kernel/drivers/base, branch linux-4.15.y

PM / domains: Don't skip driver's ->suspend|resume_noirq() callbacks

2018-04-12T10:31:12Z

[ Upstream commit a935424bb658f9ca37eb5e94119b857998341356 ] Commit 10da65423fdb (PM / Domains: Call driver's noirq callbacks) started to respect driver's noirq callbacks, but while doing that it also introduced a few potential problems. More precisely, in genpd_finish_suspend() and genpd_resume_noirq() the noirq callbacks at the driver level should be invoked, no matter of whether dev->power.wakeup_path is set or not. Additionally, the commit in question also made genpd_resume_noirq() to ignore the return value from pm_runtime_force_resume(). Let's fix both these issues! Fixes: 10da65423fdb (PM / Domains: Call driver's noirq callbacks) Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "base: arch_topology: fix section mismatch build warnings"

2018-04-08T12:27:39Z

commit 9de9a449482677a75f1edd2049268a7efc40fc96 upstream. This reverts commit 452562abb5b7 ("base: arch_topology: fix section mismatch build warnings"). It causes the notifier call hangs in some use-cases. In some cases with using maxcpus, some of cpus are booted first and then the remaining cpus are booted. As an example, some users who want to realize fast boot up often use the following procedure. 1) Define all CPUs on device tree (CA57x4 + CA53x4) 2) Add "maxcpus=4" in bootargs 3) Kernel boot up with CA57x4 4) After kernel boot up, CA53x4 is booted from user When kernel init was finished, CPUFREQ_POLICY_NOTIFIER was not still unregisterd. This means that "__init init_cpu_capacity_callback()" will be called after kernel init sequence. To avoid this problem, it needs to remove __init{,data} annotations by reverting this commit. Also, this commit was needed to fix kernel compile issue below. However, this issue was also fixed by another patch: commit 82d8ba717ccb ("arch_topology: Fix section miss match warning due to free_raw_capacity()") in v4.15 as well. Whereas commit 452562abb5b7 added all the missing __init annotations, commit 82d8ba717ccb removed it from free_raw_capacity(). WARNING: vmlinux.o(.text+0x548f24): Section mismatch in reference from the function init_cpu_capacity_callback() to the variable .init.text:$x The function init_cpu_capacity_callback() references the variable __init $x. This is often because init_cpu_capacity_callback lacks a __init annotation or the annotation of $x is wrong. Fixes: 82d8ba717ccb ("arch_topology: Fix section miss match warning due to free_raw_capacity()") Cc: stable Signed-off-by: Gaku Inami Reviewed-by: Dietmar Eggemann Tested-by: Dietmar Eggemann Acked-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman

dma-buf/fence: Fix lock inversion within dma-fence-array

2018-03-19T08:09:49Z

[ Upstream commit 03e4e0a9e02cf703da331ff6cfd57d0be9bf5692 ] Ages ago Rob Clark noted, "Currently with fence-array, we have a potential deadlock situation. If we fence_add_callback() on an array-fence, the array-fence's lock is acquired first, and in it's ->enable_signaling() callback, it will install cbs on it's array-member fences, so the array-member's lock is acquired second. But in the signal path, the array-member's lock is acquired first, and the array-fence's lock acquired second." Rob proposed either extensive changes to dma-fence to unnest the fence-array signaling, or to defer the signaling onto a workqueue. This is a more refined version of the later, that should keep the latency of the fence signaling to a minimum by using an irq-work, which is executed asap. Reported-by: Rob Clark Suggested-by: Rob Clark References: 1476635975-21981-1-git-send-email-robdclark@gmail.com Signed-off-by: Chris Wilson Cc: Rob Clark Cc: Gustavo Padovan Cc: Sumit Semwal Cc: Christian König Reviewed-by: Christian König Signed-off-by: Sumit Semwal Link: https://patchwork.freedesktop.org/patch/msgid/20171114162719.30958-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

PM / runtime: Update links_count also if !CONFIG_SRCU

2018-02-22T14:39:59Z

commit 433986c2c265d106d6a8e88006e0131fefc92b7b upstream. Commit baa8809f6097 (PM / runtime: Optimize the use of device links) added an invocation of pm_runtime_drop_link() to __device_link_del(). However there are two variants of that function, one for CONFIG_SRCU and another for !CONFIG_SRCU, and the commit only modified the former. Fixes: baa8809f6097 (PM / runtime: Optimize the use of device links) Cc: v4.10+ # v4.10+ Signed-off-by: Lukas Wunner Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-01-14T17:51:25Z

Pull x86 pti updates from Thomas Gleixner: "This contains: - a PTI bugfix to avoid setting reserved CR3 bits when PCID is disabled. This seems to cause issues on a virtual machine at least and is incorrect according to the AMD manual. - a PTI bugfix which disables the perf BTS facility if PTI is enabled. The BTS AUX buffer is not globally visible and causes the CPU to fault when the mapping disappears on switching CR3 to user space. A full fix which restores BTS on PTI is non trivial and will be worked on. - PTI bugfixes for EFI and trusted boot which make sure that the user space visible page table entries have the NX bit cleared - removal of dead code in the PTI pagetable setup functions - add PTI documentation - add a selftest for vsyscall to verify that the kernel actually implements what it advertises. - a sysfs interface to expose vulnerability and mitigation information so there is a coherent way for users to retrieve the status. - the initial spectre_v2 mitigations, aka retpoline: + The necessary ASM thunk and compiler support + The ASM variants of retpoline and the conversion of affected ASM code + Make LFENCE serializing on AMD so it can be used as speculation trap + The RSB fill after vmexit - initial objtool support for retpoline As I said in the status mail this is the most of the set of patches which should go into 4.15 except two straight forward patches still on hold: - the retpoline add on of LFENCE which waits for ACKs - the RSB fill after context switch Both should be ready to go early next week and with that we'll have covered the major holes of spectre_v2 and go back to normality" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) x86,perf: Disable intel_bts when PTI security/Kconfig: Correct the Documentation reference for PTI x86/pti: Fix !PCID and sanitize defines selftests/x86: Add test_vsyscall x86/retpoline: Fill return stack buffer on vmexit x86/retpoline/irq32: Convert assembler indirect jumps x86/retpoline/checksum32: Convert assembler indirect jumps x86/retpoline/xen: Convert Xen hypercall indirect jumps x86/retpoline/hyperv: Convert assembler indirect jumps x86/retpoline/ftrace: Convert ftrace assembler indirect jumps x86/retpoline/entry: Convert entry assembler indirect jumps x86/retpoline/crypto: Convert crypto assembler indirect jumps x86/spectre: Add boot time option to select Spectre v2 mitigation x86/retpoline: Add initial retpoline support objtool: Allow alternatives to be ignored objtool: Detect jumps to retpoline thunks x86/pti: Make unpoison of pgd for trusted boot work for real x86/alternatives: Fix optimize_nops() checking sysfs/cpu: Fix typos in vulnerability documentation x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC ...

sysfs/cpu: Add vulnerability folder

2018-01-08T10:10:33Z

As the meltdown/spectre problem affects several CPU architectures, it makes sense to have common way to express whether a system is affected by a particular vulnerability or not. If affected the way to express the mitigation should be common as well. Create /sys/devices/system/cpu/vulnerabilities folder and files for meltdown, spectre_v1 and spectre_v2. Allow architectures to override the show function. Signed-off-by: Thomas Gleixner Reviewed-by: Greg Kroah-Hartman Reviewed-by: Konrad Rzeszutek Wilk Cc: Peter Zijlstra Cc: Will Deacon Cc: Dave Hansen Cc: Linus Torvalds Cc: Borislav Petkov Cc: David Woodhouse Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de

Merge tag 'driver-core-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2017-12-31T18:50:05Z

Pull driver core fixes from Greg KH: "Here are two driver core fixes for 4.15-rc6, resolving some reported issues. The first is a cacheinfo fix for DT based systems to resolve a reported issue that has been around for a while, and the other is to resolve a regression in the kobject uevent code that showed up in 4.15-rc1. Both have been in linux-next for a while with no reported issues" * tag 'driver-core-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kobject: fix suppressing modalias in uevents delivered over netlink drivers: base: cacheinfo: fix cache type for non-architected system cache

drivers: base: cacheinfo: fix cache type for non-architected system cache

2017-12-15T19:07:49Z

Commit dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties") doesn't initialise the cache type if it's present only in DT and the architecture is not aware of it. They are unified system level cache which are generally transparent. This patch check if the cache type is set to NOCACHE but the DT node indicates that it's unified cache and sets the cache type accordingly. Fixes: dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties") Reported-and-tested-by: Tan Xiaojun Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla Cc: stable Signed-off-by: Greg Kroah-Hartman

PM / sleep: Avoid excess pm_runtime_enable() calls in device_resume()

2017-12-11T13:32:56Z

Middle-layer code doing suspend-time optimizations for devices with the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and the ACPI PM domain) needs to make the core skip ->thaw_early and ->thaw callbacks for those devices in some cases and it sets the power.direct_complete flag for them for this purpose. However, it turns out that setting power.direct_complete outside of the PM core is a bad idea as it triggers an excess invocation of pm_runtime_enable() in device_resume(). For this reason, provide a helper to clear power.is_late_suspended and power.is_suspended to be invoked by the middle-layer code in question instead of setting power.direct_complete and make that code call the new helper. Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account) Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account) Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Acked-by: Bjorn Helgaas

Merge tag 'pm-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-12-08T17:58:10Z

Pull power management fix from Rafael Wysocki: "This fixes an issue in the device runtime PM framework that prevents customer devices from resuming if runtime PM is disabled for one or more of their supplier devices (as reflected by device links between those devices)" * tag 'pm-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / runtime: Fix handling of suppliers with disabled runtime PM