kernel/drivers/gpu/drm/fsl-dcu, branch linux-4.17.y

drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()

2017-12-05T12:46:41Z

Replace driver's code with the generic helpers that do the same thing. Cc: Stefan Agner Cc: Alison Wang Signed-off-by: Noralf Trønnes Acked-by: Stefan Agner Link: https://patchwork.freedesktop.org/patch/msgid/20171114212517.23536-5-noralf@tronnes.org

Merge tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux

2017-11-24T07:04:56Z

Pull more drm updates from Dave Airlie: "Fixes/cleanups for rc1, non-desktop flags for VR - remove the MSM dt-bindings file Rob managed to push in the previous pull. - add a property/edid quirk to denote HMD devices, I had these hanging around for a few weeks and Keith had done some work on them, they are fairly self contained and small, and only affect people using HTC Vive VR headsets so far. - amdgpu, tegra, tilcdc, fsl fixes - some imx-drm cleanups I missed, these seemed pretty small, and no reason to hold off. I have one TTM regression fix (fixes bochs-vga in qemu) sitting locally awaiting review I'll probably send that in a separate pull request tomorrow" * tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux: (33 commits) dt-bindings: remove file that was added accidentally drm/edid: quirk HTC vive headset as non-desktop. [v2] drm/fb: add support for not enabling fbcon on non-desktop displays [v2] drm: add connector info/property for non-desktop displays [v2] drm/amdgpu: fix rmmod KCQ disable failed error drm/amdgpu: fix kernel hang when starting VNC server drm/amdgpu: don't skip attributes when powerplay is enabled drm/amd/pp: fix typecast error in powerplay. drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding support drm/tegra: sor: Reimplement pad clock Revert "drm/radeon: dont switch vt on suspend" drm/amd/amdgpu: fix over-bound accessing in amdgpu_cs_wait_any_fence drm/amd/powerplay: fix unfreeze level smc message for smu7 drm/amdgpu:fix memleak drm/amdgpu:fix memleak in takedown drm/amd/pp: fix dpm randomly failed on Vega10 drm/amdgpu: set f_mapping on exported DMA-bufs drm/amdgpu: Properly allocate VM invalidate eng v2 drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume() drm/fsl-dcu: avoid disabling pixel clock twice on suspend ...

Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux

2017-11-16T04:42:10Z

Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...

drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()

2017-11-14T16:19:24Z

The resume helpers wait for a vblank to occurre hence IRQ need to be enabled. This avoids a warning as follows during resume: WARNING: CPU: 0 PID: 314 at drivers/gpu/drm/drm_atomic_helper.c:1249 drm_atomic_helper_wait_for_vblanks.part.1+0x284/0x288 [CRTC:28:crtc-0] vblank wait timed out Signed-off-by: Stefan Agner

drm/fsl-dcu: avoid disabling pixel clock twice on suspend

2017-11-14T16:19:23Z

With commit 0a70c998d0c5 ("drm/fsl-dcu: enable pixel clock when enabling CRTC") the pixel clock is controlled by the CRTC code. Disabling the pixel clock in suspend leads to a warning due to the second clk_disable_unprepare call: WARNING: CPU: 0 PID: 359 at drivers/clk/clk.c:594 clk_core_disable+0x8c/0x90 Remove clk_disable_unprepare call for pixel clock to avoid unbalanced clock disable on suspend. Fixes: 0a70c998d0c5 ("drm/fsl-dcu: enable pixel clock when enabling CRTC") Signed-off-by: Stefan Agner

drm/fsl-dcu: Don't set connector DPMS property

2017-11-14T16:15:45Z

Since commit 4a97a3da420b ("drm: Don't update property values for atomic drivers") atomic drivers must not update property values as properties are read from the state instead. To catch remaining users, the drm_object_property_set_value() function now throws a warning when called by atomic drivers on non-immutable properties, and we hit that warning when creating connectors. The easy fix is to just remove the drm_object_property_set_value() as it is used here to set the initial value of the connector's DPMS property to OFF. The DPMS property applies on top of the connector's state crtc pointer (initialized to NULL) that is the main connector on/off control, and should thus default to ON. Fixes: 4a97a3da420b ("drm: Don't update property values for atomic drivers") Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart Signed-off-by: Stefan Agner

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

drm/fsl-dcu: Use drm_gem_fb_create()

2017-10-01T15:00:20Z

drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Stefan Agner Cc: Alison Wang Signed-off-by: Noralf Trønnes Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-3-git-send-email-noralf@tronnes.org

drm: Nuke drm_atomic_helper_connector_dpms

2017-08-08T12:48:48Z

It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter Cc: Archit Taneja Cc: Andrzej Hajda Cc: Laurent Pinchart Cc: Peter Senna Tschudin Cc: Martin Donnelly Cc: Martyn Welch Cc: Daniel Vetter Cc: Jani Nikula Cc: Sean Paul Cc: David Airlie Cc: Inki Dae Cc: Joonyoung Shim Cc: Seung-Woo Kim Cc: Kyungmin Park Cc: Kukjin Kim Cc: Krzysztof Kozlowski Cc: Stefan Agner Cc: Alison Wang Cc: Russell King Cc: Philipp Zabel Cc: CK Hu Cc: Matthias Brugger Cc: Neil Armstrong Cc: Carlo Caione Cc: Kevin Hilman Cc: Marek Vasut Cc: Ben Skeggs Cc: Tomi Valkeinen Cc: Eric Anholt Cc: Mark Yao Cc: Heiko Stuebner Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: Yannick Fertre Cc: Philippe Cornu Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Thierry Reding Cc: Jonathan Hunter Cc: Jyri Sarha Cc: Gerd Hoffmann Cc: Shawn Guo Cc: John Stultz Cc: Lars-Peter Clausen Cc: Sergei Shtylyov Cc: Jeffy Chen Cc: Tomeu Vizoso Cc: Yakir Yang Cc: Marek Szyprowski Cc: Jose Abreu Cc: Romain Perier Cc: Kieran Bingham Cc: Xinliang Liu Cc: Alexey Brodkin Cc: Alex Deucher Cc: Rongrong Zou Cc: Rob Clark Cc: Hai Li Cc: "Noralf Trønnes" Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang Cc: Baoyou Xie Cc: Boris Brezillon Reviewed-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong Reviewed-by: Neil Armstrong Acked-by: Philipp Zabel Acked-by: Archit Taneja Tested-by: Philippe Cornu (on stm) Reviewed-by: Laurent Pinchart Acked-by: Shawn Guo Acked-by: Shawn Guo Acked-by: Noralf Trønnes Acked-by: Vincent Abriou

drm/fsl-dcu: Use .dumb_map_offset and .dumb_destroy defaults

2017-08-04T13:11:27Z

This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Stefan Agner Cc: Alison Wang Signed-off-by: Noralf Trønnes Acked-by: Stefan Agner Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-8-git-send-email-noralf@tronnes.org