kernel/drivers/gpu/drm/i915/intel_engine_cs.c, branch linux-4.17.y

drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glk

2018-05-16T08:21:09Z

Factor in clear values wherever required while updating destination min/max. References: HSDES#1604444184 Signed-off-by: Michel Thierry Cc: mesa-dev@lists.freedesktop.org Cc: Mika Kuoppala Cc: Oscar Mateo Reviewed-by: Mika Kuoppala Signed-off-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20180510200708.18097-1-michel.thierry@intel.com Cc: stable@vger.kernel.org Cc: Joonas Lahtinen Link: https://patchwork.freedesktop.org/patch/msgid/20180514165445.9198-1-michel.thierry@intel.com (backported from commit 0c79f9cb77eae28d48a4f9fc1b3341aacbbd260c) Signed-off-by: Joonas Lahtinen

drm/i915/icl: new context descriptor support

2018-03-07T13:07:20Z

Starting from Gen11 the context descriptor format has been updated in the HW. The hw_id field has been considerably reduced in size and engine class and instance fields have been added. There is a slight name clashing issue because the field that we call hw_id is actually called SW Context ID in the specs for Gen11+. With the current size of the hw_id field we can have a maximum of 2k contexts at any time, but we could use the sw_counter field (which is sw defined) to increase that because the HW requirement is that engine_id + sw id + sw_counter is a unique number. GuC uses a similar method to support more contexts but does its tracking at lrc level. To avoid doing an implementation that will need to be reworked once GuC support lands, defer it for now and mark it as TODO. v2: rebased, add documentation, fix GEN11_ENGINE_INSTANCE_SHIFT v3: rebased, bring back lost code from i915_gem_context.c v4: make TODO comment more generic v5: be consistent with bit ordering, add extra checks (Chris) Cc: Oscar Mateo Cc: Chris Wilson Cc: Mika Kuoppala Signed-off-by: Daniele Ceraolo Spurio Reviewed-by: Oscar Mateo Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-3-mika.kuoppala@linux.intel.com Signed-off-by: Mika Kuoppala

drm/i915/icl: Correctly initialize the Gen11 engines

2018-03-07T13:07:04Z

Gen11 has up to 4 VCS and up to 2 VECS engines, this patch adds mmio base definitions for all of them. Bspec: 20944 Bspec: 7021 v2: Set the correct mmio_base in intel_engines_init_mmio; updating the base mmio values any later would cause incorrect reads in i915_gem_sanitize (Michel). Cc: Tvrtko Ursulin Cc: Ceraolo Spurio, Daniele Signed-off-by: Oscar Mateo Signed-off-by: Michel Thierry Reviewed-by: Daniele Ceraolo Spurio Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-2-mika.kuoppala@linux.intel.com Signed-off-by: Mika Kuoppala

drm/i915: Don't deref request->ctx inside unlocked print_request()

2018-02-28T14:16:42Z

Although we protect the request itself, we don't lock inside intel_engine_dump() and so the request maybe retired as we peek into it. One consequence is that the request->ctx may be freed before we dereference it, leading to a use-after-free. Replace the hw_id we are peeking from inside request->ctx with the request->fence.context, with which we can still track from which context the request originated (although to tie to HW reports requires a little more legwork, but is good enough to follow the GEM traces). [52640.729670] general protection fault: 0000 [#2] SMP [52640.729694] Dumping ftrace buffer: [52640.729701] (ftrace buffer empty) [52640.729705] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_\ temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel snd_hda_codec snd_hwdep gha\ sh_clmulni_intel snd_hda_core snd_pcm mei_me mei i915 r8169 mii prime_numbers i2c_hid [52640.729748] CPU: 2 PID: 4335 Comm: gem_exec_schedu Tainted: G UD W 4.16.0-rc3+ #7 [52640.729759] Hardware name: Acer Aspire E5-575G/Ironman_SK , BIOS V1.12 08/02/2016 [52640.729803] RIP: 0010:print_request+0x2b/0xb0 [i915] [52640.729811] RSP: 0018:ffffc90001453c18 EFLAGS: 00010206 [52640.729820] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8801e0292d40 RCX: 0000000000000006 [52640.729829] RDX: ffffc90001453c60 RSI: ffff8801e0292d40 RDI: 0000000000000003 [52640.729838] RBP: ffffc90001453d80 R08: 0000000000000000 R09: 0000000000000001 [52640.729847] R10: ffffc90001453bd0 R11: ffffc90001453c73 R12: ffffc90001453c60 [52640.729856] R13: ffffc90001453d80 R14: ffff8801d5a683c8 R15: ffff8801e0292d40 [52640.729866] FS: 00007f1ee50548c0(0000) GS:ffff8801e8200000(0000) knlGS:0000000000000000 [52640.729876] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [52640.729884] CR2: 00007f1ee5077000 CR3: 00000001d9411004 CR4: 00000000003606e0 [52640.729893] Call Trace: [52640.729922] intel_engine_print_registers+0x623/0x890 [i915] [52640.729948] intel_engine_dump+0x4a3/0x590 [i915] [52640.729957] ? seq_printf+0x3a/0x50 [52640.729977] i915_engine_info+0xb8/0xe0 [i915] [52640.729984] ? drm_mode_gamma_get_ioctl+0xf0/0xf0 [52640.729990] seq_read+0xd5/0x410 [52640.729997] full_proxy_read+0x4b/0x70 [52640.730004] __vfs_read+0x1e/0x120 [52640.730009] ? do_sys_open+0x134/0x220 [52640.730015] ? kmem_cache_free+0x174/0x2b0 [52640.730021] vfs_read+0xa1/0x150 [52640.730026] SyS_read+0x40/0xa0 [52640.730032] do_syscall_64+0x65/0x1a0 [52640.730038] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Reported-by: Mika Kuoppala Signed-off-by: Chris Wilson Cc: Mika Kuoppala Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20180228094732.28462-1-chris@chris-wilson.co.uk

drm/i915/preemption: Allow preemption between submission ports

2018-02-23T16:37:40Z

Sometimes we need to boost the priority of an in-flight request, which may lead to the situation where the second submission port then contains a higher priority context than the first and so we need to inject a preemption event. To do so we must always check inside execlists_dequeue() whether there is a priority inversion between the ports themselves as well as the head of the priority sorted queue, and we cannot just skip dequeuing if the queue is empty. As Michał noted, this doesn't simply extend to handling more than 2-port submission, as we may need to reorder within the array of executing requests which themselves are lower priority than the first. A task for later! Signed-off-by: Chris Wilson Cc: Michał Winiarski Cc: Michel Thierry Cc: Mika Kuoppala Cc: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20180222142229.14517-1-chris@chris-wilson.co.uk Reviewed-by: Michał Winiarski Reviewed-by: Mika Kuoppala

drm/i915: Rename drm_i915_gem_request to i915_request

2018-02-21T20:57:22Z

We want to de-emphasize the link between the request (dependency, execution and fence tracking) from GEM and so rename the struct from drm_i915_gem_request to i915_request. That is we may implement the GEM user interface on top of requests, but they are an abstraction for tracking execution rather than an implementation detail of GEM. (Since they are not tied to HW, we keep the i915 prefix as opposed to intel.) In short, the spatch: @@ @@ - struct drm_i915_gem_request + struct i915_request A corollary to contracting the type name, we also harmonise on using 'rq' shorthand for local variables where space if of the essence and repetition makes 'request' unwieldy. For globals and struct members, 'request' is still much preferred for its clarity. Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Mika Kuoppala Cc: Tvrtko Ursulin Cc: Michał Winiarski Cc: Michal Wajdeczko Link: https://patchwork.freedesktop.org/patch/msgid/20180221095636.6649-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala Reviewed-by: Michał Winiarski Acked-by: Joonas Lahtinen

drm/i915: Hold rpm wakeref for printing the engine's register state

2018-02-12T13:33:33Z

When dumping the engine, we print out the current register values. This requires the rpm wakeref. If the device is alseep, we can assume the engine is asleep (and the register state is uninteresting) so skip and only acquire the rpm wakeref if the device is already awake. Reported-by: Tvrtko Ursulin Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Mika Kuoppala Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20180212102415.24246-1-chris@chris-wilson.co.uk

drm/i915: Don't wake the device up to check if the engine is asleep

2018-02-12T10:59:01Z

If the entire device is powered off, we can safely assume that the engine is also asleep (and idle). Reported-by: Tvrtko Ursulin Fixes: a091d4ee931b ("drm/i915: Hold a wakeref for probing the ring registers") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Mika Kuoppala Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20180212093928.6005-1-chris@chris-wilson.co.uk

drm/i915: Remove redundant check on execlists interrupt

2018-02-08T18:30:01Z

Since commit 4a118ecbe99c ("drm/i915: Filter out spurious execlists context-switch interrupts") we probe execlists->active, and no longer have to peek at the execlist interrupt to determine if the tasklet still needs to be run to drain the ELSP. References: 4a118ecbe99c ("drm/i915: Filter out spurious execlists context-switch interrupts") Signed-off-by: Chris Wilson Cc: Michal Winiarski Cc: Tvrtko Ursulin Cc: Mika Kuoppala Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20180208151224.16285-1-chris@chris-wilson.co.uk

drm/i915: Only allocate preempt context when required

2018-02-08T07:30:16Z

If we remove some hardcoded assumptions about the preempt context having a fixed id, reserved from use by normal user contexts, we may only allocate the i915_gem_context when required. Then the subsequent decisions on using preemption reduce to having the preempt context available. v2: Include an assert that we don't allocate the preempt context twice. Signed-off-by: Chris Wilson Cc: Michal Winiarski Cc: Tvrtko Ursulin Cc: Arkadiusz Hiler Cc: Mika Kuoppala Cc: Daniele Ceraolo Spurio Acked-by: Daniele Ceraolo Spurio Link: https://patchwork.freedesktop.org/patch/msgid/20180207210544.26351-3-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry