kernel/drivers/char/hw_random, branch linux-6.9.y

hwrng: stm32 - repair clock handling

2024-05-30T07:44:09Z

[ Upstream commit c819d7b836c5dfca0854d3e56664293601f2176d ] The clock management in this driver does not seem to be correct. The struct hwrng .init callback enables the clock, but there is no matching .cleanup callback to disable the clock. The clock get disabled as some later point by runtime PM suspend callback. Furthermore, both runtime PM and sleep suspend callbacks access registers first and disable clock which are used for register access second. If the IP is already in RPM suspend and the system enters sleep state, the sleep callback will attempt to access registers while the register clock are already disabled. This bug has been fixed once before already in commit 9bae54942b13 ("hwrng: stm32 - fix pm_suspend issue"), and regressed in commit ff4e46104f2e ("hwrng: stm32 - rework power management sequences") . Fix this slightly differently, disable register clock at the end of .init callback, this way the IP is disabled after .init. On every access to the IP, which really is only stm32_rng_read(), do pm_runtime_get_sync() which is already done in stm32_rng_read() to bring the IP from RPM suspend, and pm_runtime_mark_last_busy()/pm_runtime_put_sync_autosuspend() to put it back into RPM suspend. Change sleep suspend/resume callbacks to enable and disable register clock around register access, as those cannot use the RPM suspend/resume callbacks due to slightly different initialization in those sleep callbacks. This way, the register access should always be performed with clock surely enabled. Fixes: ff4e46104f2e ("hwrng: stm32 - rework power management sequences") Signed-off-by: Marek Vasut Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin

hwrng: stm32 - put IP into RPM suspend on failure

2024-05-30T07:44:08Z

[ Upstream commit da62ed5c019cc48648f37c7a07e6a56cf637a795 ] In case of an irrecoverable failure, put the IP into RPM suspend to avoid RPM imbalance. I did not trigger this case, but it seems it should be done based on reading the code. Fixes: b17bc6eb7c2b ("hwrng: stm32 - rework error handling in stm32_rng_read()") Signed-off-by: Marek Vasut Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin

hwrng: stm32 - use logical OR in conditional

2024-05-30T07:44:08Z

[ Upstream commit 31b57788a5024d3a114b28dad224a93831b90b5f ] The conditional is used to check whether err is non-zero OR whether reg variable is non-zero after clearing bits from it. This should be done using logical OR, not bitwise OR, fix it. Fixes: 6b85a7e141cb ("hwrng: stm32 - implement STM32MP13x support") Signed-off-by: Marek Vasut Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin

Merge tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2024-03-15T21:46:54Z

Pull crypto updates from Herbert Xu: "API: - Avoid unnecessary copying in scomp for trivial SG lists Algorithms: - Optimise NEON CCM implementation on ARM64 Drivers: - Add queue stop/query debugfs support in hisilicon/qm - Intel qat updates and cleanups" * tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits) Revert "crypto: remove CONFIG_CRYPTO_STATS" crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem crypto: tcrypt - add ffdhe2048(dh) test crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags hwrng: hisi - use dev_err_probe MAINTAINERS: Remove T Ambarus from few mchp entries crypto: iaa - Fix comp/decomp delay statistics crypto: iaa - Fix async_disable descriptor leak dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG dt-bindings: crypto: add sam9x7 in Atmel TDES dt-bindings: crypto: add sam9x7 in Atmel SHA dt-bindings: crypto: add sam9x7 in Atmel AES crypto: remove CONFIG_CRYPTO_STATS crypto: dh - Make public key test FIPS-only crypto: rockchip - fix to check return value crypto: jitter - fix CRYPTO_JITTERENTROPY help text crypto: qat - make ring to service map common for QAT GEN4 crypto: qat - fix ring to service map for dcc in 420xx crypto: qat - fix ring to service map for dcc in 4xxx ...

hwrng: hisi - use dev_err_probe

2024-03-08T11:23:24Z

Replace dev_err + return with dev_err_probe. Signed-off-by: Martin Kaiser Reviewed-by: Jonathan Cameron Signed-off-by: Herbert Xu

Normalise "name (ad@dr)" MODULE_AUTHORs to "name "

2024-03-06T21:07:39Z

Found with git grep 'MODULE_AUTHOR(".*([^)]*@' Fixed with sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ "/;s/)and/> and/}' \ $(git grep -l 'MODULE_AUTHOR(".*([^)]*@') Also: in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc"; this is what every other MODULE_AUTHOR for this company says, and it's what the header says in drivers/sbus/char/openprom.c normalise a double-spaced separator; this is clearly copied from the copyright header, where the names are aligned on consecutive lines thusly: * Linux/SPARC PROM Configuration Driver * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu) * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) but the authorship branding is single-line Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz Signed-off-by: Ahelenia Ziemiańska Cc: Joe Perches Signed-off-by: Andrew Morton

hwrng: starfive - Add runtime pm ops

2023-12-22T04:30:19Z

Define SET_RUNTIME_PM_OPS for StarFive TRNG driver. Signed-off-by: Jia Jie Ho Signed-off-by: Herbert Xu

hwrng: xgene - Convert to platform remove callback returning void

2023-12-15T09:52:54Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Signed-off-by: Herbert Xu

hwrng: timeriomem - Convert to platform remove callback returning void

2023-12-15T09:52:54Z

hwrng: stm32 - Convert to platform remove callback returning void

2023-12-15T09:52:54Z