kernel/arch, branch linux-3.2.y

x86/MCE: Save microcode revision in machine check records

2018-05-31T23:30:20Z

commit fa94d0c6e0f3431523f5701084d799c77c7d4a4f upstream. Updating microcode used to be relatively rare. Now that it has become more common we should save the microcode version in a machine check record to make sure that those people looking at the error have this important information bundled with the rest of the logged information. [ Borislav: Simplify a bit. ] Signed-off-by: Tony Luck Signed-off-by: Borislav Petkov Signed-off-by: Thomas Gleixner Cc: Yazen Ghannam Cc: linux-edac Link: http://lkml.kernel.org/r/20180301233449.24311-1-tony.luck@intel.com [bwh: Backported to 3.2: - Add other new fields to struct mce, to match upstream UAPI - Adjust filename, context] Signed-off-by: Ben Hutchings

x86/mm: Fix {pmd,pud}_{set,clear}_flags()

2018-05-31T23:30:17Z

commit 842cef9113c2120f74f645111ded1e020193d84c upstream. Just like pte_{set,clear}_flags() their PMD and PUD counterparts should not do any address translation. This was outright wrong under Xen (causing a dead boot with no useful output on "suitable" systems), and produced needlessly more complicated code (even if just slightly) when paravirt was enabled. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Acked-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Boris Ostrovsky Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/5A8AF1BB02000078001A91C3@prv-mh.provo.novell.com Signed-off-by: Ingo Molnar [bwh: Backported to 3.2: - There aren't any pud_{set,clear}_flags() functions - There's no p4d level] Signed-off-by: Ben Hutchings

powerpc/pseries: Add empty update_numa_cpu_lookup_table() for NUMA=n

2018-05-31T23:30:16Z

commit c1e150ceb61e4a585bad156da15c33bfe89f5858 upstream. When CONFIG_NUMA is not set, the build fails with: arch/powerpc/platforms/pseries/hotplug-cpu.c:335:4: error: déclaration implicite de la fonction « update_numa_cpu_lookup_table » So we have to add update_numa_cpu_lookup_table() as an empty function when CONFIG_NUMA is not set. Fixes: 1d9a090783be ("powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove") Signed-off-by: Corentin Labbe Signed-off-by: Michael Ellerman Signed-off-by: Ben Hutchings

powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove

2018-05-31T23:30:13Z

commit 1d9a090783bef19fe8cdec878620d22f05191316 upstream. When DLPAR removing a CPU, the unmapping of the cpu from a node in unmap_cpu_from_node() should also invalidate the CPUs entry in the numa_cpu_lookup_table. There is not a guarantee that on a subsequent DLPAR add of the CPU the associativity will be the same and thus could be in a different node. Invalidating the entry in the numa_cpu_lookup_table causes the associativity to be read from the device tree at the time of the add. The current behavior of not invalidating the CPUs entry in the numa_cpu_lookup_table can result in scenarios where the the topology layout of CPUs in the partition does not match the device tree or the topology reported by the HMC. This bug looks like it was introduced in 2004 in the commit titled "ppc64: cpu hotplug notifier for numa", which is 6b15e4e87e32 in the linux-fullhist tree. Hence tag it for all stable releases. Signed-off-by: Nathan Fontenot Reviewed-by: Tyrel Datwyler Signed-off-by: Michael Ellerman [bwh: Backported to 3.2: - update_numa_cpu_lookup_table() wasn't defined anywhere before - Adjust context] Signed-off-by: Ben Hutchings

MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS

2018-05-31T23:30:12Z

commit 0cde5b44a30f1daaef1c34e08191239dc63271c4 upstream. When commit b27311e1cace ("MIPS: TXx9: Add RBTX4939 board support") added board support for the RBTX4939, it added a call to led_classdev_register even if the LED class is built as a module. Built-in arch code cannot call module code directly like this. Commit b33b44073734 ("MIPS: TXX9: use IS_ENABLED() macro") subsequently changed the inclusion of this code to a single check that CONFIG_LEDS_CLASS is either builtin or a module, but the same issue remains. This leads to MIPS allmodconfig builds failing when CONFIG_MACH_TX49XX=y is set: arch/mips/txx9/rbtx4939/setup.o: In function `rbtx4939_led_probe': setup.c:(.init.text+0xc0): undefined reference to `of_led_classdev_register' make: *** [Makefile:999: vmlinux] Error 1 Fix this by using the IS_BUILTIN() macro instead. Fixes: b27311e1cace ("MIPS: TXx9: Add RBTX4939 board support") Signed-off-by: Matt Redfearn Reviewed-by: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18544/ Signed-off-by: James Hogan Signed-off-by: Ben Hutchings

MIPS: TXX9: use IS_ENABLED() macro

2018-05-31T23:30:12Z

commit b33b44073734842ec0c75d376c40d0471d6113ff upstream. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3334/ Signed-off-by: Ralf Baechle Signed-off-by: Ben Hutchings

s390: fix handling of -1 in set{,fs}[gu]id16 syscalls

2018-05-31T23:30:10Z

commit 6dd0d2d22aa363fec075cb2577ba273ac8462e94 upstream. For some reason, the implementation of some 16-bit ID system calls (namely, setuid16/setgid16 and setfsuid16/setfsgid16) used type cast instead of low2highgid/low2highuid macros for converting [GU]IDs, which led to incorrect handling of value of -1 (which ought to be considered invalid). Discovered by strace test suite. Signed-off-by: Eugene Syromiatnikov Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

alpha: fix crash if pthread_create races with signal delivery

2018-05-31T23:30:09Z

commit 21ffceda1c8b3807615c40d440d7815e0c85d366 upstream. On alpha, a process will crash if it attempts to start a thread and a signal is delivered at the same time. The crash can be reproduced with this program: https://cygwin.com/ml/cygwin/2014-11/msg00473.html The reason for the crash is this: * we call the clone syscall * we go to the function copy_process * copy process calls copy_thread_tls, it is a wrapper around copy_thread * copy_thread sets the tls pointer: childti->pcb.unique = regs->r20 * copy_thread sets regs->r20 to zero * we go back to copy_process * copy process checks "if (signal_pending(current))" and returns -ERESTARTNOINTR * the clone syscall is restarted, but this time, regs->r20 is zero, so the new thread is created with zero tls pointer * the new thread crashes in start_thread when attempting to access tls The comment in the code says that setting the register r20 is some compatibility with OSF/1. But OSF/1 doesn't use the CLONE_SETTLS flag, so we don't have to zero r20 if CLONE_SETTLS is set. This patch fixes the bug by zeroing regs->r20 only if CLONE_SETTLS is not set. Signed-off-by: Mikulas Patocka Signed-off-by: Matt Turner [bwh: Backported to 3.2: - Remove the settls variable, which was done upstream in commit 25906730ec01 "alpha: reorganize copy_process(), prepare to saner fork_idle()"] - Adjust context] Signed-off-by: Ben Hutchings

alpha: fix reboot on Avanti platform

2018-05-31T23:30:09Z

commit 55fc633c41a08ce9244ff5f528f420b16b1e04d6 upstream. We need to define NEED_SRM_SAVE_RESTORE on the Avanti, otherwise we get machine check exception when attempting to reboot the machine. Signed-off-by: Mikulas Patocka Signed-off-by: Matt Turner Signed-off-by: Ben Hutchings

MIPS: Fix clean of vmlinuz.{32,ecoff,bin,srec}

2018-05-31T23:30:09Z

commit 5f2483eb2423152445b39f2db59d372f523e664e upstream. Make doesn't expand shell style "vmlinuz.{32,ecoff,bin,srec}" to the 4 separate files, so none of these files get cleaned up by make clean. List the files separately instead. Fixes: ec3352925b74 ("MIPS: Remove all generated vmlinuz* files on "make clean"") Signed-off-by: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18491/ Signed-off-by: Ben Hutchings