kernel/drivers/clk/qcom, branch linux-5.1.y

Merge branches 'clk-ingenic', 'clk-mtk-mux', 'clk-qcom-sdm845-pcie', 'clk-mtk-crit' and 'clk-mtk' into clk-next

2019-03-08T18:29:30Z

* clk-ingenic: clk: ingenic: Remove set but not used variable 'enable' clk: ingenic: Fix doc of ingenic_cgu_div_info clk: ingenic: Fix round_rate misbehaving with non-integer dividers clk: ingenic: jz4740: Fix gating of UDC clock * clk-mtk-mux: clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel clk: mediatek: add MUX_GATE_FLAGS_2 * clk-qcom-sdm845-pcie: clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks * clk-mtk-crit: clk: mediatek: Mark bus and DRAM related clocks as critical clk: mediatek: Add flags to mtk_gate clk: mediatek: Add MUX_FLAGS macro * clk-mtk: clk: mediatek: correct cpu clock name for MT8173 SoC

Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and 'clk-SA-fixes' into clk-next

2019-03-08T18:29:15Z

- Updates for qcom MSM8998 GCC clks - qcom MSM8998 RPM managed clks - Random static analysis fixes for clk drivers * clk-qcom-msm8998: clk: qcom: Make common clk_hw registrations clk: qcom: smd: Add support for MSM8998 rpm clocks clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998 clk: qcom: Add missing freq for usb30_master_clk on 8998 clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks * clk-fractional-parent: clk: fractional-divider: check parent rate only if flag is set * clk-x86-mv: clk: x86: Move clk-lpss.h to platform_data/x86 * clk-SA-fixes: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings clk: qoriq: Improve an error message

Merge branches 'clk-qcom-rpmh', 'clk-gpio-sleep', 'clk-stm32mp1', 'clk-qcom-qcs404' and 'clk-actions-s500' into clk-next

2019-03-08T18:27:52Z

- IPA clk support on Qualcomm RPMh clk controllers - Support sleeping gpios in clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Actions Semi S500 SoC clk support * clk-qcom-rpmh: clk: qcom: clk-rpmh: Add IPA clock support * clk-gpio-sleep: clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk * clk-stm32mp1: dt-bindings: clock: remove unused definition for stm32mp1 clk: stm32mp1: fix bit width of hse_rtc divider clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag clk: stm32mp1: fix HSI divider flag clk: stm32mp1: fix mcu divider table clk: stm32mp1: set ck_csi as critical clock clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks clk: stm32mp1: parent clocks update * clk-qcom-qcs404: clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs clk: qcom: remove empty lines in clk-rcg.h * clk-actions-s500: clk: actions: Add clock driver for S500 SoC dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU clk: actions: Add configurable PLL delay

clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks

2019-02-26T17:41:52Z

The PCIe PIPE clock in the GCC is fed by the PIPE clock coming from the PHY, describe this relationship. Signed-off-by: Bjorn Andersson Signed-off-by: Stephen Boyd

clk: qcom: Make common clk_hw registrations

2019-02-22T08:06:57Z

Several clock controller drivers define a list of clk_hw devices, and then register those devices in probe() before using common code to process the rest of initialization. Extend the common code to accept a list of clk_hw devices to process, thus eliminating many duplicate implementations. Signed-off-by: Jeffrey Hugo Suggested-by: Stephen Boyd Reviewed-by: Vinod Koul Tested-by: Vinod Koul Signed-off-by: Stephen Boyd

clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock

2019-02-21T22:18:13Z

The CFG/M/N/D registers are at an offset of 0x20 from the CMD register only for blsp1_uart3 clock, so add it for uart3 only. Signed-off-by: Taniya Das Signed-off-by: Anu Ramanathan Signed-off-by: Shawn Guo Signed-off-by: Vinod Koul Signed-off-by: Stephen Boyd

clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs

2019-02-21T22:18:12Z

The RCG CFG/M/N/D register base could be at a different offset than the CMD register, so introduce a cfg_offset to identify the offset with respect to the CMD RCGR register. Signed-off-by: Taniya Das Signed-off-by: Anu Ramanathan Signed-off-by: Shawn Guo Signed-off-by: Vinod Koul Signed-off-by: Stephen Boyd

clk: qcom: remove empty lines in clk-rcg.h

2019-02-21T22:18:11Z

Remove the redundant empty lines crept in. Signed-off-by: Vinod Koul Signed-off-by: Stephen Boyd

clk: qcom: clk-rpmh: Add IPA clock support

2019-02-21T21:57:55Z

The clk-rpmh driver only supports on and off RPMh clock resources. Let's extend the driver by adding support for clocks that are managed by a different type of RPMh resource known as Bus Clock Manager(BCM). The BCM is a configurable shared resource aggregator that scales performance based on a set of frequency points. The Qualcomm IP Accelerator (IPA) clock is an example of a resource that is managed by the BCM and this a requirement from the IPA driver in order to scale its core clock. Signed-off-by: David Dai Signed-off-by: Stephen Boyd

clk: qcom: gcc: Use active only source for CPUSS clocks

2019-01-24T19:41:48Z

The clocks of the CPUSS such as "gcc_cpuss_ahb_clk_src" is a CRITICAL clock and needs to vote on the active only source of XO, so as to keep the vote as long as CPUSS is active. Similar rbcpr_clk_src is also has the same requirement. Signed-off-by: Taniya Das Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845") Signed-off-by: Stephen Boyd