kernel/drivers/clk/tegra/clk-divider.c, branch linux-6.9.y

clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation

2020-01-10T14:50:05Z

UART clock is divided using divisor values from DLM/DLL registers when enable-bit is unset in clk register and clk's divider configuration isn't taken onto account in this case. This doesn't cause any problems, but let's add a check for the divider's enable-bit state, for consistency. Acked-by: Peter De Schrijver Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra: divider: Save and restore divider rate

2019-11-11T13:53:01Z

This patch implements context restore for clock divider. During system suspend, core power goes off and looses the settings of the Tegra CAR controller registers. So on resume, clock dividers are restored back for normal operation. Acked-by: Thierry Reding Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

2019-05-30T18:29:52Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Steve Winslow Reviewed-by: Richard Fontana Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman

clk: tegra: divider: Mark Memory Controller clock as read-only

2019-04-25T20:54:23Z

The Memory Controller (MC) clock rate can't be simply changed and nothing in kernel need to change the rate, hence let's make the clock read-only. This id also needed for the EMC driver because timing configuration may require the MC clock diver to be disabled, that is handled by the EMC clock / EMC driver integration and CLK framework shall not touch the MC divider configuration on the EMC clock rate change. Signed-off-by: Dmitry Osipenko Signed-off-by: Stephen Boyd

Merge branches 'clk-imx6-ocram', 'clk-missing-put', 'clk-tegra-sdmmc-jitter', 'clk-allwinner' and 'clk-uniphier' into clk-next

2018-08-15T05:58:53Z

* clk-imx6-ocram: : - i.MX6SX ocram_s clk support clk: imx: add ocram_s clock for i.mx6sx * clk-missing-put: : - Add missing of_node_put()s in some i.MX clk drivers clk: imx6sll: fix missing of_node_put() clk: imx6ul: fix missing of_node_put() * clk-tegra-sdmmc-jitter: : - Tegra SDMMC clk jitter improvements with high speed signaling modes clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks clk: tegra: Add sdmmc mux divider clock clk: tegra: Refactor fractional divider calculation clk: tegra: Fix includes required by fence_udelay() * clk-allwinner: clk: sunxi-ng: add A64 compatible string dt-bindings: add compatible string for the A64 DE2 CCU clk: sunxi-ng: r40: Export video PLLs clk: sunxi-ng: r40: Allow setting parent rate to display related clocks clk: sunxi-ng: r40: Add minimal rate for video PLLs * clk-uniphier: : - Uniphier NAND, USB3 PHY, and SPI clk support clk: uniphier: add clock frequency support for SPI clk: uniphier: add more USB3 PHY clocks clk: uniphier: add NAND 200MHz clock

clk: tegra: Refactor fractional divider calculation

2018-07-25T20:43:34Z

Move this to a separate file so it can be used to calculate the sdmmc clock dividers. Signed-off-by: Peter De-Schrijver Signed-off-by: Aapo Vienamo Acked-by: Peter De Schrijver Acked-by: Jon Hunter Signed-off-by: Stephen Boyd

clk: tegra: Mark Memory Controller clock as critical

2018-07-09T00:08:31Z

Memory Controller should be always-on. Currently the sibling EMC clock is marked as critical, let's mark MC clock too for consistency. Signed-off-by: Dmitry Osipenko Acked-By: Peter De Schrijver Signed-off-by: Stephen Boyd

tegra/clk-divider: fix wrong do_div() usage

2015-11-16T17:37:55Z

do_div() is meant to be used with an unsigned dividend. Signed-off-by: Nicolas Pitre

clk: tegra: Properly include clk.h

2015-07-20T18:11:17Z

Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Only include clk.h in files that are using it. Also add in a clkdev.h include that was missing in a file using clkdev APIs. Cc: Peter De Schrijver Cc: Thierry Reding Signed-off-by: Stephen Boyd

clk: tegra: Implement memory-controller clock

2014-11-26T08:43:23Z

The memory controller clock runs either at half or the same frequency as the EMC clock. Reviewed-By: Tomeu Vizoso Acked-by: Mike Turquette Signed-off-by: Thierry Reding