kernel/drivers/dma/ioat, branch linux-5.1.y

dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4

2019-02-25T06:48:38Z

IOATDMA 3.4 supports PCIe LTR mechanism. The registers are non-standard PCIe LTR support. This needs to be setup in order to not suffer performance impact and provide proper power management. The channel is set to active when it is allocated, and to passive when it's freed. Signed-off-by: Dave Jiang Signed-off-by: Vinod Koul

dmaengine: ioatdma: add descriptor pre-fetch support for v3.4

2019-02-25T06:48:38Z

Adding support for new feature on ioatdma 3.4 hardware that provides descriptor pre-fetching in order to reduce small DMA latencies. Signed-off-by: Dave Jiang Signed-off-by: Vinod Koul

dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4

2019-02-25T06:48:38Z

IOATDMA v3.4 does not support DCA. Disable Signed-off-by: Dave Jiang Signed-off-by: Vinod Koul

dmaengine: ioatdma: Add Snow Ridge ioatdma device id

2019-02-25T06:48:38Z

Add Snowridge Xeon-D ioatdma PCI device id. Also applies for Icelake SP Xeon. This introduces ioatdma v3.4 platform. Also bumping driver version to 5.0 since we are adding additional code for 3.4 support. Signed-off-by: Dave Jiang Signed-off-by: Vinod Koul

Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-10-25T13:50:48Z

Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...

dmaengine: ioat: fix prototype of ioat_enumerate_channels

2018-10-05T14:24:22Z

Signed-off-by: Rami Rosen Signed-off-by: Vinod Koul

PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls

2018-10-02T21:04:40Z

After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas

driver/dma/ioat: Call del_timer_sync() without holding prep_lock

2018-09-18T19:19:36Z

The following lockdep splat was observed: [ 1222.241750] ====================================================== [ 1222.271301] WARNING: possible circular locking dependency detected [ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted [ 1222.326659] ------------------------------------------------------ [ 1222.356565] systemd-shutdow/1 is trying to acquire lock: [ 1222.382660] ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0 [ 1222.422928] [ 1222.422928] but task is already holding lock: [ 1222.451743] (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma] : [ 1223.524987] Chain exists of: [ 1223.524987] (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock [ 1223.524987] [ 1223.594082] Possible unsafe locking scenario: [ 1223.594082] [ 1223.622630] CPU0 CPU1 [ 1223.645080] ---- ---- [ 1223.667404] lock(&(&ioat_chan->prep_lock)->rlock); [ 1223.691535] lock(&(&ioat_chan->cleanup_lock)->rlock); [ 1223.728657] lock(&(&ioat_chan->prep_lock)->rlock); [ 1223.765122] lock((&ioat_chan->timer)); [ 1223.784095] [ 1223.784095] *** DEADLOCK *** [ 1223.784095] [ 1223.813492] 4 locks held by systemd-shutdow/1: [ 1223.834677] #0: (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300 [ 1223.873310] #1: (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660 [ 1223.913604] #2: (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660 [ 1223.954000] #3: (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma] In the ioat_shutdown() function: spin_lock_bh(&ioat_chan->prep_lock); set_bit(IOAT_CHAN_DOWN, &ioat_chan->state); del_timer_sync(&ioat_chan->timer); spin_unlock_bh(&ioat_chan->prep_lock); According to the synchronization rule for the del_timer_sync() function, the caller must not hold locks which would prevent completion of the timer's handler. The timer structure has its own lock that manages its synchronization. Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from trying to use that device anyway, there is probably no need to call del_timer_sync() while holding the prep_lock. So the del_timer_sync() call is now moved outside of the prep_lock critical section to prevent the circular lock dependency. Signed-off-by: Waiman Long Reviewed-by: Dave Jiang Signed-off-by: Vinod Koul

dmaengine: ioatdma: set the completion address register after channel reset

2018-06-19T04:30:16Z

It seems that starting with Skylake Xeon, channel reset clears the completion address register. Make sure the completion address register is set again after reset. Signed-off-by: Dave Jiang Signed-off-by: Vinod Koul

treewide: kzalloc() -> kcalloc()

2018-06-12T23:19:22Z

The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook