kernel/drivers/acpi/scan.c, branch linux-6.9.y

ACPI: scan: Do not increase dep_unmet for already met dependencies

2024-04-08T14:44:14Z

On the Toshiba Encore WT10-A tablet the BATC battery ACPI device depends on 3 other devices: Name (_DEP, Package (0x03) // _DEP: Dependencies { I2C1, GPO2, GPO0 }) acpi_scan_check_dep() adds all 3 of these to the acpi_dep_list and then before an acpi_device is created for the BATC handle (and thus before acpi_scan_dep_init() runs) acpi_scan_clear_dep() gets called for both GPIO depenencies, with free_when_met not set for the dependencies. Since there is no adev for BATC yet, there also is no dep_unmet to decrement. The only result of acpi_scan_clear_dep() in this case is dep->met getting set. Soon after acpi_scan_clear_dep() has been called for the GPIO dependencies the acpi_device gets created for the BATC handle and acpi_scan_dep_init() runs, this sees 3 dependencies on the acpi_dep_list and initializes unmet_dep to 3. Later when the dependency for I2C1 is met unmet_dep becomes 2, but since the 2 GPIO deps where already met it never becomes 0 causing battery monitoring to not work. Fix this by modifying acpi_scan_dep_init() to not increase dep_met for dependencies which have already been marked as being met. Fixes: 3ba12d8de3fa ("ACPI: scan: Reduce overhead related to devices with dependencies") Signed-off-by: Hans de Goede Cc: 6.5+ # 6.5+ Signed-off-by: Rafael J. Wysocki

Merge tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2024-03-14T18:10:43Z

Pull sound updates from Takashi Iwai: "This was a relatively calm development cycle. Most of changes are rather small device-specific fixes and enhancements. The only significant changes in ALSA core are code refactoring with the recent cleanup infrastructure, which should bring no functionality changes. Some highlights below: Core: - Lots of cleanups in ALSA core code with automatic kfree cleanup and locking guard macros - New ALSA core kunit test ASoC: - SoundWire support for AMD ACP 6.3 systems - Support for reporting version information for AVS firmware - Support DSPless mode for Intel Soundwire systems - Support for configuring CS35L56 amplifiers using EFI calibration data - Log which component is being operated on as part of power management trace events. - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x HD- and USB-audio: - More Cirrus HD-audio codec support - TAS2781 HD-audio codec fixes - Scarlett2 mixer fixes Others: - Enhancement of virtio driver for audio control supports - Cleanups of legacy PM code with new macros - Firewire sound updates" * tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits) ALSA: usb-audio: Stop parsing channels bits when all channels are found. ALSA: hda/tas2781: remove unnecessary runtime_pm calls ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models ALSA: aaci: Delete unused variable in aaci_do_suspend ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again ALSA: scarlett2: Fix Scarlett 4th Gen input gain range ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection ALSA: hda/tas2781: restore power state after system_resume ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend ALSA: hda/tas2781: add lock to system_suspend ALSA: hda/tas2781: use dev_dbg in system_resume ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57 ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57 ASoC: cs35l56: Add support for CS35L54 and CS35L57 ASoC: Intel: catpt: Carefully use PCI bitwise constants ALSA: hda: hda_component: Include sound/hda_codec.h ALSA: hda: hda_component: Add missing #include guards ...

platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57

2024-03-08T16:59:19Z

Add the ACPI HIDs and smi_node descriptions for the CS35L54 and CS35L57 Boosted Smart Amplifiers. Signed-off-by: Simon Trimmer Signed-off-by: Richard Fitzgerald Acked-by: Ilpo Järvinen Signed-off-by: Takashi Iwai Message-ID: <20240308135900.603192-4-rf@opensource.cirrus.com>

ACPI: scan: Consolidate Device Check and Bus Check notification handling

2024-02-27T16:54:59Z

There is no particular reason why device object subtree rescans in acpi_scan_device_check() and acpi_scan_device_check() should be carried out differently, so move the rescan code into a new function called acpi_scan_rescan_bus() and make both the functions above invoke it. While at it, in the Device Check case, start the device object subtree rescan mentioned above from the target device's parent, as per the specification. [1] Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#device-object-notification-values # [1] Signed-off-by: Rafael J. Wysocki Reviewed-by: Jonathan Cameron

ACPI: scan: Rework Device Check and Bus Check notification handling

2024-02-27T16:54:59Z

The underlying problem is the handling of the enabled bit in device status (bit 1 of _STA return value) which is required by the ACPI specification to be observed in addition to the present bit (bit 0 of _STA return value) [1], but Linux does not observe it. Since Linux has not looked at that bit for a long time, it is generally risky to start obseving it in all device enumeration cases, especially at the system initialization time, but it can be observed when the kernel receives a Bus Check or Device Check notification indicating a change in device configuration. In those cases, seeing the enabled bit clear may be regarded as an indication that the device at hand should not be used any more. For this reason, rework the handling of Device Check and Bus Check notifications in the ACPI core device enumeration code in the following way: 1. Rename acpi_bus_trim_one() to acpi_scan_check_and_detach() and make it check device status if its second argument is not NULL, in which case it will detach scan handlers or ACPI drivers from devices whose _STA returns the enabled bit clear. 2. Make acpi_scan_device_check() and acpi_scan_bus_check() invoke acpi_scan_check_and_detach() with a non-NULL second argument unconditionally, so scan handlers and ACPI drivers are detached from the target device and its ancestors if their _STA returns the enabled bit clear. Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status # [1] Signed-off-by: Rafael J. Wysocki Reviewed-by: Jonathan Cameron

ACPI: scan: Make acpi_processor_add() check the device enabled bit

2024-02-27T16:54:59Z

Modify acpi_processor_add() return an error if _STA returns the enabled bit clear for the given processor device, so as to avoid using processors that don't decode their resources, as per the ACPI specification. [1] Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status # [1] Signed-off-by: Rafael J. Wysocki Reviewed-by: Jonathan Cameron

ACPI: scan: Relocate acpi_bus_trim_one()

2024-02-27T16:54:59Z

Relocate acpi_bus_trim_one() (without modifications) so as to avoid the need to add a forward declaration of it in a subsequent patch. No functional changes. Signed-off-by: Rafael J. Wysocki Reviewed-by: Jonathan Cameron

ACPI: scan: Fix device check notification handling

2024-02-27T16:54:59Z

It is generally invalid to fail a Device Check notification if the scan handler has not been attached to the given device after a bus rescan, because there may be valid reasons for the scan handler to refuse attaching to the device (for example, the device is not ready). For this reason, modify acpi_scan_device_check() to return 0 in that case without printing a warning. While at it, reduce the log level of the "already enumerated" message in the same function, because it is only interesting when debugging notification handling Fixes: 443fc8202272 ("ACPI / hotplug: Rework generic code to handle suprise removals") Signed-off-by: Rafael J. Wysocki Reviewed-by: Jonathan Cameron

ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device

2024-02-12T17:55:40Z

Inside IVSC, switching ownership requires an interface with two different hardware modules, ACE and CSI. The software interface to these modules is based on Intel MEI framework. Usually mei client devices are dynamically created, so the info of consumers depending on mei client devices is not present in the firmware tables. This causes problems with the probe ordering with respect to drivers for consumers of these MEI client devices. But on these camera sensor devices, the ACPI nodes describing the sensors all have a _DEP dependency on the matching MEI bus ACPI device, so adding IVSC MEI bus ACPI device to acpi_honor_dep_ids allows solving the probe-ordering problem by deferring the enumeration of ACPI-devices which have a _DEP dependency on an IVSC mei bus ACPI device. Add INTC10CF, the HID of IVSC MEI bus ACPI device on MTL platform, to acpi_honor_dep_ids. Signed-off-by: Wentong Wu Signed-off-by: Rafael J. Wysocki

Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2024-01-18T23:16:57Z

Pull iommu updates from Joerg Roedel: "Core changes: - Fix race conditions in device probe path - Retire IOMMU bus_ops - Support for passing custom allocators to page table drivers - Clean up Kconfig around IOMMU_SVA - Support for sharing SVA domains with all devices bound to a mm - Firmware data parsing cleanup - Tracing improvements for iommu-dma code - Some smaller fixes and cleanups ARM-SMMU drivers: - Device-tree binding updates: - Add additional compatible strings for Qualcomm SoCs - Document Adreno clocks for Qualcomm's SM8350 SoC - SMMUv2: - Implement support for the ->domain_alloc_paging() callback - Ensure Secure context is restored following suspend of Qualcomm SMMU implementation - SMMUv3: - Disable stalling mode for the "quiet" context descriptor - Minor refactoring and driver cleanups Intel VT-d driver: - Cleanup and refactoring AMD IOMMU driver: - Improve IO TLB invalidation logic - Small cleanups and improvements Rockchip IOMMU driver: - DT binding update to add Rockchip RK3588 Apple DART driver: - Apple M1 USB4/Thunderbolt DART support - Cleanups Virtio IOMMU driver: - Add support for iotlb_sync_map - Enable deferred IO TLB flushes" * tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits) iommu: Don't reserve 0-length IOVA region iommu/vt-d: Move inline helpers to header files iommu/vt-d: Remove unused vcmd interfaces iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through() iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly iommu/sva: Fix memory leak in iommu_sva_bind_device() dt-bindings: iommu: rockchip: Add Rockchip RK3588 iommu/dma: Trace bounce buffer usage when mapping buffers iommu/arm-smmu: Convert to domain_alloc_paging() iommu/arm-smmu: Pass arm_smmu_domain to internal functions iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED iommu/arm-smmu: Convert to a global static identity domain iommu/arm-smmu: Reorganize arm_smmu_domain_add_master() iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent() iommu/arm-smmu-v3: Add a type for the STE iommu/arm-smmu-v3: disable stall for quiet_cd iommu/qcom: restore IOMMU state if needed iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible iommu/arm-smmu-qcom: Add missing GMU entry to match table ...