kernel/drivers/bluetooth/hci_intel.c, branch linux-4.16.y

Bluetooth: btintel: Create common function for firmware download

2018-01-25T08:28:40Z

The firmware download flow for RAM SKU is same for both USB and UART and this patch creates a common function for both driver. Signed-off-by: Tedd Ho-Jeong An Signed-off-by: Marcel Holtmann

Bluetooth: btintel: Create common Intel Read Boot Params function

2018-01-24T18:31:49Z

The Intel_Read_Boot_Params command is used to read boot parameters from the bootloader and this is Intel generic command used in USB and UART drivers. Signed-off-by: Tedd Ho-Jeong An Signed-off-by: Marcel Holtmann

Bluetooth: btintel: Use boot parameter from firmware file

2018-01-24T18:31:49Z

Each RAM SKU has a different boot parameter which is used in HCI_Intel_Reset command after downloading the firmware. The boot parameter is embedded in the firmware data and to support multiple SKUs, driver reads the boot parameter while downloading the firmware instead of using static values per SKU. Signed-off-by: Tedd Ho-Jeong An Signed-off-by: Marcel Holtmann

Bluetooth: btintel: Create common function for Intel Reset

2018-01-24T18:31:49Z

The Intel_Reset command is used to reset the device after downloading the firmware and this is Intel generic command used in both USB and UART. Signed-off-by: Tedd Ho-Jeong An Signed-off-by: Marcel Holtmann

Bluetooth: hci_intel: Update firmware filename for Intel 9x60 and later

2018-01-24T18:31:49Z

The format of Intel Bluetooth firmware for bootloader product is ibt--.sfi and .ddc. But for the 9x60 SKU, there are three variants of FW, which cannot be differenticate just with hw_variant and device_revision_id. So, to pick the appropriate FW file for 9x60 SKU, three fields, hw_variant, hw_revision, and fw_revision, needs to be used rather than hw_variant and device_revision_id. Format will be like this: ibt---.sfi and .ddc Signed-off-by: Tedd Ho-Jeong An Signed-off-by: Marcel Holtmann

networking: add and use skb_put_u8()

2017-06-16T15:48:40Z

Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by: Joe Perches Suggested-by: Bjørn Mork Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

networking: make skb_put & friends return void pointers

2017-06-16T15:48:39Z

It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

networking: introduce and use skb_put_data()

2017-06-16T15:48:37Z

A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

Bluetooth: hci_intel: Add GPIO ACPI mapping table

2017-06-09T16:45:48Z

In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko Signed-off-by: Marcel Holtmann

Bluetooth: hci_intel: add missing tty-device sanity check

2017-04-12T20:02:39Z

Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 74cdad37cd24 ("Bluetooth: hci_intel: Add runtime PM support") Fixes: 1ab1f239bf17 ("Bluetooth: hci_intel: Add support for platform driver") Cc: stable # 4.3 Cc: Loic Poulain Signed-off-by: Johan Hovold Signed-off-by: Marcel Holtmann