kernel/arch/x86/include/asm/string_64.h, branch linux-5.1.y

x86/asm: Remove dead GNUC conditionals

2019-01-12T16:50:48Z

The minimum supported gcc version is >= 4.6, so these can be removed. Signed-off-by: Rasmus Villemoes Signed-off-by: Borislav Petkov Cc: "H. Peter Anvin" Cc: Dan Williams Cc: Geert Uytterhoeven Cc: Ingo Molnar Cc: Matthew Wilcox Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: x86-ml Link: https://lkml.kernel.org/r/20190111084931.24601-1-linux@rasmusvillemoes.dk

x86: re-introduce non-generic memcpy_{to,from}io

2019-01-05T02:15:33Z

This has been broken forever, and nobody ever really noticed because it's purely a performance issue. Long long ago, in commit 6175ddf06b61 ("x86: Clean up mem*io functions") Brian Gerst simplified the memory copies to and from iomem, since on x86, the instructions to access iomem are exactly the same as the regular instructions. That is technically true, and things worked, and nobody said anything. Besides, back then the regular memcpy was pretty simple and worked fine. Nobody noticed except for David Laight, that is. David has a testing a TLP monitor he was writing for an FPGA, and has been occasionally complaining about how memcpy_toio() writes things one byte at a time. Which is completely unacceptable from a performance standpoint, even if it happens to technically work. The reason it's writing one byte at a time is because while it's technically true that accesses to iomem are the same as accesses to regular memory on x86, the _granularity_ (and ordering) of accesses matter to iomem in ways that they don't matter to regular cached memory. In particular, when ERMS is set, we default to using "rep movsb" for larger memory copies. That is indeed perfectly fine for real memory, since the whole point is that the CPU is going to do cacheline optimizations and executes the memory copy efficiently for cached memory. With iomem? Not so much. With iomem, "rep movsb" will indeed work, but it will copy things one byte at a time. Slowly and ponderously. Now, originally, back in 2010 when commit 6175ddf06b61 was done, we didn't use ERMS, and this was much less noticeable. Our normal memcpy() was simpler in other ways too. Because in fact, it's not just about using the string instructions. Our memcpy() these days does things like "read and write overlapping values" to handle the last bytes of the copy. Again, for normal memory, overlapping accesses isn't an issue. For iomem? It can be. So this re-introduces the specialized memcpy_toio(), memcpy_fromio() and memset_io() functions. It doesn't particularly optimize them, but it tries to at least not be horrid, or do overlapping accesses. In fact, this uses the existing __inline_memcpy() function that we still had lying around that uses our very traditional "rep movsl" loop followed by movsw/movsb for the final bytes. Somebody may decide to try to improve on it, but if we've gone almost a decade with only one person really ever noticing and complaining, maybe it's not worth worrying about further, once it's not _completely_ broken? Reported-by: David Laight Signed-off-by: Linus Torvalds

x86/asm: Optimize memcpy_flushcache()

2018-09-10T13:17:12Z

I use memcpy_flushcache() in my persistent memory driver for metadata updates, there are many 8-byte and 16-byte updates and it turns out that the overhead of memcpy_flushcache causes 2% performance degradation compared to "movnti" instruction explicitly coded using inline assembler. The tests were done on a Skylake processor with persistent memory emulated using the "memmap" kernel parameter. dd was used to copy data to the dm-writecache target. This patch recognizes memcpy_flushcache calls with constant short length and turns them into inline assembler - so that I don't have to use inline assembler in the driver. Signed-off-by: Mikulas Patocka Cc: Dan Williams Cc: Linus Torvalds Cc: Mike Snitzer Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: device-mapper development Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1808081720460.24747@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Ingo Molnar

x86/asm/memcpy_mcsafe: Return bytes remaining

2018-05-15T06:32:42Z

Machine check safe memory copies are currently deployed in the pmem driver whenever reading from persistent memory media, so that -EIO is returned rather than triggering a kernel panic. While this protects most pmem accesses, it is not complete in the filesystem-dax case. When filesystem-dax is enabled reads may bypass the block layer and the driver via dax_iomap_actor() and its usage of copy_to_iter(). In preparation for creating a copy_to_iter() variant that can handle machine checks, teach memcpy_mcsafe() to return the number of bytes remaining rather than -EFAULT when an exception occurs. Co-developed-by: Tony Luck Signed-off-by: Dan Williams Cc: Al Viro Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Cc: hch@lst.de Cc: linux-fsdevel@vger.kernel.org Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/152539238119.31796.14318473522414462886.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar

x86/asm/memcpy_mcsafe: Remove loop unrolling

2018-05-15T06:32:41Z

In preparation for teaching memcpy_mcsafe() to return 'bytes remaining' rather than pass / fail, simplify the implementation to remove loop unrolling. The unrolling complicates the fault handling for negligible benefit given modern CPUs perform loop stream detection. Suggested-by: Linus Torvalds Signed-off-by: Dan Williams Cc: Al Viro Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Cc: hch@lst.de Cc: linux-fsdevel@vger.kernel.org Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/152539237092.31796.9115692316555638048.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar

kmemcheck: rip it out

2017-11-16T02:21:05Z

Fix up makefiles, remove references, and git rm kmemcheck. Link: http://lkml.kernel.org/r/20171007030159.22241-4-alexander.levin@verizon.com Signed-off-by: Sasha Levin Cc: Steven Rostedt Cc: Vegard Nossum Cc: Pekka Enberg Cc: Michal Hocko Cc: Eric W. Biederman Cc: Alexander Potapenko Cc: Tim Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86: implement memset16, memset32 & memset64

2017-09-09T01:26:48Z

These are single instructions on x86. There's no 64-bit instruction for x86-32, but we don't yet have any user for memset64() on 32-bit architectures, so don't bother to implement it. Link: http://lkml.kernel.org/r/20170720184539.31609-4-willy@infradead.org Signed-off-by: Matthew Wilcox Cc: Minchan Kim Cc: Michael Ellerman Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: David Miller Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Ralf Baechle Cc: Richard Henderson Cc: Russell King Cc: Sam Ravnborg Cc: Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

include/linux/string.h: add the option of fortified string.h functions

2017-07-12T23:26:03Z

This adds support for compiling with a rough equivalent to the glibc _FORTIFY_SOURCE=1 feature, providing compile-time and runtime buffer overflow checks for string.h functions when the compiler determines the size of the source or destination buffer at compile-time. Unlike glibc, it covers buffer reads in addition to writes. GNU C __builtin_*_chk intrinsics are avoided because they would force a much more complex implementation. They aren't designed to detect read overflows and offer no real benefit when using an implementation based on inline checks. Inline checks don't add up to much code size and allow full use of the regular string intrinsics while avoiding the need for a bunch of _chk functions and per-arch assembly to avoid wrapper overhead. This detects various overflows at compile-time in various drivers and some non-x86 core kernel code. There will likely be issues caught in regular use at runtime too. Future improvements left out of initial implementation for simplicity, as it's all quite optional and can be done incrementally: * Some of the fortified string functions (strncpy, strcat), don't yet place a limit on reads from the source based on __builtin_object_size of the source buffer. * Extending coverage to more string functions like strlcat. * It should be possible to optionally use __builtin_object_size(x, 1) for some functions (C strings) to detect intra-object overflows (like glibc's _FORTIFY_SOURCE=2), but for now this takes the conservative approach to avoid likely compatibility issues. * The compile-time checks should be made available via a separate config option which can be enabled by default (or always enabled) once enough time has passed to get the issues it catches fixed. Kees said: "This is great to have. While it was out-of-tree code, it would have blocked at least CVE-2016-3858 from being exploitable (improper size argument to strlcpy()). I've sent a number of fixes for out-of-bounds-reads that this detected upstream already" [arnd@arndb.de: x86: fix fortified memcpy] Link: http://lkml.kernel.org/r/20170627150047.660360-1-arnd@arndb.de [keescook@chromium.org: avoid panic() in favor of BUG()] Link: http://lkml.kernel.org/r/20170626235122.GA25261@beast [keescook@chromium.org: move from -mm, add ARCH_HAS_FORTIFY_SOURCE, tweak Kconfig help] Link: http://lkml.kernel.org/r/20170526095404.20439-1-danielmicay@gmail.com Link: http://lkml.kernel.org/r/1497903987-21002-8-git-send-email-keescook@chromium.org Signed-off-by: Daniel Micay Signed-off-by: Kees Cook Signed-off-by: Arnd Bergmann Acked-by: Kees Cook Cc: Mark Rutland Cc: Daniel Axtens Cc: Rasmus Villemoes Cc: Andy Shevchenko Cc: Chris Metcalf Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations

2017-06-09T16:09:56Z

The pmem driver has a need to transfer data with a persistent memory destination and be able to rely on the fact that the destination writes are not cached. It is sufficient for the writes to be flushed to a cpu-store-buffer (non-temporal / "movnt" in x86 terms), as we expect userspace to call fsync() to ensure data-writes have reached a power-fail-safe zone in the platform. The fsync() triggers a REQ_FUA or REQ_FLUSH to the pmem driver which will turn around and fence previous writes with an "sfence". Implement a __copy_from_user_inatomic_flushcache, memcpy_page_flushcache, and memcpy_flushcache, that guarantee that the destination buffer is not dirty in the cpu cache on completion. The new copy_from_iter_flushcache and sub-routines will be used to replace the "pmem api" (include/linux/pmem.h + arch/x86/include/asm/pmem.h). The availability of copy_from_iter_flushcache() and memcpy_flushcache() are gated by the CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE config symbol, and fallback to copy_from_iter_nocache() and plain memcpy() otherwise. This is meant to satisfy the concern from Linus that if a driver wants to do something beyond the normal nocache semantics it should be something private to that driver [1], and Al's concern that anything uaccess related belongs with the rest of the uaccess code [2]. The first consumer of this interface is a new 'copy_from_iter' dax operation so that pmem can inject cache maintenance operations without imposing this overhead on other dax-capable drivers. [1]: https://lists.01.org/pipermail/linux-nvdimm/2017-January/008364.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2017-April/009942.html Cc: Cc: Jan Kara Cc: Jeff Moyer Cc: Ingo Molnar Cc: Christoph Hellwig Cc: Toshi Kani Cc: "H. Peter Anvin" Cc: Al Viro Cc: Thomas Gleixner Cc: Matthew Wilcox Reviewed-by: Ross Zwisler Signed-off-by: Dan Williams