kernel/drivers/dma/dw/internal.h, branch linux-rolling-stable

dmaengine: dw: Select only supported masters for ACPI devices

2025-01-02T09:34:13Z

commit f0e870a0e9c5521f2952ea9f3ea9d3d122631a89 upstream. The recently submitted fix-commit revealed a problem in the iDMA 32-bit platform code. Even though the controller supported only a single master the dw_dma_acpi_filter() method hard-coded two master interfaces with IDs 0 and 1. As a result the sanity check implemented in the commit b336268dde75 ("dmaengine: dw: Add peripheral bus width verification") got incorrect interface data width and thus prevented the client drivers from configuring the DMA-channel with the EINVAL error returned. E.g., the next error was printed for the PXA2xx SPI controller driver trying to configure the requested channels: > [ 164.525604] pxa2xx_spi_pci 0000:00:07.1: DMA slave config failed > [ 164.536105] pxa2xx_spi_pci 0000:00:07.1: failed to get DMA TX descriptor > [ 164.543213] spidev spi-SPT0001:00: SPI transfer failed: -16 The problem would have been spotted much earlier if the iDMA 32-bit controller supported more than one master interfaces. But since it supports just a single master and the iDMA 32-bit specific code just ignores the master IDs in the CTLLO preparation method, the issue has been gone unnoticed so far. Fix the problem by specifying the default master ID for both memory and peripheral devices in the driver data. Thus the issue noticed for the iDMA 32-bit controllers will be eliminated and the ACPI-probed DW DMA controllers will be configured with the correct master ID by default. Cc: stable@vger.kernel.org Fixes: b336268dde75 ("dmaengine: dw: Add peripheral bus width verification") Fixes: 199244d69458 ("dmaengine: dw: add support of iDMA 32-bit hardware") Reported-by: Ferry Toth Closes: https://lore.kernel.org/dmaengine/ZuXbCKUs1iOqFu51@black.fi.intel.com/ Reported-by: Andy Shevchenko Closes: https://lore.kernel.org/dmaengine/ZuXgI-VcHpMgbZ91@black.fi.intel.com/ Tested-by: Ferry Toth Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20241104095142.157925-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: dw: Program xBAR hardware for Elkhart Lake

2021-07-14T04:46:30Z

Intel Elkhart Lake PSE DMA implementation is integrated with crossbar IP in order to serve more hardware than there are DMA request lines available. Due to this, program xBAR hardware to make flexible support of PSE peripheral. The Device-to-Device has not been tested and it's not supported by DMA Engine, but it's left in the code for the sake of documenting hardware features. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210712113940.42753-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul

dmaengine: dw: platform: Split OF helpers to separate module

2019-08-21T04:11:28Z

For better maintenance split OF helpers to the separate module. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20190820131546.75744-11-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul

dmaengine: dw: platform: Split ACPI helpers to separate module

2019-08-21T04:11:28Z

For better maintenance split ACPI helpers to the separate module. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20190820131546.75744-10-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul

dmaengine: dw: Export struct dw_dma_chip_pdata for wider use

2019-08-21T04:11:27Z

We are expecting some devices can be enumerated either as PCI or ACPI. Nevertheless, they will share same information, thus, provide a generic struct dw_dma_chip_pdata for all glue drivers. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20190820131546.75744-4-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul

dmaengine: dw: convert to SPDX identifiers

2019-01-07T12:27:13Z

This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: Split DW and iDMA 32-bit operations

2019-01-07T12:27:13Z

Here is a kinda big refactoring that should have been done in the first place, when Intel iDMA 32-bit support appeared. It splits operations which are different to Synopsys DesignWare and Intel iDMA 32-bit controllers. No functional change intended. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: export probe()/remove() and Co to users

2014-10-15T15:01:05Z

The driver library functions can be used directly by the compound devices such as ADSP or serial driver where DesignWare DMA IP is privately attached to the main hardware. Instead of creating a new platform device leaf they may call dw_dma_probe() with given struct dw_dma_chip directly and make sure that the main device is DMA capable. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: always export dw_dma_{en,dis}able

2014-10-15T15:01:04Z

Instead of conditional exporing of dw_dma_suspend() / dw_dma_resume() let's export dw_dma_disable() / dw_dma_enable(). Since dw_dma_shutdown() repeats dw_dma_disable() we may safely remove it at all. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: split dma-dw.h to platform and private parts

2014-10-15T15:01:04Z

The introduced include/linux/dma/dw.h is going to contain the private extensions and structures which are shared for dw_dmac users in the kernel. Meanwhile include/linux/platform_data/dma-dw.h keeps only platform related data types and definitions. Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul