kernel/arch/xtensa, branch linux-4.18.y

xtensa: fix boot parameters address translation

2018-11-21T08:22:02Z

commit 40dc948f234b73497c3278875eb08a01d5854d3f upstream. The bootloader may pass physical address of the boot parameters structure to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in the arch/xtensa/kernel/head.S is supposed to map that physical address to the virtual address in the configured virtual memory layout. This code haven't been updated when additional 256+256 and 512+512 memory layouts were introduced and it may produce wrong addresses when used with these layouts. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov Signed-off-by: Greg Kroah-Hartman

xtensa: make sure bFLT stack is 16 byte aligned

2018-11-21T08:22:02Z

commit 0773495b1f5f1c5e23551843f87b5ff37e7af8f7 upstream. Xtensa ABI requires stack alignment to be at least 16. In noMMU configuration ARCH_SLAB_MINALIGN is used to align stack. Make it at least 16. This fixes the following runtime error in noMMU configuration, caused by interaction between insufficiently aligned stack and alloca function, that results in corruption of on-stack variable in the libc function glob: Caught unhandled exception in 'sh' (pid = 47, pc = 0x02d05d65) - should not happen EXCCAUSE is 15 Cc: stable@vger.kernel.org Signed-off-by: Max Filippov Signed-off-by: Greg Kroah-Hartman

xtensa: add NOTES section to the linker script

2018-11-21T08:22:02Z

commit 4119ba211bc4f1bf638f41e50b7a0f329f58aa16 upstream. This section collects all source .note.* sections together in the vmlinux image. Without it .note.Linux section may be placed at address 0, while the rest of the kernel is at its normal address, resulting in a huge vmlinux.bin image that may not be linked into the xtensa Image.elf. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov Signed-off-by: Greg Kroah-Hartman

xtensa: ISS: don't allocate memory in platform_setup

2018-09-26T06:39:34Z

commit ef439d49e0bfb26cd5f03c88b4cb7cc9073ed30c upstream. Memory allocator is not initialized at that point yet, use static array instead. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov Signed-off-by: Greg Kroah-Hartman

xtensa: increase ranges in ___invalidate_{i,d}cache_all

2018-09-09T08:32:37Z

commit fec3259c9f747c039f90e99570540114c8d81a14 upstream. Cache invalidation macros use cache line size to iterate over invalidated cache lines, assuming that all cache ways are invalidated by single instruction, but xtensa ISA recommends to not assume that for future compatibility: In some implementations all ways at index Addry-1..z are invalidated regardless of the specified way, but for future compatibility this behavior should not be assumed. Iterate over all cache ways in ___invalidate_icache_all and ___invalidate_dcache_all. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov Signed-off-by: Greg Kroah-Hartman

xtensa: limit offsets in __loop_cache_{all,page}

2018-09-09T08:32:37Z

commit be75de25251f7cf3e399ca1f584716a95510d24a upstream. When building kernel for xtensa cores with big cache lines (e.g. 128 bytes or more) __loop_cache_all and __loop_cache_page may generate assembly instructions with immediate fields that are too big. This results in the following build errors: arch/xtensa/mm/misc.S: Assembler messages: arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '256' arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '384' arch/xtensa/kernel/head.S: Assembler messages: arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '256' arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '384' arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '256' arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '384' arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '256' arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '384' Add parameter max_immed to these macros and use it to limit values of immediate operands. Extract common code of these macros into the new macro __loop_cache_unroll. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov Signed-off-by: Greg Kroah-Hartman

docs: Fix some broken references

2018-06-15T21:10:01Z

As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai Acked-by: Masami Hiramatsu Acked-by: Stephen Boyd Acked-by: Charles Keepax Acked-by: Mathieu Poirier Reviewed-by: Coly Li Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet

Kbuild: rename HAVE_CC_STACKPROTECTOR config variable

2018-06-14T22:15:28Z

HAVE_CC_STACKPROTECTOR should be selected by architectures with stack canary implementation. It is not about the compiler support. For the consistency with commit 050e9baa9dc9 ("Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables"), remove 'CC_' from the config symbol. I moved the 'select' lines to keep the alphabetical sorting. Signed-off-by: Masahiro Yamada Acked-by: Kees Cook Signed-off-by: Linus Torvalds

Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables

2018-06-14T03:21:18Z

The changes to automatically test for working stack protector compiler support in the Kconfig files removed the special STACKPROTECTOR_AUTO option that picked the strongest stack protector that the compiler supported. That was all a nice cleanup - it makes no sense to have the AUTO case now that the Kconfig phase can just determine the compiler support directly. HOWEVER. It also meant that doing "make oldconfig" would now _disable_ the strong stackprotector if you had AUTO enabled, because in a legacy config file, the sane stack protector configuration would look like CONFIG_HAVE_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_NONE is not set # CONFIG_CC_STACKPROTECTOR_REGULAR is not set # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_CC_STACKPROTECTOR_AUTO=y and when you ran this through "make oldconfig" with the Kbuild changes, it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version used to be disabled (because it was really enabled by AUTO), and would disable it in the new config, resulting in: CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_CC_HAS_SANE_STACKPROTECTOR=y That's dangerously subtle - people could suddenly find themselves with the weaker stack protector setup without even realizing. The solution here is to just rename not just the old RECULAR stack protector option, but also the strong one. This does that by just removing the CC_ prefix entirely for the user choices, because it really is not about the compiler support (the compiler support now instead automatially impacts _visibility_ of the options to users). This results in "make oldconfig" actually asking the user for their choice, so that we don't have any silent subtle security model changes. The end result would generally look like this: CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_CC_HAS_SANE_STACKPROTECTOR=y where the "CC_" versions really are about internal compiler infrastructure, not the user selections. Acked-by: Masahiro Yamada Signed-off-by: Linus Torvalds

Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-06-07T19:45:58Z

Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...