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20180924152610.25939-1-m.felsch@pengutronix.de

drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

2018-09-27T12:21:22Z

This panel is marketed as Banana Pi 7" LCD display. On the back is a sticker denoting the model name S070WV20-CT16. This is a 7" 800x480 panel connected through a 24-bit RGB interface. However the panel only does 262k colors. Depending on the variant, the PCB attached to the panel module either supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel itself. Signed-off-by: Chen-Yu Tsai Reviewed-by: Rob Herring Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-5-wens@csie.org