kernel/arch/xtensa/include/asm/initialize_mmu.h, branch linux-5.1.y

xtensa: rework noMMU cache attributes initialization

2018-08-14T03:08:19Z

Marking default memory region as cached is not always sufficient and is not flexible. Allow specifying cache attributes for the whole memory address space with new config entry MEMMAP_CACHEATTR. Apply it after cache initialization. Signed-off-by: Max Filippov

xtensa: cleanup MMU setup and kernel layout macros

2016-07-24T03:33:58Z

Make kernel load address explicit, independent of the selected MMU configuration and configurable from Kconfig. Do not restrict it to the first 512MB of the physical address space. Cleanup kernel memory layout macros: - rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR; - drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS; - introduce PHYS_OFFSET and use it in __va and __pa definitions; - synchronize MMU/noMMU vectors, drop unused NMI vector; - replace hardcoded vectors offset of 0x3000 with Kconfig symbol. Signed-off-by: Max Filippov

xtensa: add alternative kernel memory layouts

2016-07-24T03:33:58Z

MMUv3 is able to support low memory bigger than 128MB. Implement 256MB and 512MB KSEG layouts: - add Kconfig selector for KSEG layout; - add KSEG base address, size and alignment definitions to arch/xtensa/include/asm/kmem_layout.h; - use new definitions in TLB initialization; - add build time memory map consistency checks. See Documentation/xtensa/mmu.txt for the details of new memory layouts. Signed-off-by: Max Filippov

xtensa: fix build for configs without cache options

2015-11-02T15:02:51Z

- make cache-related assembly macros empty if core doesn't have corresponding cache type; - don't initialize cache attributes in instruction/data TLB entries if there's no corresponding cache type. Signed-off-by: Max Filippov

xtensa: nommu: set up cache and atomctl in initialize_mmu

2014-10-21T09:28:56Z

initialize_mmu sets up atomctl SR which is needed for s32c1i to function correctly even in noMMU configurations. It's also a good place to set up caching attributes of physical memory. Allow enabling INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX in noMMU configurations for setting up atomctl and cache attributes. Signed-off-by: Max Filippov

xtensa: move vecbase SR initialization to _startup

2014-10-21T09:28:55Z

Instead of initializing vecbase in initialize_mmu macro, which may be expanded either in Image.elf reset vector hadler or in the kernel head.S, both times only when CONFIG_MMU is enabled, do this initialization once in _startup function. Signed-off-by: Max Filippov

xtensa: remap io area defined in device tree

2014-01-14T20:25:14Z

Use the simple-bus node to discover the io area, and remap the cached and bypass io ranges. The parent-bus-address value of the first triplet in the "ranges" property is used. This value is rounded down to the nearest 256MB boundary. The length of the io area is fixed at 256MB; the "ranges" property length value is ignored. Other limitations: (1) only the first simple-bus node is considered, and (2) only the first triplet of the "ranges" property is considered. See ePAPR 1.1 §6.5 for the simple-bus node description, and §2.3.8 for the "ranges" property description. Signed-off-by: Baruch Siach Signed-off-by: Max Filippov

xtensa: avoid duplicate of IO range definitions

2014-01-14T20:21:24Z

Define IO addresses in a single place, to make it easier to change for non-standard memory maps. Signed-off-by: Baruch Siach Signed-off-by: Max Filippov

xtensa: add MMU v3 support

2013-05-09T08:07:09Z

MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB way 6: Way 6 (512 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0x00000000 0x00000000 0x01 0x03 RWX Bypass 0x20000000 0x20000000 0x01 0x03 RWX Bypass 0x40000000 0x40000000 0x01 0x03 RWX Bypass 0x60000000 0x60000000 0x01 0x03 RWX Bypass 0x80000000 0x80000000 0x01 0x03 RWX Bypass 0xa0000000 0xa0000000 0x01 0x03 RWX Bypass 0xc0000000 0xc0000000 0x01 0x03 RWX Bypass 0xe0000000 0xe0000000 0x01 0x03 RWX Bypass This patch adds remapping code at the reset vector or at the kernel _start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that reconfigures MMUv3 as MMUv2: Way 5 (128 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xd0000000 0x00000000 0x01 0x07 RWX WB 0xd8000000 0x00000000 0x01 0x03 RWX Bypass Way 6 (256 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xe0000000 0xf0000000 0x01 0x07 RWX WB 0xf0000000 0xf0000000 0x01 0x03 RWX Bypass Signed-off-by: Max Filippov Signed-off-by: Chris Zankel

xtensa: initialize atomctl SR

2012-12-19T05:10:22Z

In order to use S32C1I instruction on cores with ATOMCTL SR the register must be properly initialized. Signed-off-by: Max Filippov Signed-off-by: Chris Zankel