kernel/drivers/extcon/extcon-max8997.c, branch linux-6.9.y

Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2021-07-05T20:42:16Z

Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...

extcon: max8997: Add missing modalias string

2021-06-21T09:28:00Z

The platform device driver name is "max8997-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: b76668ba8a77 ("Extcon: add MAX8997 extcon driver") Signed-off-by: Marek Szyprowski Signed-off-by: Chanwoo Choi

extcon: extcon-max8997: Simplify driver using devm

2021-06-17T11:22:27Z

Simplify driver by switching to use the resource managed IRQ requesting and resource managed work-queue initialization. Signed-off-by: Matti Vaittinen Reviewed-by: Hans de Goede Acked-by: Chanwoo Choi Link: https://lore.kernel.org/r/61190cc280a63baeb05ec570282bb3677bee8e7b.1623146580.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Hans de Goede

extcon: extcon-max8997: Fix IRQ freeing at error path

2021-06-17T11:22:11Z

If reading MAX8997_MUIC_REG_STATUS1 fails at probe the driver exits without freeing the requested IRQs. Free the IRQs prior returning if reading the status fails. Fixes: 3e34c8198960 ("extcon: max8997: Avoid forcing UART path on drive probe") Signed-off-by: Matti Vaittinen Reviewed-by: Hans de Goede Acked-by: Chanwoo Choi Link: https://lore.kernel.org/r/27ee4a48ee775c3f8c9d90459c18b6f2b15edc76.1623146580.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Hans de Goede

extcon: max8997: Add CHGINS and CHGRM interrupt handling

2021-04-08T04:10:16Z

This allows the MAX8997 charger to set the current limit depending on the detected extcon charger type. Signed-off-by: Timon Baetz Signed-off-by: Chanwoo Choi

extcon: max8997: Return error code of extcon_dev_allocate()

2020-09-24T10:20:49Z

devm_extcon_dev_allocate() can fail of multiple reasons. The call returns proper error code on failure so pass it instead of fixed ENOMEM. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

extcon: max8997: Fix lack of path setting in USB device mode

2018-11-14T00:06:32Z

MAX8997 driver disables automatic path selection from MicroUSB connector and manually sets path to either UART or USB lines. However the code for setting USB path worked only for USB host mode (when ID pin is set to ground). When standard USB cable (USB device mode) is connected, path registers are not touched. This means that once the non-USB accessory is connected to MAX8997-operated micro USB port, the path is no longer set to USB and USB device mode doesn't work. This patch fixes it by setting USB path both for USB and USB host modes. Signed-off-by: Marek Szyprowski Signed-off-by: Chanwoo Choi

extcon: max8997: Avoid forcing UART path on drive probe

2018-11-12T00:17:13Z

Driver unconditionally forces UART path during probe, probably to ensure that one can get kernel serial log as soon as possible. This approach causes some issues, especially when board is booted with non-UART cable connected to micro-USB port. For example, when USB cable is connected, UART TX/RX lines are unconditionally short-circuited to USB D+/D- lines. This is in turn recognized by a series of serial BREAK signals and some random characters when USB host tries to perform enumeration procedure. To solve the above issue and keep UART console operational as early as possible, set UART path only when USB ID reports UART capable cable. Signed-off-by: Marek Szyprowski Signed-off-by: Chanwoo Choi

extcon: maxim: Add SPDX license identifiers

2018-08-28T02:13:20Z

Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

extcon: max8997: Delete unneeded initialization in max8997_muic_set_path()

2017-11-27T01:23:47Z

The variable "ret" will be set to an appropriate value a bit later. Thus this patch omits the explicit initialization at the beginning. Signed-off-by: Markus Elfring Signed-off-by: Chanwoo Choi