kernel/drivers/dma, branch linux-rolling-stable

dmaengine: stm32-mdma: initialize m2m_hw_period and ccr to fix warnings

2026-03-04T12:20:39Z

[ Upstream commit aaf3bc0265744adbc2d364964ef409cf118d193d ] m2m_hw_period is initialized only when chan_config->m2m_hw is true. This triggers a warning: ‘m2m_hw_period’ may be used uninitialized [-Wmaybe-uninitialized] Although m2m_hw_period is only used when chan_config->m2m_hw is true and ignored otherwise, initialize it unconditionally to 0. ccr is initialized by stm32_mdma_set_xfer_param() when the sg list is not empty. This triggers a warning: ‘ccr’ may be used uninitialized [-Wmaybe-uninitialized] Indeed, it could be used uninitialized if the sg list is empty. Initialize it to 0. Signed-off-by: Clément Le Goffic Reviewed-by: Clément Le Goffic Signed-off-by: Amelie Delaunay Link: https://patch.msgid.link/20251217-mdma_warnings_fix-v2-1-340200e0bb55@foss.st.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: sun6i: Choose appropriate burst length under maxburst

2026-03-04T12:20:39Z

[ Upstream commit 7178c3586ab42693b28bb81014320a7783e5c435 ] maxburst, as provided by the client, specifies the largest amount of data that is allowed to be transferred in one burst. This limit is normally provided to avoid a data burst overflowing the target FIFO. It does not mean that the DMA engine can only do bursts in that size. Let the driver pick the largest supported burst length within the given limit. This lets the driver work correctly with some clients that give a large maxburst value. In particular, the 8250_dw driver will give a quarter of the UART's FIFO size as maxburst. On some systems the FIFO size is 256 bytes, giving a maxburst of 64 bytes, while the hardware only supports bursts of up to 16 bytes. Signed-off-by: Chen-Yu Tsai Reviewed-by: Jernej Skrabec Link: https://patch.msgid.link/20251221080450.1813479-1-wens@kernel.org Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: stm32-dma3: use module_platform_driver

2026-03-04T12:20:38Z

[ Upstream commit 0d41ed4ea496fabbb4dc21171e32d9a924c2a661 ] Without module_platform_driver(), stm32-dma3 doesn't have a module_exit procedure. Once stm32-dma3 module is inserted, it can't be removed, marked busy. Use module_platform_driver() instead of subsys_initcall() to register (insmod) and unregister (rmmod) stm32-dma3 driver. Reviewed-by: Eugen Hristev Signed-off-by: Amelie Delaunay Link: https://patch.msgid.link/20251121-dma3_improv-v2-1-76a207b13ea6@foss.st.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: fsl-edma: don't explicitly disable clocks in .remove()

2026-02-26T23:01:27Z

[ Upstream commit 666c53e94c1d0bf0bdf14c49505ece9ddbe725bc ] The clocks in fsl_edma_engine::muxclk are allocated and enabled with devm_clk_get_enabled(), which automatically cleans these resources up, but these clocks are also manually disabled in fsl_edma_remove(). This causes warnings on driver removal for each clock: edma_module already disabled WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1200 clk_core_disable+0x198/0x1c8 [...] Call trace: clk_core_disable+0x198/0x1c8 (P) clk_disable+0x34/0x58 fsl_edma_remove+0x74/0xe8 [fsl_edma] [...] ---[ end trace 0000000000000000 ]--- edma_module already unprepared WARNING: CPU: 0 PID: 418 at drivers/clk/clk.c:1059 clk_core_unprepare+0x1f8/0x220 [...] Call trace: clk_core_unprepare+0x1f8/0x220 (P) clk_unprepare+0x34/0x58 fsl_edma_remove+0x7c/0xe8 [fsl_edma] [...] ---[ end trace 0000000000000000 ]--- Fix these warnings by removing the unnecessary fsl_disable_clocks() call in fsl_edma_remove(). Fixes: a9903de3aa16 ("dmaengine: fsl-edma: refactor using devm_clk_get_enabled") Signed-off-by: Jared Kangas Reviewed-by: Frank Li Link: https://patch.msgid.link/20260113-fsl-edma-clock-removal-v1-1-2025b49e7bcc@redhat.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dma: dma-axi-dmac: fix HW scatter-gather not looking at the queue

2026-02-26T23:01:23Z

[ Upstream commit bbcbafb99df41a1d81403eb4f5bb443b38228b57 ] For HW scatter gather transfers we still need to look for the queue. The HW is capable of queueing 3 concurrent transfers and if we try more than that we'll get the submit queue full and should return. Otherwise, if we go ahead and program the new transfer, we end up discarding it. Fixes: e97dc7435972 ("dmaengine: axi-dmac: Add support for scatter-gather transfers") Signed-off-by: Nuno Sá base-commit: 398035178503bf662281bbffb4bebce1460a4bc5 change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c Acked-by: Michael Hennerich Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-2-3e6fd9328f72@analog.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dma: dma-axi-dmac: fix SW cyclic transfers

2026-02-26T23:01:23Z

[ Upstream commit 9bd257181fd5c996d922e9991500ad27987cfbf4 ] If 'hw_cyclic' is false we should still be able to do cyclic transfers in "software". That was not working for the case where 'desc->num_sgs' is 1 because 'chan->next_desc' is never set with the current desc which means that the cyclic transfer only runs once and in the next SOT interrupt we do nothing since vchan_next_desc() will return NULL. Fix it by setting 'chan->next_desc' as soon as we get a new desc via vchan_next_desc(). Fixes: 0e3b67b348b8 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller") Signed-off-by: Nuno Sá base-commit: 398035178503bf662281bbffb4bebce1460a4bc5 change-id: 20251104-axi-dmac-fixes-and-improvs-e3ad512a329c Acked-by: Michael Hennerich Link: https://patch.msgid.link/20251104-axi-dmac-fixes-and-improvs-v1-1-3e6fd9328f72@analog.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: mediatek: uart-apdma: Fix above 4G addressing TX/RX

2026-02-26T23:01:23Z

[ Upstream commit 58ab9d7b6651d21e1cff1777529f2d3dd0b4e851 ] The VFF_4G_SUPPORT register is named differently in datasheets, and its name is "VFF_ADDR2"; was this named correctly from the beginning it would've been clearer that there was a mistake in the programming sequence. This register is supposed to hold the high bits to support the DMA addressing above 4G (so, more than 32 bits) and not a bit to "enable" the support for VFF 4G. Fix the name of this register, and also fix its usage by writing the upper 32 bits of the dma_addr_t on it when the SoC supports such feature. Fixes: 9135408c3ace ("dmaengine: mediatek: Add MediaTek UART APDMA support") Signed-off-by: AngeloGioacchino Del Regno Link: https://patch.msgid.link/20251113122229.23998-6-angelogioacchino.delregno@collabora.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: apple-admac: Add "apple,t8103-admac" compatible

2026-01-11T16:42:49Z

After discussion with the devicetree maintainers we agreed to not extend lists with the generic compatible "apple,admac" anymore [1]. Use "apple,t8103-admac" as base compatible as it is the SoC the driver and bindings were written for. [1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/ Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver") Cc: stable@vger.kernel.org Reviewed-by: Neal Gompa Signed-off-by: Janne Grunau Link: https://patch.msgid.link/20251231-apple-admac-t8103-base-compat-v1-1-ec24a3708f76@jannau.net Signed-off-by: Vinod Koul

dmaengine: omap-dma: fix dma_pool resource leak in error paths

2026-01-11T16:42:44Z

The dma_pool created by dma_pool_create() is not destroyed when dma_async_device_register() or of_dma_controller_register() fails, causing a resource leak in the probe error paths. Add dma_pool_destroy() in both error paths to properly release the allocated dma_pool resource. Fixes: 7bedaa553760 ("dmaengine: add OMAP DMA engine driver") Signed-off-by: Haotian Zhang Link: https://patch.msgid.link/20251103073018.643-1-vulab@iscas.ac.cn Signed-off-by: Vinod Koul

dmaengine: qcom: gpi: Fix memory leak in gpi_peripheral_config()

2026-01-11T16:42:38Z

Fix a memory leak in gpi_peripheral_config() where the original memory pointed to by gchan->config could be lost if krealloc() fails. The issue occurs when: 1. gchan->config points to previously allocated memory 2. krealloc() fails and returns NULL 3. The function directly assigns NULL to gchan->config, losing the reference to the original memory 4. The original memory becomes unreachable and cannot be freed Fix this by using a temporary variable to hold the krealloc() result and only updating gchan->config when the allocation succeeds. Found via static analysis and code review. Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin Reviewed-by: Bjorn Andersson Link: https://patch.msgid.link/20251029123421.91973-1-linmq006@gmail.com Signed-off-by: Vinod Koul