kernel/drivers/crypto/amcc, branch linux-5.1.y

crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe

2019-07-26T07:12:54Z

commit 95566aa75cd6b3b404502c06f66956b5481194b3 upstream. There is a possible double free issue in ppc4xx_trng_probe(): 85: dev->trng_base = of_iomap(trng, 0); 86: of_node_put(trng); ---> released here 87: if (!dev->trng_base) 88: goto err_out; ... 110: ierr_out: 111: of_node_put(trng); ---> double released here ... This issue was detected by using the Coccinelle software. We fix it by removing the unnecessary of_node_put(). Fixes: 5343e674f32f ("crypto4xx: integrate ppc4xx-rng into crypto4xx") Signed-off-by: Wen Yang Cc: Cc: "David S. Miller" Cc: Thomas Gleixner Cc: Greg Kroah-Hartman Cc: Allison Randal Cc: Armijn Hemel Cc: Julia Lawall Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Julia Lawall Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: crypto4xx - block ciphers should only accept complete blocks

2019-07-26T07:12:53Z

commit 0f7a81374060828280fcfdfbaa162cb559017f9f upstream. The hardware automatically zero pads incomplete block ciphers blocks without raising any errors. This is a screw-up. This was noticed by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS tests that sent a incomplete blocks and expect them to fail. This fixes: cbc-aes-ppc4xx encryption unexpectedly succeeded on test vector "random: len=2409 klen=32"; expected_error=-22, cfg="random: may_sleep use_digest src_divs=[96.90%@+2295, 2.34%@+4066, 0.32%@alignmask+12, 0.34%@+4087, 0.9%@alignmask+1787, 0.1%@+3767] iv_offset=6" ecb-aes-ppc4xx encryption unexpectedly succeeded on test vector "random: len=1011 klen=32"; expected_error=-22, cfg="random: may_sleep use_digest src_divs=[100.0%@alignmask+20] dst_divs=[3.12%@+3001, 96.88%@+4070]" Cc: Eric Biggers Cc: stable@vger.kernel.org [4.19, 5.0 and 5.1] Signed-off-by: Christian Lamparter Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: crypto4xx - fix blocksize for cfb and ofb

2019-07-26T07:12:53Z

commit 70c4997f34b6c6888b3ac157adec49e01d0df2d5 upstream. While the hardware consider them to be blockciphers, the reference implementation defines them as streamciphers. Do the right thing and set the blocksize to 1. This was found by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS. This fixes the following issues: skcipher: blocksize for ofb-aes-ppc4xx (16) doesn't match generic impl (1) skcipher: blocksize for cfb-aes-ppc4xx (16) doesn't match generic impl (1) Cc: Eric Biggers Cc: stable@vger.kernel.org Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads") Signed-off-by: Christian Lamparter Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: crypto4xx - fix AES CTR blocksize value

2019-07-26T07:12:53Z

commit bfa2ba7d9e6b20aca82b99e6842fe18842ae3a0f upstream. This patch fixes a issue with crypto4xx's ctr(aes) that was discovered by libcapi's kcapi-enc-test.sh test. The some of the ctr(aes) encryptions test were failing on the non-power-of-two test: kcapi-enc - Error: encryption failed with error 0 kcapi-enc - Error: decryption failed with error 0 [FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits): original file (1d100e..cc96184c) and generated file (e3b0c442..1b7852b855) [FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits) (openssl generated CT): original file (e3b0..5) and generated file (3..8e) [PASSED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits) (openssl generated PT) [FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (password): original file (1d1..84c) and generated file (e3b..852b855) But the 16, 32, 512, 65536 tests always worked. Thankfully, this isn't a hidden hardware problem like previously, instead this turned out to be a copy and paste issue. With this patch, all the tests are passing with and kcapi-enc-test.sh gives crypto4xx's a clean bill of health: "Number of failures: 0" :). Cc: stable@vger.kernel.org Fixes: 98e87e3d933b ("crypto: crypto4xx - add aes-ctr support") Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads") Signed-off-by: Christian Lamparter Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues

2019-05-22T05:39:41Z

commit 7e92e1717e3eaf6b322c252947c696b3059f05be upstream. Currently, crypto4xx CFB and OFB AES ciphers are failing testmgr's test vectors. |cfb-aes-ppc4xx encryption overran dst buffer on test vector 3, cfg="in-place" |ofb-aes-ppc4xx encryption overran dst buffer on test vector 1, cfg="in-place" This is because of a very subtile "bug" in the hardware that gets indirectly mentioned in 18.1.3.5 Encryption/Decryption of the hardware spec: the OFB and CFB modes for AES are listed there as operation modes for >>> "Block ciphers" <<<. Which kind of makes sense, but we would like them to be considered as stream ciphers just like the CTR mode. To workaround this issue and stop the hardware from causing "overran dst buffer" on crypttexts that are not a multiple of 16 (AES_BLOCK_SIZE), we force the driver to use the scatter buffers as the go-between. As a bonus this patch also kills redundant pd_uinfo->num_gd and pd_uinfo->num_sd setters since the value has already been set before. Cc: stable@vger.kernel.org Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads") Signed-off-by: Christian Lamparter Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: crypto4xx - fix ctr-aes missing output IV

2019-05-22T05:39:41Z

commit 25baaf8e2c93197d063b372ef7b62f2767c7ac0b upstream. Commit 8efd972ef96a ("crypto: testmgr - support checking skcipher output IV") caused the crypto4xx driver to produce the following error: | ctr-aes-ppc4xx encryption test failed (wrong output IV) | on test vector 0, cfg="in-place" This patch fixes this by reworking the crypto4xx_setkey_aes() function to: - not save the iv for ECB (as per 18.2.38 CRYP0_SA_CMD_0: "This bit mut be cleared for DES ECB mode or AES ECB mode, when no IV is used.") - instruct the hardware to save the generated IV for all other modes of operations that have IV and then supply it back to the callee in pretty much the same way as we do it for cbc-aes already. - make it clear that the DIR_(IN|OUT)BOUND is the important bit that tells the hardware to encrypt or decrypt the data. (this is cosmetic - but it hopefully prevents me from getting confused again). - don't load any bogus hash when we don't use any hash operation to begin with. Cc: stable@vger.kernel.org Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads") Signed-off-by: Christian Lamparter Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2019-03-05T17:09:55Z

Pull crypto update from Herbert Xu: "API: - Add helper for simple skcipher modes. - Add helper to register multiple templates. - Set CRYPTO_TFM_NEED_KEY when setkey fails. - Require neither or both of export/import in shash. - AEAD decryption test vectors are now generated from encryption ones. - New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random fuzzing. Algorithms: - Conversions to skcipher and helper for many templates. - Add more test vectors for nhpoly1305 and adiantum. Drivers: - Add crypto4xx prng support. - Add xcbc/cmac/ecb support in caam. - Add AES support for Exynos5433 in s5p. - Remove sha384/sha512 from artpec7 as hardware cannot do partial hash" [ There is a merge of the Freescale SoC tree in order to pull in changes required by patches to the caam/qi2 driver. ] * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits) crypto: s5p - add AES support for Exynos5433 dt-bindings: crypto: document Exynos5433 SlimSSS crypto: crypto4xx - add missing of_node_put after of_device_is_available crypto: cavium/zip - fix collision with generic cra_driver_name crypto: af_alg - use struct_size() in sock_kfree_s() crypto: caam - remove redundant likely/unlikely annotation crypto: s5p - update iv after AES-CBC op end crypto: x86/poly1305 - Clear key material from stack in SSE2 variant crypto: caam - generate hash keys in-place crypto: caam - fix DMA mapping xcbc key twice crypto: caam - fix hash context DMA unmap size hwrng: bcm2835 - fix probe as platform device crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number crypto: stm32 - drop pointless static qualifier in stm32_hash_remove() crypto: chelsio - Fixed Traffic Stall crypto: marvell - Remove set but not used variable 'ivsize' crypto: ccp - Update driver messages to remove some confusion crypto: adiantum - add 1536 and 4096-byte test vectors crypto: nhpoly1305 - add a test vector with len % 16 != 0 crypto: arm/aes-ce - update IV after partial final CTR block ...

crypto: crypto4xx - add missing of_node_put after of_device_is_available

2019-02-28T06:37:35Z

Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // Fixes: 5343e674f32fb ("crypto4xx: integrate ppc4xx-rng into crypto4xx") Signed-off-by: Julia Lawall Signed-off-by: Herbert Xu

crypto: crypto4xx - Fix wrong ppc4xx_trng_probe()/ppc4xx_trng_remove() arguments

2019-02-01T06:42:04Z

When building without CONFIG_HW_RANDOM_PPC4XX, I hit the following build failure: drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_probe': drivers/crypto/amcc/crypto4xx_core.c:1407:20: error: passing argument 1 of 'ppc4xx_trng_probe' from incompatible pointer type [-Werror=incompatible-pointer-types] In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0: drivers/crypto/amcc/crypto4xx_trng.h:28:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *' drivers/crypto/amcc/crypto4xx_core.c: In function 'crypto4xx_remove': drivers/crypto/amcc/crypto4xx_core.c:1434:21: error: passing argument 1 of 'ppc4xx_trng_remove' from incompatible pointer type [-Werror=incompatible-pointer-types] In file included from drivers/crypto/amcc/crypto4xx_core.c:50:0: drivers/crypto/amcc/crypto4xx_trng.h:30:20: note: expected 'struct crypto4xx_device *' but argument is of type 'struct crypto4xx_core_device *' This patch fix the needed argument of ppc4xx_trng_probe()/ppc4xx_trng_remove() in that case. Fixes: 5343e674f32f ("crypto4xx: integrate ppc4xx-rng into crypto4xx") Signed-off-by: Corentin Labbe Signed-off-by: Herbert Xu

crypto: crypto4xx - add prng crypto support

2019-01-11T06:16:56Z

This patch adds support for crypto4xx's ANSI X9.17 Annex C compliant pseudo random number generator which provides a pseudo random source for the purpose of generating Initialization Vectors (IV's) for AES algorithms to the Packet Engine and other pseudo random number requirements. Signed-off-by: Christian Lamparter Signed-off-by: Herbert Xu