kernel/drivers/bluetooth, branch linux-4.15.y

Bluetooth: hci_bcm: Treat Interrupt ACPI resources as always being active-low

2018-04-19T06:55:12Z

commit bb5208b314c5127b716b2ee4f55803a8bb73b750 upstream. Older devices with a serdev attached bcm bt hci, use an Interrupt ACPI resource to describe the IRQ (rather then a GpioInt resource). These device seem to all claim the IRQ is active-high and seem to all need a DMI quirk to treat it as active-low. Instead simply always assume that Interrupt resource specified IRQs are always active-low. This fixes the bt device not being able to wake the host from runtime- suspend on the: Asus T100TAM, Asus T200TA, Lenovo Yoga2 and the Toshiba Encore, without the need to add 4 new DMI quirks for these models. This also allows us to remove 2 DMI quirks for the Asus T100TA and Asus T100CHI series. Likely the 2 remaining quirks can also be removed but I could not find a DSDT of these devices to verify this. Cc: stable@vger.kernel.org Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198953 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1554835 Signed-off-by: Hans de Goede Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_bcm: Make shutdown and device wake GPIO optional

2018-04-12T10:31:11Z

commit ab2f336cb7e629de74d8af06bcaf6b15e4230e19 upstream. According to the devicetree binding the shutdown and device wake GPIOs are optional. Since commit 3e81a4ca51a1 ("Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO") this driver won't probe anymore on Raspberry Pi 3 and Zero W (no device wake GPIO connected). So fix this regression by reverting this commit partially. Fixes: 3e81a4ca51a1 ("Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO") Signed-off-by: Stefan Wahren Reviewed-by: Lukas Wunner Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_bcm: Validate IRQ before using it

2018-04-12T10:31:11Z

[ Upstream commit 4a59f1fab91e9445e34c69d8e4401a0d6bdbe914 ] The ->close, ->suspend and ->resume hooks assume presence of a valid IRQ if the device is wakeup capable. However it's entirely possible that wakeup was enabled by some other entity besides this driver and in this case the user will get a WARN splat if no valid IRQ was found. Avoid by checking if the IRQ is valid, i.e. > 0. Case in point: On recent MacBook Pros, the Bluetooth device lacks an IRQ (because host wakeup is handled by the SMC, independently of the operating system), but it does possess a _PRW method (which specifies the SMC's GPE as wake event). The ACPI core therefore automatically marks the physical Bluetooth device wakeup capable upon binding it to its ACPI companion: device_set_wakeup_capable+0x96/0xb0 acpi_bind_one+0x28a/0x310 acpi_platform_notify+0x20/0xa0 device_add+0x215/0x690 serdev_device_add+0x57/0xf0 acpi_serdev_add_device+0xc9/0x110 acpi_ns_walk_namespace+0x131/0x280 acpi_walk_namespace+0xf5/0x13d serdev_controller_add+0x6f/0x110 serdev_tty_port_register+0x98/0xf0 tty_port_register_device_attr_serdev+0x3a/0x70 uart_add_one_port+0x268/0x500 serial8250_register_8250_port+0x32e/0x490 dw8250_probe+0x46c/0x720 platform_drv_probe+0x35/0x90 driver_probe_device+0x300/0x450 bus_for_each_drv+0x67/0xb0 __device_attach+0xde/0x160 bus_probe_device+0x9c/0xb0 device_add+0x448/0x690 platform_device_add+0x10e/0x260 mfd_add_device+0x392/0x4c0 mfd_add_devices+0xb1/0x110 intel_lpss_probe+0x2a9/0x610 [intel_lpss] intel_lpss_pci_probe+0x7a/0xa8 [intel_lpss_pci] Reviewed-by: Andy Shevchenko Signed-off-by: Ronald Tschalär [lukas: fix up ->suspend and ->resume as well, add commit message] Signed-off-by: Lukas Wunner Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO

2018-04-12T10:31:11Z

[ Upstream commit 3e81a4ca51a1172253078ca7abd6a91040b8fcf4 ] Commit 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices") amended this driver to request a shutdown and device wake GPIO on probe, but mandated that only one of them need to be present: /* Make sure at-least one of the GPIO is defined and that * a name is specified for this instance */ if ((!dev->device_wakeup && !dev->shutdown) || !dev->name) { dev_err(&pdev->dev, "invalid platform data\n"); return -EINVAL; } However the same commit added a call to bcm_gpio_set_power() to the ->probe hook, which unconditionally accesses *both* GPIOs. Luckily, the resulting NULL pointer deref was never reported, suggesting there's no machine where either GPIO is missing. Commit 8a92056837fd ("Bluetooth: hci_bcm: Add (runtime)pm support to the serdev driver") removed the check whether at least one of the GPIOs is present without specifying a reason. Because commit 62aaefa7d038 ("Bluetooth: hci_bcm: improve use of gpios API") refactored the driver to use devm_gpiod_get_optional() instead of devm_gpiod_get(), one is now tempted to believe that the driver doesn't require *any* of the two GPIOs. Which is wrong, the driver still requires both GPIOs to avoid a NULL pointer deref. To this end, establish the status quo ante and request the GPIOs with devm_gpiod_get() again. Bail out of ->probe if either of them is missing. Oddly enough, whereas bcm_gpio_set_power() accesses the device wake pin unconditionally, bcm_suspend_device() and bcm_resume_device() do check for its presence before accessing it. Those checks are superfluous, so remove them. Cc: Frédéric Danis Cc: Loic Poulain Cc: Hans de Goede Cc: Uwe Kleine-König Cc: Linus Walleij Reviewed-by: Andy Shevchenko Signed-off-by: Lukas Wunner Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: Add a new 04ca:3015 QCA_ROME device

2018-04-12T10:31:01Z

[ Upstream commit 0a03f98b98c201191e3ba15a0e33f46d8660e1fd ] This patch adds the 04ca:3015 (from a QCA9377 board) Bluetooth device to the btusb blacklist and makes the kernel use the btqca module instead of btusb. The patch is necessary because, without it the 04ca:3015 device defaults to using the btusb driver, which makes the WIFI side of the QCA9377 board unusable (obtains 0 MBps in speedtest, when the 04ca:3015 bluetooth is used with an audio headset). /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3015 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Ioan Moldovan Signed-off-by: Johan Hedberg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174

2018-03-28T16:22:56Z

commit f44cb4b19ed40b655c2d422c9021ab2c2625adb6 upstream. The Atheros 1525/QCA6174 BT doesn't seem working properly on the recent kernels, as it tries to load a wrong firmware ar3k/AthrBT_0x00000200.dfu and it fails. This seems to have been a problem for some time, and the known workaround is to apply BTUSB_QCA_ROM quirk instead of BTUSB_ATH3012. The device in question is: T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3004 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504 Reported-by: Ivan Levshin Tested-by: Ivan Levshin Cc: Signed-off-by: Takashi Iwai Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Add Dell OptiPlex 3060 to btusb_needs_reset_resume_table

2018-03-28T16:22:56Z

commit 0c6e526646c04ce31d4aaa280ed2237dd1cd774c upstream. The issue can be reproduced before commit fd865802c66b ("Bluetooth: btusb: fix QCA Rome suspend/resume") gets introduced, so the reset resume quirk is still needed for this system. T: Bus=01 Lev=01 Prnt=01 Port=13 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e007 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Cc: stable@vger.kernel.org Cc: Brian Norris Cc: Hans de Goede Signed-off-by: Kai-Heng Feng Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Remove Yoga 920 from the btusb_needs_reset_resume_table

2018-03-28T16:22:56Z

commit f0e8c61110c2c85903b136ba070daf643a8b6842 upstream. Commit 1fdb92697469 ("Bluetooth: btusb: Use DMI matching for QCA reset_resume quirking"), added the Lenovo Yoga 920 to the btusb_needs_reset_resume_table. Testing has shown that this is a false positive and the problems where caused by issues with the initial fix: commit fd865802c66b ("Bluetooth: btusb: fix QCA Rome suspend/resume"), which has already been reverted. So the QCA Rome BT in the Yoga 920 does not need a reset-resume quirk at all and this commit removes it from the btusb_needs_reset_resume_table. Note that after this commit the btusb_needs_reset_resume_table is now empty. It is kept around on purpose, since this whole series of commits started for a reason and there are actually broken platforms around, which need to be added to it. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 1fdb92697469 ("Bluetooth: btusb: Use DMI matching for QCA ...") Cc: stable@vger.kernel.org Cc: Brian Norris Cc: Kai-Heng Feng Tested-by: Kevin Fenzi Suggested-by: Brian Norris Signed-off-by: Hans de Goede Reviewed-by: Brian Norris Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: btqcomsmd: Fix skb double free corruption

2018-03-24T10:02:44Z

[ Upstream commit 67b8fbead4685b36d290a0ef91c6ddffc4920ec9 ] In case of hci send frame failure, skb is still owned by the caller (hci_core) and then should not be freed. This fixes crash on dragonboard-410c when sending SCO packet. skb is freed by both btqcomsmd and hci_core. Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_qca: Avoid setup failure on missing rampatch

2018-03-24T10:02:44Z

[ Upstream commit ba8f3597900291a93604643017fff66a14546015 ] Assuming that the original code idea was to enable in-band sleeping only if the setup_rome method returns succes and run in 'standard' mode otherwise, we should not return setup_rome return value which makes qca_setup fail if no rampatch/nvm file found. This fixes BT issue on the dragonboard-820C p4 which includes the following QCA controller: hci0: Product:0x00000008 hci0: Patch :0x00000111 hci0: ROM :0x00000302 hci0: SOC :0x00000044 Since there is no rampatch for this controller revision, just make it work as is. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman