kernel/drivers/crypto/talitos.c, branch linux-5.1.y

crypto: talitos - Align SEC1 accesses to 32 bits boundaries.

2019-07-26T07:12:28Z

[ Upstream commit c9cca7034b34a2d82e9a03b757de2485c294851c ] The MPC885 reference manual states: SEC Lite-initiated 8xx writes can occur only on 32-bit-word boundaries, but reads can occur on any byte boundary. Writing back a header read from a non-32-bit-word boundary will yield unpredictable results. In order to ensure that, cra_alignmask is set to 3 for SEC1. Signed-off-by: Christophe Leroy Fixes: 9c4a79653b35 ("crypto: talitos - Freescale integrated security engine (SEC) driver") Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin

crypto: talitos - properly handle split ICV.

2019-07-26T07:12:28Z

[ Upstream commit eae55a586c3c8b50982bad3c3426e9c9dd7a0075 ] The driver assumes that the ICV is as a single piece in the last element of the scatterlist. This assumption is wrong. This patch ensures that the ICV is properly handled regardless of the scatterlist layout. Fixes: 9c4a79653b35 ("crypto: talitos - Freescale integrated security engine (SEC) driver") Signed-off-by: Christophe Leroy Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin

crypto: talitos - fix skcipher failure due to wrong output IV

2019-07-26T07:12:24Z

[ Upstream commit 3e03e792865ae48b8cfc69a0b4d65f02f467389f ] Selftests report the following: [ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place" [ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41 [ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place" [ 3.043185] 00000000: fe dc ba 98 76 54 32 10 [ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place" [ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42 This above dumps show that the actual output IV is indeed the input IV. This is due to the IV not being copied back into the request. This patch fixes that. Signed-off-by: Christophe Leroy Reviewed-by: Horia Geantă Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin

crypto: talitos - fix hash on SEC1.

2019-07-21T07:02:04Z

commit 58cdbc6d2263beb36954408522762bbe73169306 upstream. On SEC1, hash provides wrong result when performing hashing in several steps with input data SG list has more than one element. This was detected with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS: [ 44.185947] alg: hash: md5-talitos test failed (wrong result) on test vector 6, cfg="random: may_sleep use_finup src_divs=[25.88%@+8063, 24.19%@+9588, 28.63%@+16333, 4.60%@+6756, 16.70%@+16281] dst_divs=[71.61%@alignmask+16361, 14.36%@+7756, 14.3%@+" [ 44.325122] alg: hash: sha1-talitos test failed (wrong result) on test vector 3, cfg="random: inplace use_final src_divs=[16.56%@+16378, 52.0%@+16329, 21.42%@alignmask+16380, 10.2%@alignmask+16380] iv_offset=39" [ 44.493500] alg: hash: sha224-talitos test failed (wrong result) on test vector 4, cfg="random: use_final nosimd src_divs=[52.27%@+7401, 17.34%@+16285, 17.71%@+26, 12.68%@+10644] iv_offset=43" [ 44.673262] alg: hash: sha256-talitos test failed (wrong result) on test vector 4, cfg="random: may_sleep use_finup src_divs=[60.6%@+12790, 17.86%@+1329, 12.64%@alignmask+16300, 8.29%@+15, 0.40%@+13506, 0.51%@+16322, 0.24%@+16339] dst_divs" This is due to two issues: - We have an overlap between the buffer used for copying the input data (SEC1 doesn't do scatter/gather) and the chained descriptor. - Data copy is wrong when the previous hash left less than one blocksize of data to hash, implying a complement of the previous block with a few bytes from the new request. Fix it by: - Moving the second descriptor after the buffer, as moving the buffer after the descriptor would make it more complex for other cipher operations (AEAD, ABLKCIPHER) - Skip the bytes taken from the new request to complete the previous one by moving the SG list forward. Fixes: 37b5e8897eb5 ("crypto: talitos - chain in buffered data for ahash on SEC1") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: talitos - move struct talitos_edesc into talitos.h

2019-07-21T07:02:04Z

commit d44769e4ccb636e8238adbc151f25467a536711b upstream. Moves struct talitos_edesc into talitos.h so that it can be used from any place in talitos.c It will be required for next patch ("crypto: talitos - fix hash on SEC1") Signed-off-by: Christophe Leroy Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: talitos - rename alternative AEAD algos.

2019-07-14T06:09:34Z

commit a1a42f84011fae6ff08441a91aefeb7febc984fc upstream. The talitos driver has two ways to perform AEAD depending on the HW capability. Some HW support both. It is needed to give them different names to distingish which one it is for instance when a test fails. Signed-off-by: Christophe Leroy Fixes: 7405c8d7ff97 ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: clarify name of WEAK_KEY request flag

2019-01-25T10:41:52Z

CRYPTO_TFM_REQ_WEAK_KEY confuses newcomers to the crypto API because it sounds like it is requesting a weak key. Actually, it is requesting that weak keys be forbidden (for algorithms that have the notion of "weak keys"; currently only DES and XTS do). Also it is only one letter away from CRYPTO_TFM_RES_WEAK_KEY, with which it can be easily confused. (This in fact happened in the UX500 driver, though just in some debugging messages.) Therefore, make the intent clear by renaming it to CRYPTO_TFM_REQ_FORBID_WEAK_KEYS. Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu

crypto: talitos - fix ablkcipher for CONFIG_VMAP_STACK

2019-01-10T13:37:32Z

[ 2.364486] WARNING: CPU: 0 PID: 60 at ./arch/powerpc/include/asm/io.h:837 dma_nommu_map_page+0x44/0xd4 [ 2.373579] CPU: 0 PID: 60 Comm: cryptomgr_test Tainted: G W 4.20.0-rc5-00560-g6bfb52e23a00-dirty #531 [ 2.384740] NIP: c000c540 LR: c000c584 CTR: 00000000 [ 2.389743] REGS: c95abab0 TRAP: 0700 Tainted: G W (4.20.0-rc5-00560-g6bfb52e23a00-dirty) [ 2.400042] MSR: 00029032 CR: 24042204 XER: 00000000 [ 2.406669] [ 2.406669] GPR00: c02f2244 c95abb60 c6262990 c95abd80 0000256a 00000001 00000001 00000001 [ 2.406669] GPR08: 00000000 00002000 00000010 00000010 24042202 00000000 00000100 c95abd88 [ 2.406669] GPR16: 00000000 c05569d4 00000001 00000010 c95abc88 c0615664 00000004 00000000 [ 2.406669] GPR24: 00000010 c95abc88 c95abc88 00000000 c61ae210 c7ff6d40 c61ae210 00003d68 [ 2.441559] NIP [c000c540] dma_nommu_map_page+0x44/0xd4 [ 2.446720] LR [c000c584] dma_nommu_map_page+0x88/0xd4 [ 2.451762] Call Trace: [ 2.454195] [c95abb60] [82000808] 0x82000808 (unreliable) [ 2.459572] [c95abb80] [c02f2244] talitos_edesc_alloc+0xbc/0x3c8 [ 2.465493] [c95abbb0] [c02f2600] ablkcipher_edesc_alloc+0x4c/0x5c [ 2.471606] [c95abbd0] [c02f4ed0] ablkcipher_encrypt+0x20/0x64 [ 2.477389] [c95abbe0] [c02023b0] __test_skcipher+0x4bc/0xa08 [ 2.483049] [c95abe00] [c0204b60] test_skcipher+0x2c/0xcc [ 2.488385] [c95abe20] [c0204c48] alg_test_skcipher+0x48/0xbc [ 2.494064] [c95abe40] [c0205cec] alg_test+0x164/0x2e8 [ 2.499142] [c95abf00] [c0200dec] cryptomgr_test+0x48/0x50 [ 2.504558] [c95abf10] [c0039ff4] kthread+0xe4/0x110 [ 2.509471] [c95abf40] [c000e1d0] ret_from_kernel_thread+0x14/0x1c [ 2.515532] Instruction dump: [ 2.518468] 7c7e1b78 7c9d2378 7cbf2b78 41820054 3d20c076 8089c200 3d20c076 7c84e850 [ 2.526127] 8129c204 7c842e70 7f844840 419c0008 <0fe00000> 2f9e0000 54847022 7c84fa14 [ 2.533960] ---[ end trace bf78d94af73fe3b8 ]--- [ 2.539123] talitos ff020000.crypto: master data transfer error [ 2.544775] talitos ff020000.crypto: TEA error: ISR 0x20000000_00000040 [ 2.551625] alg: skcipher: encryption failed on test 1 for ecb-aes-talitos: ret=22 IV cannot be on stack when CONFIG_VMAP_STACK is selected because the stack cannot be DMA mapped anymore. This patch copies the IV into the extended descriptor. Fixes: 4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy Reviewed-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: talitos - reorder code in talitos_edesc_alloc()

2019-01-10T13:37:32Z

This patch moves the mapping of IV after the kmalloc(). This avoids having to unmap in case kmalloc() fails. Signed-off-by: Christophe Leroy Reviewed-by: Horia Geantă Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu

crypto: skcipher - remove remnants of internal IV generators

2018-12-23T03:52:45Z

Remove dead code related to internal IV generators, which are no longer used since they've been replaced with the "seqiv" and "echainiv" templates. The removed code includes: - The "givcipher" (GIVCIPHER) algorithm type. No algorithms are registered with this type anymore, so it's unneeded. - The "const char *geniv" member of aead_alg, ablkcipher_alg, and blkcipher_alg. A few algorithms still set this, but it isn't used anymore except to show via /proc/crypto and CRYPTO_MSG_GETALG. Just hardcode "" or "" in those cases. - The 'skcipher_givcrypt_request' structure, which is never used. Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu