kernel/drivers/gpu/drm/ast, branch linux-6.9.y

drm/ast: Fix soft lockup

2024-04-05T08:22:23Z

There is a while-loop in ast_dp_set_on_off() that could lead to infinite-loop. This is because the register, VGACRI-Dx, checked in this API is a scratch register actually controlled by a MCU, named DPMCU, in BMC. These scratch registers are protected by scu-lock. If suc-lock is not off, DPMCU can not update these registers and then host will have soft lockup due to never updated status. DPMCU is used to control DP and relative registers to handshake with host's VGA driver. Even the most time-consuming task, DP's link training, is less than 100ms. 200ms should be enough. Signed-off-by: Jammy Huang Fixes: 594e9c04b586 ("drm/ast: Create the driver for ASPEED proprietory Display-Port") Reviewed-by: Jocelyn Falempe Reviewed-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Cc: KuoHsiang Chou Cc: Thomas Zimmermann Cc: Dave Airlie Cc: Jocelyn Falempe Cc: dri-devel@lists.freedesktop.org Cc: # v5.19+ Link: https://patchwork.freedesktop.org/patch/msgid/20240403090246.1495487-1-jammy_huang@aspeedtech.com

Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2024-01-19T01:29:01Z

Pull i2c updates from Wolfram Sang: "This removes the currently unused CLASS_DDC support (controllers set the flag, but there is no client to use it). Also, CLASS_SPD support gets simplified to prepare removal in the future. Class based instantiation is not recommended these days anyhow. Furthermore, I2C core now creates a debugfs directory per I2C adapter. Current bus driver users were converted to use it. Finally, quite some driver updates. Standing out are patches for the wmt-driver which is refactored to support more variants. This is the rebased pull request where a large series for the designware driver was dropped" * tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) MAINTAINERS: use proper email for my I2C work i2c: stm32f7: add support for stm32mp25 soc i2c: stm32f7: perform I2C_ISR read once at beginning of event isr dt-bindings: i2c: document st,stm32mp25-i2c compatible i2c: stm32f7: simplify status messages in case of errors i2c: stm32f7: perform most of irq job in threaded handler i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq i2c: i801: Add lis3lv02d for Dell XPS 15 7590 i2c: i801: Add lis3lv02d for Dell Precision 3540 i2c: wmt: Reduce redundant: REG_CR setting i2c: wmt: Reduce redundant: function parameter i2c: wmt: Reduce redundant: clock mode setting i2c: wmt: Reduce redundant: wait event complete i2c: wmt: Reduce redundant: bus busy check i2c: mux: reg: Remove class-based device auto-detection support i2c: make i2c_bus_type const dt-bindings: at24: add ROHM BR24G04 eeprom: at24: use of_match_ptr() i2c: cpm: Remove linux,i2c-index conversion from be32 i2c: imx: Make SDA actually optional for bus recovering ...

drm: remove I2C_CLASS_DDC support

2024-01-18T20:10:41Z

After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC. Class-based device auto-detection is a legacy mechanism and shouldn't be used in new code. So we can remove this class completely now. Acked-by: Alex Deucher Acked-by: Dmitry Baryshkov Acked-by: Harry Wentland Acked-by: Heiko Stuebner Acked-by: Jani Nikula Acked-by: Jernej Skrabec Reviewed-by: Thomas Zimmermann Reviewed-by: Andi Shyti Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Neil Armstrong Signed-off-by: Heiner Kallweit Signed-off-by: Wolfram Sang

drm/ast: Move detection code into PCI probe helper

2023-11-28T15:17:08Z

Detect device type and config mode in the PCI probe helper, but leave DRM device initialization where it is. Structures the driver probe and setup code into a detection and an initialization phase. A later patch can add branching to the device-initialization code. Each chip type can have it own initializer function, if necessary. Signed-off-by: Thomas Zimmermann Reviewed-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-11-tzimmermann@suse.de

drm/ast: Detect ast device type and config mode without ast device

2023-11-28T15:17:08Z

Return the ast chip and config in the detection function's parameters instead of storing them directly in the ast device instance. v2: * add break statements to switch default branches (Jocelyn) Signed-off-by: Thomas Zimmermann Reviewed-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-10-tzimmermann@suse.de

drm/ast: Add enum ast_config_mode

2023-11-28T15:17:08Z

The config mode used to be a field in struct ast_device. Turn it into a named type. We'll need this for device detection. Signed-off-by: Thomas Zimmermann Reviewed-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-9-tzimmermann@suse.de

drm/ast: Partially implement POST without ast device instance

2023-11-28T15:17:08Z

We'll have to do some of the GPU POSTing for detecting the ast device type. Make this work without an instance of the ast device. Signed-off-by: Thomas Zimmermann Reviewed-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-8-tzimmermann@suse.de

drm/ast: Enable MMIO without ast device instance

2023-11-28T15:17:08Z

We'll have to enable the MMIO access for detecting the ast device type. Make this work without an instance of the ast device. Signed-off-by: Thomas Zimmermann Reviewed-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-7-tzimmermann@suse.de

drm/ast: Enable VGA without ast device instance

2023-11-28T15:17:08Z

We'll have to enable the VGA functionality for detecting the ast device type. Make this work without an instance of the ast device. Signed-off-by: Thomas Zimmermann Reviewed-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-6-tzimmermann@suse.de

drm/ast: Add I/O helpers without ast device

2023-11-28T15:14:42Z

Implement I/O access in helpers that do not use an ast device instance, but the raw pointer to the I/O memory. We'll later need these helpers to detect the device type before allocating the ast device instance. v3: * fix typo in commit message (Sui) Signed-off-by: Thomas Zimmermann Reviewed-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-5-tzimmermann@suse.de