kernel/drivers/clocksource, branch linux-6.2.y

clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails

2023-05-11T14:11:29Z

[ Upstream commit fb73556386e074e9bee9fa2d253aeaefe4e063e0 ] Smatch reports: drivers/clocksource/timer-davinci.c:332 davinci_timer_register() warn: 'base' from ioremap() not released on lines: 274. Fix this and other potential memory leak problems by adding a set of corresponding exit lables. Fixes: 721154f972aa ("clocksource/drivers/davinci: Add support for clockevents") Signed-off-by: Qinrun Dai Link: https://lore.kernel.org/r/20230413135037.1505799-1-flno@hust.edu.cn Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use

2023-03-10T08:28:19Z

[ Upstream commit 225b9596cb0227c1c1b1e4a836dad43595c3e61a ] A static key is used to select between SBI and Sstc timer usage in riscv_clock_next_event(), but currently the direction is resolved after cpuhp_setup_state() is called (which sets the next event). The first event will therefore fall through the sbi_set_timer() path; this breaks Sstc-only systems. So, apply the jump patching before first use. Fixes: 9f7a8ff6391f ("RISC-V: Prefer sstc extension if available") Signed-off-by: Matt Evans Reviewed-by: Palmer Dabbelt Acked-by: Palmer Dabbelt Reviewed-by: Anup Patel Link: https://lore.kernel.org/r/CDDAB2D0-264E-42F3-8E31-BA210BEB8EC1@rivosinc.com Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin

Merge tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2022-12-12T20:52:02Z

Pull timer updates from Thomas Gleixner: "Updates for timers, timekeeping and drivers: Core: - The timer_shutdown[_sync]() infrastructure: Tearing down timers can be tedious when there are circular dependencies to other things which need to be torn down. A prime example is timer and workqueue where the timer schedules work and the work arms the timer. What needs to prevented is that pending work which is drained via destroy_workqueue() does not rearm the previously shutdown timer. Nothing in that shutdown sequence relies on the timer being functional. The conclusion was that the semantics of timer_shutdown_sync() should be: - timer is not enqueued - timer callback is not running - timer cannot be rearmed Preventing the rearming of shutdown timers is done by discarding rearm attempts silently. A warning for the case that a rearm attempt of a shutdown timer is detected would not be really helpful because it's entirely unclear how it should be acted upon. The only way to address such a case is to add 'if (in_shutdown)' conditionals all over the place. This is error prone and in most cases of teardown not required all. - The real fix for the bluetooth HCI teardown based on timer_shutdown_sync(). A larger scale conversion to timer_shutdown_sync() is work in progress. - Consolidation of VDSO time namespace helper functions - Small fixes for timer and timerqueue Drivers: - Prevent integer overflow on the XGene-1 TVAL register which causes an never ending interrupt storm. - The usual set of new device tree bindings - Small fixes and improvements all over the place" * tag 'timers-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) dt-bindings: timer: renesas,cmt: Add r8a779g0 CMT support dt-bindings: timer: renesas,tmu: Add r8a779g0 support clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool() clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock() clocksource/drivers/timer-ti-dm: Clear settings on probe and free clocksource/drivers/timer-ti-dm: Make timer_get_irq static clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error clocksource/drivers/timer-npcm7xx: Enable timer 1 clock before use dt-bindings: timer: nuvoton,npcm7xx-timer: Allow specifying all clocks dt-bindings: timer: rockchip: Add rockchip,rk3128-timer clockevents: Repair kernel-doc for clockevent_delta2ns() clocksource/drivers/ingenic-ost: Define pm functions properly in platform_driver struct clocksource/drivers/sh_cmt: Access registers according to spec vdso/timens: Refactor copy-pasted find_timens_vvar_page() helper into one copy Bluetooth: hci_qca: Fix the teardown problem for real timers: Update the documentation to reflect on the new timer_shutdown() API timers: Provide timer_shutdown[_sync]() timers: Add shutdown mechanism to the internal functions timers: Split [try_to_]del_timer[_sync]() to prepare for shutdown mode ...

Merge tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

2022-12-12T17:34:16Z

Pull hyperv updates from Wei Liu: - Drop unregister syscore from hyperv_cleanup to avoid hang (Gaurav Kohli) - Clean up panic path for Hyper-V framebuffer (Guilherme G. Piccoli) - Allow IRQ remapping to work without x2apic (Nuno Das Neves) - Fix comments (Olaf Hering) - Expand hv_vp_assist_page definition (Saurabh Sengar) - Improvement to page reporting (Shradha Gupta) - Make sure TSC clocksource works when Linux runs as the root partition (Stanislav Kinsburskiy) * tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Remove unregister syscore call from Hyper-V cleanup iommu/hyper-v: Allow hyperv irq remapping without x2apic clocksource: hyper-v: Add TSC page support for root partition clocksource: hyper-v: Use TSC PFN getter to map vvar page clocksource: hyper-v: Introduce TSC PFN getter clocksource: hyper-v: Introduce a pointer to TSC page x86/hyperv: Expand definition of struct hv_vp_assist_page PCI: hv: update comment in x86 specific hv_arch_irq_unmask hv: fix comment typo in vmbus_channel/low_latency drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers video: hyperv_fb: Avoid taking busy spinlock on panic path hv_balloon: Add support for configurable order free page reporting mm/page_reporting: Add checks for page_reporting_order param

clocksource/drivers/arm_arch_timer: Use kstrtobool() instead of strtobool()

2022-12-02T12:17:34Z

strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file () Signed-off-by: Christophe JAILLET Acked-by: Mark Rutland Link: https://lore.kernel.org/r/f430bb12e12eb225ab1206db0be64b755ddafbdc.1667336095.git.christophe.jaillet@wanadoo.fr Signed-off-by: Daniel Lezcano

clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()

2022-12-02T12:16:46Z

If clk_get_rate() fails which is called after clk_prepare_enable(), clk_disable_unprepare() need be called in error path to disable the clock in dmtimer_systimer_init_clock(). Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Signed-off-by: Yang Yingliang Reviewed-by: Tony Lindgren Link: https://lore.kernel.org/r/20221029114427.946520-1-yangyingliang@huawei.com Signed-off-by: Daniel Lezcano

clocksource/drivers/timer-ti-dm: Clear settings on probe and free

2022-12-02T12:16:46Z

Clear the timer control register on driver probe and omap_dm_timer_free(). Otherwise we assume the consumer driver takes care of properly initializing timer interrupts on PWM driver module reload for example. AFAIK this is not currently needed as a fix, I just happened to run into this while cleaning up things. Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20221028103813.40783-1-tony@atomide.com Signed-off-by: Daniel Lezcano

clocksource/drivers/timer-ti-dm: Make timer_get_irq static

2022-12-02T12:16:46Z

We can make timer_get_irq() static as noted by Janusz. It is only used by omap_rproc_get_timer_irq() via platform data. Reported-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20221028103604.40385-1-tony@atomide.com Signed-off-by: Daniel Lezcano

clocksource/drivers/timer-ti-dm: Fix warning for omap_timer_match

2022-12-02T12:16:46Z

We can now get a warning for 'omap_timer_match' defined but not used. Let's fix this by dropping of_match_ptr for omap_timer_match. Reported-by: kernel test robot Fixes: ab0bbef3ae0f ("clocksource/drivers/timer-ti-dm: Make timer selectable for ARCH_K3") Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20221028103526.40319-1-tony@atomide.com Signed-off-by: Daniel Lezcano

clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error

2022-12-02T11:48:28Z

The TVAL register is 32 bit signed. Thus only the lower 31 bits are available to specify when an interrupt is to occur at some time in the near future. Attempting to specify a larger interval with TVAL results in a negative time delta which means the timer fires immediately upon being programmed, rather than firing at that expected future time. The solution is for Linux to declare that TVAL is a 31 bit register rather than give its true size of 32 bits. This prevents Linux from programming TVAL with a too-large value. Note that, prior to 5.16, this little trick was the standard way to handle TVAL in Linux, so there is nothing new happening here on that front. The softlockup detector hides the issue, because it keeps generating short timer deadlines that are within the scope of the broken timer. Disable it, and you start using NO_HZ with much longer timer deadlines, which turns into an interrupt flood: 11: 1124855130 949168462 758009394 76417474 104782230 30210281 310890 1734323687 GICv2 29 Level arch_timer And "much longer" isn't that long: it takes less than 43s to underflow TVAL at 50MHz (the frequency of the counter on XGene-1). Some comments on the v1 version of this patch by Marc Zyngier: XGene implements CVAL (a 64bit comparator) in terms of TVAL (a countdown register) instead of the other way around. TVAL being a 32bit register, the width of the counter should equally be 32. However, TVAL is a *signed* value, and keeps counting down in the negative range once the timer fires. It means that any TVAL value with bit 31 set will fire immediately, as it cannot be distinguished from an already expired timer. Reducing the timer range back to a paltry 31 bits papers over the issue. Another problem cannot be fixed though, which is that the timer interrupt *must* be handled within the negative countdown period, or the interrupt will be lost (TVAL will rollover to a positive value, indicative of a new timer deadline). Cc: stable@vger.kernel.org # 5.16+ Fixes: 012f18850452 ("clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations") Signed-off-by: Joe Korty Reviewed-by: Marc Zyngier [maz: revamped the commit message] Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20221024165422.GA51107@zipoli.concurrent-rt.com Link: https://lore.kernel.org/r/20221121145343.896018-1-maz@kernel.org Signed-off-by: Daniel Lezcano