kernel/drivers/base/dma-mapping.c, branch linux-4.12.y

Merge tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2017-05-09T22:15:47Z

Pull IOMMU updates from Joerg Roedel: - code optimizations for the Intel VT-d driver - ability to switch off a previously enabled Intel IOMMU - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs - header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that - ACPI/IORT updates and fixes - Exynos IOMMU optimizations - updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches - new command-line option to set default domain type allocated by the iommu core code - another command line option to allow the Intel IOMMU switched off in a tboot environment - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) - various other small fixes and improvements * tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits) soc/qbman: Move dma-mapping.h include to qman_priv.h soc/qbman: Fix implicit header dependency now causing build fails iommu: Remove trace-events include from iommu.h iommu: Remove pci.h include from trace/events/iommu.h arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() ACPI/IORT: Fix CONFIG_IOMMU_API dependency iommu/vt-d: Don't print the failure message when booting non-kdump kernel iommu: Move report_iommu_fault() to iommu.c iommu: Include device.h in iommu.h x86, iommu/vt-d: Add an option to disable Intel IOMMU force on iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed iommu/arm-smmu: Correct sid to mask iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid() iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code omap3isp: Remove iommu_group related code iommu/omap: Add iommu-group support iommu/omap: Make use of 'struct iommu_device' iommu/omap: Store iommu_dev pointer in arch_data iommu/omap: Move data structures to omap-iommu.h iommu/omap: Drop legacy-style device support ...

drivers: acpi: Handle IOMMU lookup failure with deferred probing or error

2017-04-20T14:31:08Z

This is an equivalent to the DT's handling of the iommu master's probe with deferred probing when the corrsponding iommu is not probed yet. The lack of a registered IOMMU can be caused by the lack of a driver for the IOMMU, the IOMMU device probe not having been performed yet, having been deferred, or having failed. The first case occurs when the firmware describes the bus master and IOMMU topology correctly but no device driver exists for the IOMMU yet or the device driver has not been compiled in. Return NULL, the caller will configure the device without an IOMMU. The second and third cases are handled by deferring the probe of the bus master device which will eventually get reprobed after the IOMMU. The last case is currently handled by deferring the probe of the bus master device as well. A mechanism to either configure the bus master device without an IOMMU or to fail the bus master device probe depending on whether the IOMMU is optional or mandatory would be a good enhancement. Tested-by: Hanjun Guo Reviewed-by: Robin Murphy [Lorenzo: Added fixes for dma_coherent_mask overflow, acpi_dma_configure called multiple times for same device] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Sricharan R Signed-off-by: Joerg Roedel

iommu: of: Handle IOMMU lookup failure with deferred probing or error

2017-04-20T14:31:07Z

Failures to look up an IOMMU when parsing the DT iommus property need to be handled separately from the .of_xlate() failures to support deferred probing. The lack of a registered IOMMU can be caused by the lack of a driver for the IOMMU, the IOMMU device probe not having been performed yet, having been deferred, or having failed. The first case occurs when the device tree describes the bus master and IOMMU topology correctly but no device driver exists for the IOMMU yet or the device driver has not been compiled in. Return NULL, the caller will configure the device without an IOMMU. The second and third cases are handled by deferring the probe of the bus master device which will eventually get reprobed after the IOMMU. The last case is currently handled by deferring the probe of the bus master device as well. A mechanism to either configure the bus master device without an IOMMU or to fail the bus master device probe depending on whether the IOMMU is optional or mandatory would be a good enhancement. Tested-by: Marek Szyprowski Reviewed-by: Robin Murphy Acked-by: Rob Herring Signed-off-by: Laurent Pichart Signed-off-by: Sricharan R Signed-off-by: Joerg Roedel

of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices

2017-04-20T14:31:06Z

Configuring DMA ops at probe time will allow deferring device probe when the IOMMU isn't available yet. The dma_configure for the device is now called from the generic device_attach callback just before the bus/driver probe is called. This way, configuring the DMA ops for the device would be called at the same place for all bus_types, hence the deferred probing mechanism should work for all buses as well. pci_bus_add_devices (platform/amba)(_device_create/driver_register) | | pci_bus_add_device (device_add/driver_register) | | device_attach device_initial_probe | | __device_attach_driver __device_attach_driver | driver_probe_device | really_probe | dma_configure Similarly on the device/driver_unregister path __device_release_driver is called which inturn calls dma_deconfigure. This patch changes the dma ops configuration to probe time for both OF and ACPI based platform/amba/pci bus devices. Tested-by: Marek Szyprowski Tested-by: Hanjun Guo Reviewed-by: Robin Murphy Acked-by: Rob Herring Acked-by: Bjorn Helgaas (drivers/pci part) Acked-by: Rafael J. Wysocki Signed-off-by: Sricharan R Signed-off-by: Joerg Roedel

drivers: base: dma-mapping: use nth_page helper

2017-04-08T16:26:18Z

Use nth_page() helper instead of page_to_pfn() and pfn_to_page() to simplify the code. Signed-off-by: Geliang Tang Signed-off-by: Greg Kroah-Hartman

drivers: base: dma-mapping: Fix typo in dmam_alloc_non_coherent comments

2016-11-30T12:04:53Z

The function we are wrapping is named dma_alloc_noncoherent, and not dma_alloc_non_coherent. Fixes: 9ac7849e35f70 ("devres: device resource management") Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman

drivers/base dmam_declare_coherent_memory leaks

2016-08-31T13:19:55Z

dmam_declare_coherent_memory doesn't take into account the return value of dma_declare_coherent_memory, which leads to incorrect resource handling Signed-off-by: Vyacheslav V. Yurkov Signed-off-by: Greg Kroah-Hartman

dma-mapping: use vma_pages().

2016-08-31T13:13:56Z

Replace explicit computation of vma page count by a call to vma_pages() Signed-off-by: Muhammad Falak R Wani Signed-off-by: Greg Kroah-Hartman

drivers: base: dma-mapping: page align the size when unmap_kernel_range

2016-08-31T13:13:56Z

When dma_common_free_remap, the input parameter 'size' may not be page aligned. And, met kernel warning when doing iommu dma for usb on i.MX8 platform: " WARNING: CPU: 0 PID: 869 at mm/vmalloc.c:70 vunmap_page_range+0x1cc/0x1d0() Modules linked in: CPU: 0 PID: 869 Comm: kworker/u8:2 Not tainted 4.1.12-00444-gc5f9d1d-dirty #147 Hardware name: Freescale i.MX8DV Sabreauto (DT) Workqueue: ci_otg ci_otg_work Call trace: [] dump_backtrace+0x0/0x124 [] show_stack+0x10/0x1c [] dump_stack+0x84/0xc8 [] warn_slowpath_common+0x98/0xd0 [] warn_slowpath_null+0x14/0x20 [] vunmap_page_range+0x1c8/0x1d0 [] unmap_kernel_range+0x20/0x88 [] dma_common_free_remap+0x74/0x84 [] __iommu_free_attrs+0x9c/0x178 [] ehci_mem_cleanup+0x140/0x194 [] ehci_stop+0x8c/0xdc [] usb_remove_hcd+0xf0/0x1cc [] host_stop+0x1c/0x58 [] ci_otg_work+0xdc/0x120 [] process_one_work+0x134/0x33c [] worker_thread+0x13c/0x47c [] kthread+0xd8/0xf0 " For dma_common_pages_remap: dma_common_pages_remap |->get_vm_area_caller |->__get_vm_area_node |->size = PAGE_ALIGN(size); Round up to page aligned So, in dma_common_free_remap, we also need a page aligned size, pass 'PAGE_ALIGN(size)' to unmap_kernel_range. Signed-off-by: Peng Fan Cc: Greg Kroah-Hartman Cc: Signed-off-by: Greg Kroah-Hartman

dma-mapping: remove

2016-01-21T01:09:18Z

This wasn't an asm-generic header to start with, and can be merged into dma-mapping.h trivially. Signed-off-by: Christoph Hellwig Cc: "David S. Miller" Cc: Aurelien Jacquiot Cc: Chris Metcalf Cc: David Howells Cc: Geert Uytterhoeven Cc: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Helge Deller Cc: James Hogan Cc: Jesper Nilsson Cc: Koichi Yasutake Cc: Ley Foon Tan Cc: Mark Salter Cc: Mikael Starvik Cc: Steven Miao Cc: Vineet Gupta Cc: Christian Borntraeger Cc: Joerg Roedel Cc: Sebastian Ott Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds