kernel/drivers/acpi/pmic, branch linux-5.1.y

Merge v5.0-rc7 into drm-next

2019-02-18T03:27:15Z

Backmerging for nouveau and imx that needed some fixes for next pulls. Signed-off-by: Dave Airlie

ACPI / PMIC: Add generic intel_soc_pmic_exec_mipi_pmic_seq_element handling

2019-01-09T09:35:03Z

Most PMIC-s use only a single i2c-address, so after verifying the i2c-address matches, we can simply pass the call to regmap_update_bits. This commit adds support for this and hooks this up for the xpower AXP288 PMIC by setting the new pmic_i2c_address field. This fixes the following errors on display on / off on a Jumper Ezpad mini 3 and an Onda V80 plus tablet, both of which use the AXP288: intel_soc_pmic_exec_mipi_pmic_seq_element: Not implemented intel_soc_pmic_exec_mipi_pmic_seq_element: i2c-addr: 0x34 reg-addr ... [drm:mipi_exec_pmic [i915]] *ERROR* mipi_exec_pmic failed, error: -95 Instead of these errors on both devices we now correctly turn on / off DLDO3 (through direct register manipulation). On the Onda V80 plus this fixes an issue with the backlight being brighter around the borders after an off / on cycle. This should also help to save some power when the display is off. Signed-off-by: Hans de Goede Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20190107111556.4510-4-hdegoede@redhat.com

ACPI / PMIC: Implement exec_mipi_pmic_seq_element for CHT Whiskey Cove PMIC

2019-01-09T09:35:03Z

Implement the exec_mipi_pmic_seq_element callback for the CHT Whiskey Cove PMIC. On some CHT devices this fixes the LCD panel not lighting up when it was not initialized by the GOP, because an external monitor was plugged in and the GOP initialized only the external monitor. Reviewed-by: Mika Westerberg Signed-off-by: Hans de Goede Link: https://patchwork.freedesktop.org/patch/msgid/20190107111556.4510-3-hdegoede@redhat.com

ACPI / PMIC: Add support for executing PMIC MIPI sequence elements

2019-01-09T09:35:02Z

DSI LCD panels describe an initialization sequence in the Video BIOS Tables using so called MIPI sequences. One possible element in these sequences is a PMIC specific element of 15 bytes. Although this is not really an ACPI opregion, the ACPI opregion code is the closest thing we have. We need to have support for these PMIC specific MIPI sequence elements somwhere. Since we already instantiate a special platform device for Intel PMICs for the ACPI PMIC OpRegion handler to bind to, with PMIC specific implementations of the OpRegion, the handling of MIPI sequence PMIC elements fits very well in the ACPI PMIC OpRegion code. This commit adds a new intel_soc_pmic_exec_mipi_pmic_seq_element() function, which is to be backed by a PMIC specific exec_mipi_pmic_seq_element callback. This function will be called by the i915 code to execture MIPI sequence PMIC elements. Reviewed-by: Mika Westerberg Signed-off-by: Hans de Goede Link: https://patchwork.freedesktop.org/patch/msgid/20190107111556.4510-2-hdegoede@redhat.com

ACPI / PMIC: xpower: Fix TS-pin current-source handling

2019-01-07T11:21:38Z

The current-source used for the battery temp-sensor (TS) is shared with the GPADC. For proper fuel-gauge and charger operation the TS current-source needs to be permanently on. But to read the GPADC we need to temporary switch the TS current-source to ondemand, so that the GPADC can use it, otherwise we will always read an all 0 value. The switching from on to on-ondemand is not necessary when the TS current-source is off (this happens on devices which do not have a TS). Prior to this commit there were 2 issues with our handling of the TS current-source switching: 1) We were writing hardcoded values to the ADC TS pin-ctrl register, overwriting various other unrelated bits. Specifically we were overwriting the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA independent of its original setting. On a Chuwi Vi10 tablet this was causing us to get a too high adc value (due to a too high current-source) resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in: ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR This commit fixes this by using regmap_update_bits to change only the relevant bits. 2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally enabling the TS current-source even on devices where the TS-pin is not used and the current-source thus was off on entry of the function. This commit fixes this by checking if the TS current-source is off when entering intel_xpower_pmic_get_raw_temp() and if so it is left as is. Fixes: 58eefe2f3f53 (ACPI / PMIC: xpower: Do pinswitch ... reading GPADC) Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Cc: 4.14+ # 4.14+ Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write

2018-10-25T15:00:05Z

intel_xpower_pmic_update_power() does a read-modify-write of the output control register. The i2c-designware code blocks the P-Unit I2C access during the read and write by taking the P-Unit's PMIC bus semaphore. But between the read and the write that semaphore is released and the P-Unit could make changes to the register which we then end up overwriting. This commit makes intel_xpower_pmic_update_power() take the semaphore itself so that it is held over the entire read-modify-write, avoiding this race. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: Convert drivers to use SPDX identifier

2018-09-10T10:57:55Z

Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: Sort headers alphabetically

2018-09-10T10:57:04Z

Sort headers alphabetically for better maintenance. No functional change. Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: CrystalCove: Extend PMOP support to support all possible fields

2018-08-14T21:55:09Z

Prior to this commit the CRC PMOP handler only supported the X285 and V18X PMOP fields. Leading to errors like these on device using the VBUS field: [ 765.766489] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [UserDefinedRegion] (20180531/evregion-266) [ 765.766526] ACPI Error: Method parse/execution failed \_SB.I2C1.BATC._BST, AE_BAD_PARAMETER (20180531/psparse-516) [ 765.766586] ACPI Error: AE_BAD_PARAMETER, Evaluating _BST (20180531/battery-577) This commit adds support for all known fields to the CRC PMOP OpRegion handler, the name and register info in this commit comes from: https://github.com/01org/ProductionKernelQuilts/blob/master/uefi/cht-m1stable/patches/0002-ACPI-Adding-support-for-WC-and-CRC-opregion.patch Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: Replace license boilerplate with SPDX license identifier

2018-02-22T22:14:58Z

Remove the GPL v2 license boilerplate and update with the SPDX license identifier. Signed-off-by: Rajmohan Mani Signed-off-by: Rafael J. Wysocki