kernel/drivers/acpi/scan.c, branch linux-5.1.y

ACPI / scan: Create platform device for BSG2150 ACPI nodes

2019-02-05T17:38:20Z

The Point of View TAB-P1006W-232-3G tablet has an ACPI firmware node with a HID of BSG2150 describing the 2 Bosch sensors used in the device a BMC150 compatible accelerometer and a BMC150 compatible magnetometer. The ACPI firmware node actually contains 3 I2cSerialBusV2 resources, but this seems to be a copy and paste job from the BSG1160 firmware node on other devices, since there is no i2c-client listening to the 0x68 address listed in the third resource and the 0x68 address is identical to the address of the third resource in the BSG1160 nodes, where as the other 2 addresses are different. Add the ID to the I2C multi instantiate list, so that the i2c-multi-instantiate.c driver can handle it; And add the necessary info to the i2c-multi-instantiate.c driver to enumerate all I2C slaves correctly. To avoid triggering the: if (i < multi->num_clients) { dev_err(dev, "Error finding driver, idx %d\n", i); Error this commit lists the 3th device in the i2c_inst_data with a type of "bsg2150_dummy_dev". Signed-off-by: Hans de Goede Acked-by: Rafael J. Wysocki Signed-off-by: Andy Shevchenko

Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping

2018-12-28T22:12:21Z

Pull DMA mapping updates from Christoph Hellwig: "A huge update this time, but a lot of that is just consolidating or removing code: - provide a common DMA_MAPPING_ERROR definition and avoid indirect calls for dma_map_* error checking - use direct calls for the DMA direct mapping case, avoiding huge retpoline overhead for high performance workloads - merge the swiotlb dma_map_ops into dma-direct - provide a generic remapping DMA consistent allocator for architectures that have devices that perform DMA that is not cache coherent. Based on the existing arm64 implementation and also used for csky now. - improve the dma-debug infrastructure, including dynamic allocation of entries (Robin Murphy) - default to providing chaining scatterlist everywhere, with opt-outs for the few architectures (alpha, parisc, most arm32 variants) that can't cope with it - misc sparc32 dma-related cleanups - remove the dma_mark_clean arch hook used by swiotlb on ia64 and replace it with the generic noncoherent infrastructure - fix the return type of dma_set_max_seg_size (Niklas Söderlund) - move the dummy dma ops for not DMA capable devices from arm64 to common code (Robin Murphy) - ensure dma_alloc_coherent returns zeroed memory to avoid kernel data leaks through userspace. We already did this for most common architectures, but this ensures we do it everywhere. dma_zalloc_coherent has been deprecated and can hopefully be removed after -rc1 with a coccinelle script" * tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits) dma-mapping: fix inverted logic in dma_supported dma-mapping: deprecate dma_zalloc_coherent dma-mapping: zero memory returned from dma_alloc_* sparc/iommu: fix ->map_sg return value sparc/io-unit: fix ->map_sg return value arm64: default to the direct mapping in get_arch_dma_ops PCI: Remove unused attr variable in pci_dma_configure ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled dma-mapping: bypass indirect calls for dma-direct vmd: use the proper dma_* APIs instead of direct methods calls dma-direct: merge swiotlb_dma_ops into the dma_direct code dma-direct: use dma_direct_map_page to implement dma_direct_map_sg dma-direct: improve addressability error reporting swiotlb: remove dma_mark_clean swiotlb: remove SWIOTLB_MAP_ERROR ACPI / scan: Refactor _CCA enforcement dma-mapping: factor out dummy DMA ops dma-mapping: always build the direct mapping code dma-mapping: move dma_cache_sync out of line dma-mapping: move various slow path functions out of line ...

ACPI / scan: Refactor _CCA enforcement

2018-12-13T20:06:13Z

Rather than checking the DMA attribute at each callsite, just pass it through for acpi_dma_configure() to handle directly. That can then deal with the relatively exceptional DEV_DMA_NOT_SUPPORTED case by explicitly installing dummy DMA ops instead of just skipping setup entirely. This will then free up the dev->dma_ops == NULL case for some valuable fastpath optimisations. Signed-off-by: Robin Murphy Reviewed-by: Rafael J. Wysocki Acked-by: Jesper Dangaard Brouer Tested-by: Jesper Dangaard Brouer Signed-off-by: Christoph Hellwig Tested-by: Tony Luck

ACPI / scan: Create platform device for INT3515 ACPI nodes

2018-12-03T19:40:03Z

The ACPI device with INT3515 _HID is representing a complex USB PD hardware infrastructure which includes several I2C slave ICs. We add an ID to the I2C multi instantiate list to enumerate all I2C slaves correctly. Signed-off-by: Andy Shevchenko Reviewed-by: Heikki Krogerus Reviewed-by: Hans de Goede Acked-by: Heikki Krogerus Acked-by: Rafael J. Wysocki

Merge tag 'acpi-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2018-10-23T09:33:16Z

Pull ACPI updates from Rafael Wysocki: "These fix ACPICA issues related to the handling of module-level AML, fix an ordering issue during ACPI initialization, update ACPICA to upstream revision 20181003 (including fixes mostly), fix issues with system-wide suspend/resume related to the ACPI driver for Intel SoCs (LPSS), fix device enumeration issues on boards with Dollar Cove or Whiskey Cove Intel PMICs, prevent ACPICA from calling ktime_get() in unsuitable conditions, update a few drivers and clean up some code in several places. Specifics: - Fix ACPICA issues related to the handling of module-level AML and make the ACPI initialization code parse ECDT before loading the definition block tables (Erik Schmauss). - Update ACPICA to upstream revision 20181003 including fixes related to the ill-defined "generic serial bus" and the handling of the _REG object (Bob Moore). - Fix some issues with system-wide suspend/resume on Intel BYT/CHT related to the handling of I2C controllers in the ACPI LPSS driver for Intel SoCs (Hans de Goede). - Modify the ACPI namespace scanning code to enumerate INT33FE HID devices as platform devices with I2C resources to avoid device enumeration problems on boards with Dollar Cove or Whiskey Cove Intel PMICs (Hans de Goede). - Prevent ACPICA from using ktime_get() during early resume from system-wide suspend before resuming the timekeeping which generally is unsafe and triggers a warning from the timekeeping code (Bart Van Assche). - Add low-level real time clock support to the ACPI Time and Aalarm Device (TAD) driver (Rafael Wysocki). - Fix the ACPI SBS driver to avoid GPE storms on MacBook Pro and Oopses when removing modules (Ronald Tschalär). - Fix the ACPI PPTT parsing code to handle architecturally unknown cache types properly (Jeffrey Hugo). - Fix initialization issue in the ACPI processor driver (Dou Liyang). - Clean up the code in several places (Andy Shevchenko, Bartlomiej Zolnierkiewicz, David Arcari, zhong jiang)" * tag 'acpi-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (33 commits) ACPI / scan: Create platform device for INT33FE ACPI nodes ACPI / OSL: Use 'jiffies' as the time bassis for acpi_os_get_timer() ACPI: probe ECDT before loading AML tables regardless of module-level code flag ACPICA: Remove acpi_gbl_group_module_level_code and only use acpi_gbl_execute_tables_as_methods instead ACPICA: AML Parser: fix parse loop to correctly skip erroneous extended opcodes ACPICA: AML interpreter: add region addresses in global list during initialization ACPI: TAD: Add low-level support for real time capability ACPI: remove redundant 'default n' from Kconfig ACPI / SBS: Fix rare oops when removing modules ACPI / SBS: Fix GPE storm on recent MacBookPro's ACPI/PPTT: Handle architecturally unknown cache types drivers: base: cacheinfo: Do not populate sysfs for unknown cache types ACPICA: Update version to 20181003 ACPICA: Never run _REG on system_memory and system_IO ACPICA: Split large interpreter file ACPICA: Update for field unit access ACPICA: Rename some of the Field Attribute defines ACPICA: Update for generic_serial_bus and attrib_raw_process_bytes protocol ACPI / processor: Fix the return value of acpi_processor_ids_walk() ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq ...

ACPI / scan: Create platform device for INT33FE ACPI nodes

2018-10-18T07:26:37Z

Bay and Cherry Trail devices with a Dollar Cove or Whiskey Cove PMIC have an ACPI node with a HID of INT33FE which is a "virtual" battery device implementing a standard ACPI battery interface which depends upon a proprietary, undocument OpRegion called BMOP. Since we do have docs for the actual fuel-gauges used on these boards we instead use native fuel-gauge drivers talking directly to the fuel-gauge ICs on boards which rely on this INT33FE device for their battery monitoring. On boards with a Dollar Cove PMIC the INT33FE device's resources (_CRS) describe a non-existing I2C client at address 0x6b with a bus-speed of 100KHz. This is a problem on some boards since there are actual devices on that same bus which need a speed of 400KHz to function properly. This commit adds the INT33FE HID to the list of devices with I2C resources which should be enumerated as a platform-device rather then letting the i2c-core instantiate an i2c-client matching the first I2C resource, so that its bus-speed will not influence the max speed of the I2C bus. This fixes e.g. the touchscreen not working on the Teclast X98 II Plus. The INT33FE device on boards with a Whiskey Cove PMIC is somewhat special. Its first I2C resource is for a secondary I2C address of the PMIC itself, which is already described in an ACPI device with an INT34D3 HID. But it has 3 more I2C resources describing 3 other chips for which we do need to instantiate I2C clients and which need device-connections added between them for things to work properly. This special case is handled by the drivers/platform/x86/intel_cht_int33fe.c code. Before this commit that code was binding to the i2c-client instantiated for the secondary I2C address of the PMIC, since we now instantiate a platform device for the INT33FE device instead, this commit also changes the intel_cht_int33fe driver from an i2c driver to a platform driver. This also brings the intel_cht_int33fe drv inline with how we instantiate multiple i2c clients from a single ACPI device in other cases, as done by the drivers/platform/x86/i2c-multi-instantiate.c code. Reported-and-tested-by: Alexander Meiler Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki

dma-mapping: remove dma_deconfigure

2018-09-08T09:19:28Z

This goes through a lot of hooks just to call arch_teardown_dma_ops. Replace it with a direct call instead. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

ACPI / scan: Create platform device for fwnodes with multiple i2c devices

2018-08-09T10:12:16Z

Some devices have multiple I2cSerialBus resources and for things to work an i2c-client must be instantiated for each, each with its own i2c_device_id. Normally we only instantiate an i2c-client for the first resource, using the ACPI HID as id. This commit adds a list of HIDs of devices, which need multiple i2c-clients instantiated from a single fwnode, to acpi_device_enumeration_by_parent and makes acpi_device_enumeration_by_parent return false for these devices so that a platform device will be instantiated. This allows the drivers/platform/x86/i2c-multi-instantiate.c driver, which knows which i2c_device_id to use for each resource, to bind to the fwnode and initiate an i2c-client for each resource. Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki

ACPI / scan: Initialize status to ACPI_STA_DEFAULT

2018-08-09T09:04:26Z

Since commit 63347db0affa "ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs" the status field of normal acpi_devices gets set to 0 by acpi_bus_type_and_status() and filled with its actual value later when acpi_add_single_object() calls acpi_bus_get_status(). This means that any acpi_match_device_ids() calls in between will always fail with -ENOENT. We already have a workaround for this, which temporary forces status to ACPI_STA_DEFAULT in drivers/acpi/x86/utils.c: acpi_device_always_present() and the next commit in this series adds another acpi_match_device_ids() call between status being initialized as 0 and the acpi_bus_get_status() call. Rather then adding another workaround, this commit makes acpi_bus_type_and_status() initialize status to ACPI_STA_DEFAULT, this is safe to do as the only code looking at status between the initialization and the acpi_bus_get_status() call is those acpi_match_device_ids() calls. Note this does mean that we need to (re)set status to 0 in case the acpi_bus_get_status() call fails. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI / scan: Add static attribute to indirect_io_hosts[]

2018-08-09T08:51:49Z

Array indirect_io_hosts[] is declared in acpi_is_indirect_io_slave() as a const array, which means that the array will be re-built for each call. Optimise by adding the static attribute, which means that the array is added to const-data pool and not re-built per function call. Reported-by: Hans de Goede Signed-off-by: John Garry Signed-off-by: Rafael J. Wysocki