kernel/drivers/bluetooth/btqcomsmd.c, branch linux-6.9.y

Bluetooth: btqcomsmd: Fix command timeout after setting BD address

2023-03-23T20:09:38Z

On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs) the Bluetooth firmware seems to become unresponsive for a while after setting the BD address. On recent kernel versions (at least 5.17+) this often causes timeouts for subsequent commands, e.g. the HCI reset sent by the Bluetooth core during initialization: Bluetooth: hci0: Opcode 0x c03 failed: -110 Unfortunately this behavior does not seem to be documented anywhere. Experimentation suggests that the minimum necessary delay to avoid the problem is ~150us. However, to be sure add a sleep for > 1ms in case it is a bit longer on other firmware versions. Older kernel versions are likely also affected, although perhaps with slightly different errors or less probability. Side effects can easily hide the issue in most cases, e.g. unrelated incoming interrupts that cause the necessary delay. Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Stephan Gerhold Signed-off-by: Luiz Augusto von Dentz

Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function

2020-12-18T21:20:21Z

Some resource should be released in the error handling path of the probe function, as already done in the remove function. The remove function was fixed in commit 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Christophe JAILLET Signed-off-by: Marcel Holtmann

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284

2019-06-05T15:36:37Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman

Bluetooth: btqcomsmd: use HCI_QUIRK_USE_BDADDR_PROPERTY

2019-02-26T09:08:26Z

Use the HCI_QUIRK_USE_BDADDR_PROPERTY quirk to let the HCI core handle the reading of 'local-bd-address'. With this there is no need to set HCI_QUIRK_INVALID_BDADDR, the case of a non-existing or invalid fwnode property is handled by the core code. Signed-off-by: Matthias Kaehlcke Reviewed-by: Balakrishna Godavarthi Signed-off-by: Marcel Holtmann

Bluetooth: btqcomsmd: Fix rx/tx stats

2018-05-18T04:37:50Z

HCI RX/TX byte counters were only incremented when sending ACL packets. To reflect the real HCI traffic, we need to increment these counters on HCI events and HCI commands as well. Increment error counter on rpmsg errors. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: btqcomsmd: Fix skb double free corruption

2017-12-12T23:28:41Z

In case of hci send frame failure, skb is still owned by the caller (hci_core) and then should not be freed. This fixes crash on dragonboard-410c when sending SCO packet. skb is freed by both btqcomsmd and hci_core. Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: btqcomsmd: retrieve BD address from DT property

2017-10-06T18:35:47Z

Retrieve BD address from the local-bd-address property. This address must be unique and is usually added in the DT by the bootloader which has access to the provisioned data. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: btqcomsmd: Add support for BD address setup

2017-10-06T18:35:47Z

This patch implements the hdev setup function since wcnss-bt does not have persistent memory to store an allocated BD address. The device is therefore marked as unconfigured if no BD address has been previously retrieved. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org

networking: introduce and use skb_put_data()

2017-06-16T15:48:37Z

A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

soc: qcom: smd: Transition client drivers from smd to rpmsg

2017-03-29T00:58:07Z

By moving these client drivers to use RPMSG instead of the direct SMD API we can reuse them ontop of the newly added GLINK wire-protocol support found in the 820 and 835 Qualcomm platforms. As the new (RPMSG-based) and old SMD implementations are mutually exclusive we have to change all client drivers in one commit, to make sure we have a working system before and after this transition. Acked-by: Andy Gross Acked-by: Kalle Valo Acked-by: Marcel Holtmann Signed-off-by: Bjorn Andersson Signed-off-by: David S. Miller