kernel/drivers/crypto/caam/intern.h, branch linux-5.1.y

crypto: caam - no need to check return value of debugfs_create functions

2019-02-01T06:42:03Z

When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: "Horia Geantă" Cc: Aymen Sghaier Cc: Herbert Xu Cc: "David S. Miller" Cc: linux-crypto@vger.kernel.org Signed-off-by: Greg Kroah-Hartman Reviewed-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: caam - fix MC firmware detection

2018-05-30T16:13:46Z

Management Complex (MC) f/w detection is based on CTPR_MS[DPAA2] bit. This is incorrect since: -the bit is set for all CAAM blocks integrated in SoCs with a certain Layerscape Chassis -some SoCs with LS Chassis don't have an MC block (thus no MC f/w) To fix this, MC f/w detection will be based on the presence of "fsl,qoriq-mc" compatible string in the device tree. Fixes: 297b9cebd2fc0 ("crypto: caam/jr - add support for DPAA2 parts") Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: caam - save Era in driver's private data

2017-12-28T06:56:47Z

Save Era in driver's private data for further usage, like deciding whether an erratum applies or a feature is available based on its value. Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

crypto: caam - Remove unused dentry members

2017-08-09T12:18:29Z

Most of the dentry members from structure caam_drv_private are never used at all, so it is safe to remove them. Since debugfs_remove_recursive() is called, we don't need the file entries. Signed-off-by: Fabio Estevam Acked-by: Horia Geantă Signed-off-by: Herbert Xu

crypto: caam - remove unused variables in caam_drv_private

2017-07-18T10:16:06Z

Signed-off-by: Tudor Ambarus Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2017-04-05T13:57:07Z

Merge the crypto tree to resolve conflict between caam changes.

crypto: caam - fix JR platform device subsequent (re)creations

2017-04-05T13:20:15Z

The way Job Ring platform devices are created and released does not allow for multiple create-release cycles. JR0 Platform device creation error JR0 Platform device creation error caam 2100000.caam: no queues configured, terminating caam: probe of 2100000.caam failed with error -12 The reason is that platform devices are created for each job ring: for_each_available_child_of_node(nprop, np) if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") || of_device_is_compatible(np, "fsl,sec4.0-job-ring")) { ctrlpriv->jrpdev[ring] = of_platform_device_create(np, NULL, dev); which sets OF_POPULATED on the device node, but then it cleans these up: /* Remove platform devices for JobRs */ for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) { if (ctrlpriv->jrpdev[ring]) of_device_unregister(ctrlpriv->jrpdev[ring]); } which leaves OF_POPULATED set. Use of_platform_populate / of_platform_depopulate instead. This allows for a bit of driver clean-up, jrpdev is no longer needed. Logic changes a bit too: -exit in case of_platform_populate fails, since currently even QI backend depends on JR; true, we no longer support the case when "some" of the JR DT nodes are incorrect -when cleaning up, caam_remove() would also depopulate RTIC in case it would have been populated somewhere else - not the case for now Cc: Fixes: 313ea293e9c4d ("crypto: caam - Add Platform driver for Job Ring") Reported-by: Russell King Suggested-by: Rob Herring Signed-off-by: Horia Geantă Acked-by: Rob Herring Signed-off-by: Herbert Xu

crypto: caam - add Queue Interface (QI) backend support

2017-03-24T14:02:59Z

CAAM engine supports two interfaces for crypto job submission: -job ring interface - already existing caam/jr driver -Queue Interface (QI) - caam/qi driver added in current patch QI is present in CAAM engines found on DPAA platforms. QI gets its I/O (frame descriptors) from QMan (Queue Manager) queues. This patch adds a platform device for accessing CAAM's queue interface. The requests are submitted to CAAM using one frame queue per cryptographic context. Each crypto context has one shared descriptor. This shared descriptor is attached to frame queue associated with corresponding driver context using context_a. The driver hides the mechanics of FQ creation, initialisation from its applications. Each cryptographic context needs to be associated with driver context which houses the FQ to be used to transport the job to CAAM. The driver provides API for: (a) Context creation (b) Job submission (c) Context deletion (d) Congestion indication - whether path to/from CAAM is congested The driver supports affining its context to a particular CPU. This means that any responses from CAAM for the context in question would arrive at the given CPU. This helps in implementing one CPU per packet round trip in IPsec application. The driver processes CAAM responses under NAPI contexts. NAPI contexts are instantiated only on cores with affined portals since only cores having their own portal can receive responses from DQRR. The responses from CAAM for all cryptographic contexts ride on a fixed set of FQs. We use one response FQ per portal owning core. The response FQ is configured in each core's and thus portal's dedicated channel. This gives the flexibility to direct CAAM's responses for a crypto context on a given core. Signed-off-by: Vakul Garg Signed-off-by: Alex Porosanu Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu

Revert "crypto: caam - get rid of tasklet"

2016-11-13T09:45:13Z

This reverts commit 66d2e2028091a074aa1290d2eeda5ddb1a6c329c. Quoting from Russell's findings: https://www.mail-archive.com/linux-crypto@vger.kernel.org/msg21136.html [quote] Okay, I've re-tested, using a different way of measuring, because using openssl speed is impractical for off-loaded engines. I've decided to use this way to measure the performance: dd if=/dev/zero bs=1048576 count=128 | /usr/bin/time openssl dgst -md5 For the threaded IRQs case gives: 0.05user 2.74system 0:05.30elapsed 52%CPU (0avgtext+0avgdata 2400maxresident)k 0.06user 2.52system 0:05.18elapsed 49%CPU (0avgtext+0avgdata 2404maxresident)k 0.12user 2.60system 0:05.61elapsed 48%CPU (0avgtext+0avgdata 2460maxresident)k => 5.36s => 25.0MB/s and the tasklet case: 0.08user 2.53system 0:04.83elapsed 54%CPU (0avgtext+0avgdata 2468maxresident)k 0.09user 2.47system 0:05.16elapsed 49%CPU (0avgtext+0avgdata 2368maxresident)k 0.10user 2.51system 0:04.87elapsed 53%CPU (0avgtext+0avgdata 2460maxresident)k => 4.95 => 27.1MB/s which corresponds to an 8% slowdown for the threaded IRQ case. So, tasklets are indeed faster than threaded IRQs. [...] I think I've proven from the above that this patch needs to be reverted due to the performance regression, and that there _is_ most definitely a deterimental effect of switching from tasklets to threaded IRQs. [/quote] Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu