kernel/drivers/gpu/drm/drm_edid.c, branch linux-4.1.y

drm/edid: set ELD connector type in drm_edid_to_eld()

2018-05-23T01:33:46Z

[ Upstream commit 1d1c36650752b7fb81cee515a9bba4131cac4b7c ] Since drm_edid_to_eld() knows the connector type, we can set the type in ELD while at it. Most connectors this gets called on are not DP encoders, and with the HDMI type being 0, this does not change behaviour for non-DP. For i915 having this in place earlier would have saved a considerable amount of debugging that lead to the fix 2d8f63297b9f ("drm/i915: always update ELD connector type after get modes"). I don't see other drivers, even the ones calling drm_edid_to_eld() on DP connectors, setting the connector type in ELD. Cc: Alex Deucher Cc: Christian König Cc: Archit Taneja Cc: Andrzej Hajda Cc: Russell King Cc: CK Hu Cc: Philipp Zabel Cc: Ben Skeggs Cc: Mark Yao Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: Thierry Reding Cc: Eric Anholt Reviewed-by: Ville Syrjälä Reviewed-by: Alex Deucher Acked-by: Thierry Reding Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/d527b31619528c477c2c136f25cdf118bc0cfc1d.1509545641.git.jani.nikula@intel.com Signed-off-by: Sasha Levin

Merge tag 'topic/core-stuff-2014-12-10' of git://anongit.freedesktop.org/drm-intel into drm-next

2014-12-11T00:12:57Z

Merge drm core fixes from Daniel. * tag 'topic/core-stuff-2014-12-10' of git://anongit.freedesktop.org/drm-intel: drm: Zero out DRM object memory upon cleanup drm: fix a typo in a comment drm: fix a word repetition in a comment drm: Fix memory leak at error path of drm_read() drm/Documentation: Fix rowspan value in drm-kms-properties drm/edid: Restore kerneldoc consistency drm/edid: new drm_edid_block_checksum helper function V3 drm/edid: shorten log output in case of all zeroes edid block drm/edid: move drm_edid_is_zero to top, make edid argument const

drm/connector: store tile information from displayid (v3)

2014-12-08T23:56:48Z

This creates a tile group from DisplayID block, and stores the pieces of parsed info from the DisplayID block into the connector. v2: add missing signoff, add new connector bits to docs. v3: remove some debugging. Signed-off-by: Dave Airlie

drm/edid: Restore kerneldoc consistency

2014-12-03T16:13:03Z

Commit 18df89fef2d5 ("drm: Decouple EDID parsing from I2C adapter") renamed the adapter parameter of the drm_do_probe_ddc_edid function to data but didn't update the kerneldoc accordingly. Signed-off-by: Thierry Reding Signed-off-by: Daniel Vetter

Merge tag 'drm-intel-next-2014-11-21-fixed' of git://anongit.freedesktop.org/drm-intel into drm-next

2014-12-02T22:25:59Z

drm-intel-next-2014-11-21: - infoframe tracking (for fastboot) from Jesse - start of the dri1/ums support removal - vlv forcewake timeout fixes (Imre) - bunch of patches to polish the rps code (Imre) and improve it on bdw (Tom O'Rourke) - on-demand pinning for execlist contexts - vlv/chv backlight improvements (Ville) - gen8+ render ctx w/a work from various people - skl edp programming (Satheeshakrishna et al.) - psr docbook (Rodrigo) - piles of little fixes and improvements all over, as usual * tag 'drm-intel-next-2014-11-21-fixed' of git://anongit.freedesktop.org/drm-intel: (117 commits) drm/i915: Don't pin LRC in GGTT when dumping in debugfs drm/i915: Update DRIVER_DATE to 20141121 drm/i915/g4x: fix g4x infoframe readout drm/i915: Only call mod_timer() if not already pending drm/i915: Don't rely upon encoder->type for infoframe hw state readout drm/i915: remove the IRQs enabled WARN from intel_disable_gt_powersave drm/i915: Use ggtt error obj capture helper for gen8 semaphores drm/i915: vlv: increase timeout when setting idle GPU freq drm/i915: vlv: fix cdclk setting during modeset while suspended drm/i915: Dump hdmi pipe_config state drm/i915: Gen9 shadowed registers drm/i915/skl: Gen9 multi-engine forcewake drm/i915: Read power well status before other registers for drpc info drm/i915: Pin tiled objects for L-shaped configs drm/i915: Update ring freq for full gpu freq range drm/i915: change initial rps frequency for gen8 drm/i915: Keep min freq above floor on HSW/BDW drm/i915: Use efficient frequency for HSW/BDW drm/i915: Can i915_gem_init_ioctl drm/i915: Sanitize ->lastclose ...

drm/edid: new drm_edid_block_checksum helper function V3

2014-12-01T16:20:22Z

The function will also be used by a later patch, so factor it out. V2: make raw_edid const, define/declare before first use V3: fix erroneuos removal of csum variable Signed-off-by: Stefan Brüns Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter

drm/edid: shorten log output in case of all zeroes edid block

2014-12-01T16:19:35Z

There is no need to dump the whole EDID block in case it contains no information. Just print a single line stating the block is empty instead of 8 lines containing only zeroes. Signed-off-by: Stefan Brüns Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter

drm/edid: move drm_edid_is_zero to top, make edid argument const

2014-12-01T15:50:18Z

drm_edid_is_zero will be used by drm_edid_block valid, move it up. raw_edid argument can be const. Signed-off-by: Stefan Brüns Signed-off-by: Daniel Vetter

drm: Decouple EDID parsing from I2C adapter

2014-11-26T18:09:39Z

The drm_get_edid() function performs direct I2C accesses to read EDID blocks, assuming that the monitor DDC interface is directly connected to the I2C bus. It can't thus be used with HDMI encoders that control the DDC bus and expose EDID blocks through a different interface. Refactor drm_do_get_edid() to take a block read callback function instead of an I2C adapter, and export it for direct use by drivers. As in the general case the DDC bus is accessible by the kernel at the I2C level, drivers must make all reasonable efforts to expose it as an I2C adapter and use drm_get_edid() instead of abusing this function. Signed-off-by: Lars-Peter Clausen Signed-off-by: Laurent Pinchart Reviewed-by: Rob Clark Reviewed-by: Daniel Vetter

drm/edid: fix Baseline_ELD_Len field in drm_edid_to_eld()

2014-11-14T09:29:12Z

The Baseline_ELD_Len field does not include ELD Header Block size. From High Definition Audio Specification, Revision 1.0a: The header block is a fixed size of 4 bytes. The baseline block is variable size in multiple of 4 bytes, and its size is defined in the header block Baseline_ELD_Len field (in number of DWords). Do not include the header size in Baseline_ELD_Len field. Fix all known users of eld[2]. While at it, switch to DIV_ROUND_UP instead of open coding it. Signed-off-by: Jani Nikula Acked-by: Ben Skeggs Reviewed-by: Rodrigo Vivi Acked-by: Dave Airlie [danvet: Fix compile fail in nouveau.] Signed-off-by: Daniel Vetter