kernel/arch, branch linux-rolling-stable

KVM: arm64: Eagerly init vgic dist/redist on vgic creation

2026-03-19T15:15:32Z

[ Upstream commit ac6769c8f948dff33265c50e524aebf9aa6f1be0 ] If vgic_allocate_private_irqs_locked() fails for any odd reason, we exit kvm_vgic_create() early, leaving dist->rd_regions uninitialised. kvm_vgic_dist_destroy() then comes along and walks into the weeds trying to free the RDs. Got to love this stuff. Solve it by moving all the static initialisation early, and make sure that if we fail halfway, we're in a reasonable shape to perform the rest of the teardown. While at it, reset the vgic model on failure, just in case... Reported-by: syzbot+f6a46b038fc243ac0175@syzkaller.appspotmail.com Tested-by: syzbot+f6a46b038fc243ac0175@syzkaller.appspotmail.com Fixes: b3aa9283c0c50 ("KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()") Link: https://lore.kernel.org/r/69a2d58c.050a0220.3a55be.003b.GAE@google.com Link: https://patch.msgid.link/20260228164559.936268-1-maz@kernel.org Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

KVM: arm64: gic: Set vgic_model before initing private IRQs

2026-03-19T15:15:32Z

[ Upstream commit 9435c1e1431003e23aa34ef8e46c30d09c3dbcb5 ] Different GIC types require the private IRQs to be initialised differently. GICv5 is the culprit as it supports both a different number of private IRQs, and all of these are PPIs (there are no SGIs). Moreover, as GICv5 uses the top bits of the interrupt ID to encode the type, the intid also needs to computed differently. Up until now, the GIC model has been set after initialising the private IRQs for a VCPU. Move this earlier to ensure that the GIC model is available when configuring the private IRQs. While we're at it, also move the setting of the in_kernel flag and implementation revision to keep them grouped together as before. Signed-off-by: Sascha Bischoff Reviewed-by: Jonathan Cameron Link: https://patch.msgid.link/20260128175919.3828384-7-sascha.bischoff@arm.com Signed-off-by: Marc Zyngier Stable-dep-of: ac6769c8f948 ("KVM: arm64: Eagerly init vgic dist/redist on vgic creation") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

x86/apic: Disable x2apic on resume if the kernel expects so

2026-03-19T15:15:27Z

commit 8cc7dd77a1466f0ec58c03478b2e735a5b289b96 upstream. When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram. Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0. The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the pre-sleep configuration or initial boot configuration for each CPU, including MSR state: When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot. (further ahead) If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes: CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction). (and other things) So at least as per the spec, re-enablement of x2apic by the firmware is allowed if "x2apic on" is a part of the initial boot configuration. [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization [ bp: Massage. ] Fixes: 6e1cb38a2aef ("x64, x2apic/intr-remap: add x2apic support, including enabling interrupt-remapping") Co-developed-by: Rahul Bukte Signed-off-by: Rahul Bukte Signed-off-by: Shashank Balaji Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Thomas Gleixner Reviewed-by: Sohil Mehta Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260306-x2apic-fix-v2-1-bee99c12efa3@sony.com Signed-off-by: Greg Kroah-Hartman

powerpc64/bpf: fix the address returned by bpf_get_func_ip

2026-03-19T15:15:27Z

commit 157820264ac3dadfafffad63184b883eb28f9ae0 upstream. bpf_get_func_ip() helper function returns the address of the traced function. It relies on the IP address stored at ctx - 16 by the bpf trampoline. On 64-bit powerpc, this address is recovered from LR accounting for OOL trampoline. But the address stored here was off by 4-bytes. Ensure the address is the actual start of the traced function. Reported-by: Abhishek Dubey Fixes: d243b62b7bd3 ("powerpc64/bpf: Add support for bpf trampolines") Cc: stable@vger.kernel.org Tested-by: Venkat Rao Bagalkote Signed-off-by: Hari Bathini Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260303181031.390073-3-hbathini@linux.ibm.com Signed-off-by: Greg Kroah-Hartman

powerpc64/bpf: fix kfunc call support

2026-03-19T15:15:27Z

commit 01b6ac72729610ae732ca2a66e3a642e23f6cd60 upstream. Commit 61688a82e047 ("powerpc/bpf: enable kfunc call") inadvertently enabled kfunc call support for 32-bit powerpc but that support will not be possible until ABI mismatch between 32-bit powerpc and eBPF is handled in 32-bit powerpc JIT code. Till then, advertise support only for 64-bit powerpc. Also, in powerpc ABI, caller needs to extend the arguments properly based on signedness. The JIT code is responsible for handling this explicitly for kfunc calls as verifier can't handle this for each architecture-specific ABI needs. But this was not taken care of while kfunc call support was enabled for powerpc. Fix it by handling this with bpf_jit_find_kfunc_model() and using zero_extend() & sign_extend() helper functions. Fixes: 61688a82e047 ("powerpc/bpf: enable kfunc call") Cc: stable@vger.kernel.org Signed-off-by: Hari Bathini Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260303181031.390073-7-hbathini@linux.ibm.com Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: Correct MSI allocation tracking

2026-03-19T15:15:27Z

commit 35e4f2a17eb40288f9bcdb09549fa04a63a96279 upstream. The per-device MSI allocation calculation in pseries_irq_domain_alloc() is clearly wrong. It can still happen to work when nr_irqs is 1. Correct it. Fixes: c0215e2d72de ("powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded") Cc: stable@vger.kernel.org Signed-off-by: Nam Cao Reviewed-by: Mahesh Salgaonkar Reviewed-by: Nilay Shroff [maddy: Fixed Nilay's reviewed-by tag] Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260302003948.1452016-1-namcao@linutronix.de Signed-off-by: Greg Kroah-Hartman

s390/xor: Fix xor_xc_5() inline assembly

2026-03-19T15:15:21Z

commit 5f25805303e201f3afaff0a90f7c7ce257468704 upstream. xor_xc_5() contains a larl 1,2f that is not used by the asm and is not declared as a clobber. This can corrupt a compiler-allocated value in %r1 and lead to miscompilation. Remove the instruction. Fixes: 745600ed6965 ("s390/lib: Use exrl instead of ex in xor functions") Cc: stable@vger.kernel.org Reviewed-by: Juergen Christ Reviewed-by: Heiko Carstens Reviewed-by: Sven Schnelle Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman

s390/xor: Fix xor_xc_2() inline assembly constraints

2026-03-19T15:15:21Z

commit f775276edc0c505dc0f782773796c189f31a1123 upstream. The inline assembly constraints for xor_xc_2() are incorrect. "bytes", "p1", and "p2" are input operands, while all three of them are modified within the inline assembly. Given that the function consists only of this inline assembly it seems unlikely that this may cause any problems, however fix this in any case. Fixes: 2cfc5f9ce7f5 ("s390/xor: optimized xor routing using the XC instruction") Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Reviewed-by: Vasily Gorbik Link: https://lore.kernel.org/r/20260302133500.1560531-2-hca@linux.ibm.com Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman

s390/stackleak: Fix __stackleak_poison() inline assembly constraint

2026-03-19T15:15:21Z

commit 674c5ff0f440a051ebf299d29a4c013133d81a65 upstream. The __stackleak_poison() inline assembly comes with a "count" operand where the "d" constraint is used. "count" is used with the exrl instruction and "d" means that the compiler may allocate any register from 0 to 15. If the compiler would allocate register 0 then the exrl instruction would not or the value of "count" into the executed instruction - resulting in a stackframe which is only partially poisoned. Use the correct "a" constraint, which excludes register 0 from register allocation. Fixes: 2a405f6bb3a5 ("s390/stackleak: provide fast __stackleak_poison() implementation") Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Reviewed-by: Vasily Gorbik Link: https://lore.kernel.org/r/20260302133500.1560531-4-hca@linux.ibm.com Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman

parisc: Check kernel mapping earlier at bootup

2026-03-19T15:15:20Z

commit 17c144f1104bfc29a3ce3f7d0931a1bfb7a3558c upstream. The check if the initial mapping is sufficient needs to happen much earlier during bootup. Move this test directly to the start_parisc() function and use native PDC iodc functions to print the warning, because panic() and printk() are not functional yet. This fixes boot when enabling various KALLSYSMS options which need much more space. Signed-off-by: Helge Deller Cc: # v6.0+ Signed-off-by: Greg Kroah-Hartman