kernel/drivers/clk/Makefile, branch linux-6.9.y

clk: stm32mp1: move stm32mp1 clock driver into stm32 directory

2023-12-17T23:33:26Z

Move all STM32MP clock drivers into same directory (stm32). Signed-off-by: Gabriel Fernandez Link: https://lore.kernel.org/r/20231208143700.354785-2-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd

Merge branches 'clk-renesas', 'clk-kunit', 'clk-regmap' and 'clk-frac-divider' into clk-next

2023-10-30T21:12:20Z

- Make clk kunit tests work with lockdep - Fix clk gate kunit test for big-endian - Convert more than a handful of clk drivers to use regmap maple tree - Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk implementation * clk-renesas: (23 commits) clk: renesas: r9a08g045: Add clock and reset support for SDHI1 and SDHI2 clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R() clk: renesas: Add minimal boot support for RZ/G3S SoC clk: renesas: rzg2l: Add divider clock for RZ/G3S clk: renesas: rzg2l: Refactor SD mux driver clk: renesas: rzg2l: Remove CPG_SDHI_DSEL from generic header clk: renesas: rzg2l: Add struct clk_hw_data clk: renesas: rzg2l: Add support for RZ/G3S PLL clk: renesas: rzg2l: Remove critical area clk: renesas: rzg2l: Fix computation formula clk: renesas: rzg2l: Trust value returned by hardware clk: renesas: rzg2l: Lock around writes to mux register clk: renesas: rzg2l: Wait for status bit of SD mux before continuing clk: renesas: rcar-gen3: Extend SDnH divider table dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC clk: renesas: r8a7795: Constify r8a7795_*_clks clk: renesas: r9a06g032: Name anonymous structs clk: renesas: r9a06g032: Fix kerneldoc warning clk: renesas: rzg2l: Use u32 for flag and mux_flags clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields ... * clk-kunit: clk: Fix clk gate kunit test on big-endian CPUs clk: Parameterize clk_leaf_mux_set_rate_parent clk: Drive clk_leaf_mux_set_rate_parent test from clk_ops * clk-regmap: clk: versaclock7: Convert to use maple tree register cache clk: versaclock5: Convert to use maple tree register cache clk: versaclock3: Convert to use maple tree register cache clk: versaclock3: Remove redundant _is_writeable() clk: si570: Convert to use maple tree register cache clk: si544: Convert to use maple tree register cache clk: si5351: Convert to use maple tree register cache clk: si5341: Convert to use maple tree register cache clk: si514: Convert to use maple tree register cache clk: cdce925: Convert to use maple tree register cache * clk-frac-divider: clk: fractional-divider: tests: Add test suite for edge cases clk: fractional-divider: Improve approximation when zero based and export

clk: twl: add clock driver for TWL6032

2023-10-19T23:40:15Z

The TWL6032 has some clock outputs which are controlled like fixed-voltage regulators, in some drivers for these chips found in the wild, just the regulator api is abused for controlling them, so simply use something similar to the regulator functions. Due to a lack of hardware available for testing, leave out the TWL6030-specific part of those functions. Signed-off-by: Andreas Kemnade Link: https://lore.kernel.org/r/20230916100515.1650336-5-andreas@kemnade.info Signed-off-by: Stephen Boyd

clk: fractional-divider: tests: Add test suite for edge cases

2023-10-12T22:05:00Z

In light of the recent discovery that the fractional divisor approximation does not utilize the full available range for clocks that are flagged CLK_FRAC_DIVIDER_ZERO_BASED [1], implement tests for the edge cases of this clock type. Signed-off-by: Frank Oltmanns Link: https://lore.kernel.org/lkml/20230529133433.56215-1-frank@oltmanns.dev [1] Link: https://lore.kernel.org/r/20230617131041.18313-3-frank@oltmanns.dev [sboyd@kernel.org: Rename suite and tests slightly, drop unused includes, store parent rate to compare instead of repeating equation] Signed-off-by: Stephen Boyd

Merge branches 'clk-versa', 'clk-strdup', 'clk-amlogic', 'clk-allwinner' and 'clk-rockchip' into clk-next

2023-08-30T21:38:19Z

- Add Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK - Introduce kstrdup_and_replace() and use it * clk-versa: clk: vc7: Use i2c_get_match_data() instead of device_get_match_data() clk: vc5: Use i2c_get_match_data() instead of device_get_match_data() clk: versaclock3: Switch to use i2c_driver's probe callback clk: Add support for versa3 clock driver dt-bindings: clock: Add Renesas versa3 clock generator bindings * clk-strdup: clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace() clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace() driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace() lib/string_helpers: Add kstrdup_and_replace() helper * clk-amlogic: (22 commits) dt-bindings: soc: amlogic: document System Control registers dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema clk: meson: axg-audio: move bindings include to main driver clk: meson: meson8b: move bindings include to main driver clk: meson: a1: move bindings include to main driver clk: meson: eeclk: move bindings include to main driver clk: meson: aoclk: move bindings include to main driver dt-bindings: clk: axg-audio-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids dt-bindings: clk: meson8b-clkc: expose all clock ids dt-bindings: clk: g12a-aoclkc: expose all clock ids dt-bindings: clk: g12a-clks: expose all clock ids dt-bindings: clk: axg-clkc: expose all clock ids dt-bindings: clk: gxbb-clkc: expose all clock ids clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS ... * clk-allwinner: clk: sunxi-ng: nkm: Prefer current parent rate clk: sunxi-ng: a64: select closest rate for pll-video0 clk: sunxi-ng: div: Support finding closest rate clk: sunxi-ng: mux: Support finding closest rate clk: sunxi-ng: nkm: Support finding closest rate clk: sunxi-ng: nm: Support finding closest rate clk: sunxi-ng: Add helper function to find closest rate clk: sunxi-ng: Add feature to find closest rate clk: sunxi-ng: a64: allow pll-mipi to set parent's rate clk: sunxi-ng: nkm: consider alternative parent rates when determining rate clk: sunxi-ng: nkm: Use correct parameter name for parent HW clk: sunxi-ng: Modify mismatched function name clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource() * clk-rockchip: clk: rockchip: rv1126: Add PD_VO clock tree clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz clk: rockchip: rk3568: Add PLL rate for 101MHz

clk: Add support for versa3 clock driver

2023-07-19T23:39:55Z

Add support for Renesas versa3 clock driver(5p35023). The clock generator provides 6 output clocks. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20230705171000.85786-3-biju.das.jz@bp.renesas.com [sboyd@kernel.org: Add newline to printk] Signed-off-by: Stephen Boyd

clk: oxnas: remove obsolete clock driver

2023-07-19T21:53:38Z

Due to lack of maintenance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 clock driver. Acked-by: Linus Walleij Acked-by: Arnd Bergmann Acked-by: Daniel Golle Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-1-fb6ab3dea87c@linaro.org Signed-off-by: Stephen Boyd

clk: nuvoton: Add clock driver for ma35d1 clock controller

2023-06-05T11:18:08Z

The clock controller generates clocks for the whole chip, including system clocks and all peripheral clocks. This driver support ma35d1 clock gating, divider, and individual PLL configuration. There are 6 PLLs in ma35d1 SoC: - CA-PLL for the two Cortex-A35 CPU clock - SYS-PLL for system bus, which comes from the companion MCU and cannot be programmed by clock controller. - DDR-PLL for DDR - EPLL for GMAC and GFX, Display, and VDEC IPs. - VPLL for video output pixel clock - APLL for SDHC, I2S audio, and other IPs. CA-PLL has only one operation mode. DDR-PLL, EPLL, VPLL, and APLL are advanced PLLs which have 3 operation modes: integer mode, fraction mode, and spread specturm mode. Signed-off-by: Jacky Huang Acked-by: Krzysztof Kozlowski Signed-off-by: Arnd Bergmann

Merge branches 'clk-starfive', 'clk-fractional' and 'clk-devmof' into clk-next

2023-04-25T18:50:49Z

- Shrink size of clk_fractional_divider a little - Convert various clk drivers to devm_of_clk_add_hw_provider() * clk-starfive: clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers clk: starfive: Avoid casting iomem pointers MAINTAINERS: generalise StarFive clk/reset entries reset: starfive: Add StarFive JH7110 reset driver clk: starfive: Add StarFive JH7110 always-on clock driver clk: starfive: Add StarFive JH7110 system clock driver reset: starfive: jh71x0: Use 32bit I/O on 32bit registers reset: starfive: Rename "jh7100" to "jh71x0" for the common code reset: starfive: Extract the common JH71X0 reset code reset: starfive: Factor out common JH71X0 reset code reset: Create subdirectory for StarFive drivers reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE clk: starfive: Rename "jh7100" to "jh71x0" for the common code clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h clk: starfive: Factor out common JH7100 and JH7110 code clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator dt-bindings: clock: Add StarFive JH7110 system clock and reset generator * clk-fractional: clk: Remove mmask and nmask fields in struct clk_fractional_divider clk: rockchip: Remove values for mmask and nmask in struct clk_fractional_divider clk: imx: Remove values for mmask and nmask in struct clk_fractional_divider clk: Compute masks for fractional_divider clk when needed. * clk-devmof: clk: uniphier: Use managed `of_clk_add_hw_provider()` clk: si5351: Use managed `of_clk_add_hw_provider()` clk: si570: Use managed `of_clk_add_hw_provider()` clk: si514: Use managed `of_clk_add_hw_provider()` clk: lmk04832: Use managed `of_clk_add_hw_provider()` clk: hsdk-pll: Use managed `of_clk_add_hw_provider()` clk: cdce706: Use managed `of_clk_add_hw_provider()` clk: axs10x: Use managed `of_clk_add_hw_provider()` clk: axm5516: Use managed `of_clk_add_hw_provider()` clk: axi-clkgen: Use managed `of_clk_add_hw_provider()`

Merge branches 'clk-mediatek', 'clk-sunplus', 'clk-loongson' and 'clk-socfpga' into clk-next

2023-04-25T18:50:08Z

- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and MT8195 SoCs - Converted most Mediatek clock drivers to struct platform_driver - MediaTek clock drivers can be built as modules - Mediatek MT8188 SoC clk drivers - Clock driver for Sunplus SP7021 SoC - Reimplement Loongson-1 clk driver with DT support - Clk driver support for Loongson-2 SoCs - Migrate socfpga clk driver to of_clk_add_hw_provider() * clk-mediatek: (84 commits) clk: mediatek: fhctl: Mark local variables static clk: mediatek: Use right match table, include mod_devicetable clk: mediatek: Add MT8188 adsp clock support clk: mediatek: Add MT8188 imp i2c wrapper clock support clk: mediatek: Add MT8188 wpesys clock support clk: mediatek: Add MT8188 vppsys1 clock support clk: mediatek: Add MT8188 vppsys0 clock support clk: mediatek: Add MT8188 vencsys clock support clk: mediatek: Add MT8188 vdosys1 clock support clk: mediatek: Add MT8188 vdosys0 clock support clk: mediatek: Add MT8188 vdecsys clock support clk: mediatek: Add MT8188 mfgcfg clock support clk: mediatek: Add MT8188 ipesys clock support clk: mediatek: Add MT8188 imgsys clock support clk: mediatek: Add MT8188 ccusys clock support clk: mediatek: Add MT8188 camsys clock support clk: mediatek: Add MT8188 infrastructure clock support clk: mediatek: Add MT8188 peripheral clock support clk: mediatek: Add MT8188 topckgen clock support clk: mediatek: Add MT8188 apmixedsys clock support ... * clk-sunplus: clk: Add Sunplus SP7021 clock driver * clk-loongson: clk: clk-loongson2: add clock controller driver support dt-bindings: clock: add loongson-2 boot clock index MAINTAINERS: remove obsolete file entry in MIPS/LOONGSON1 ARCHITECTURE MIPS: loongson32: Update the clock initialization clk: loongson1: Re-implement the clock driver clk: loongson1: Remove the outdated driver dt-bindings: clock: Add Loongson-1 clock * clk-socfpga: clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling clk: socfpga: use of_clk_add_hw_provider and improve error handling