kernel/arch/um/drivers/line.c, branch linux-rolling-stable

um: line: always fill *error_out in setup_one_line()

2024-09-12T09:12:59Z

[ Upstream commit 824ac4a5edd3f7494ab1996826c4f47f8ef0f63d ] The pointer isn't initialized by callers, but I have encountered cases where it's still printed; initialize it in all possible cases in setup_one_line(). Link: https://patch.msgid.link/20240703172235.ad863568b55f.Iaa1eba4db8265d7715ba71d5f6bb8c7ff63d27e9@changeid Acked-By: Anton Ivanov Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

um: Add winch to winch_handlers before registering winch IRQ

2024-04-22T20:15:27Z

Registering a winch IRQ is racy, an interrupt may occur before the winch is added to the winch_handlers list. If that happens, register_winch_irq() adds to that list a winch that is scheduled to be (or has already been) freed, causing a panic later in winch_cleanup(). Avoid the race by adding the winch to the winch_handlers list before registering the IRQ, and rolling back if um_request_irq() fails. Fixes: 42a359e31a0e ("uml: SIGIO support cleanup") Signed-off-by: Roberto Sassu Reviewed-by: Johannes Berg Signed-off-by: Richard Weinberger

Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-01-18T19:37:24Z

Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ...

um: Reap winch thread if it fails

2024-01-04T22:51:23Z

When the winch thread runs into an error condition, it would exit(1) and never be reaped until shutdown time. Change this to write a command byte which causes the driver to kill it, therefore reaping the child. Signed-off-by: Benjamin Berg Signed-off-by: Richard Weinberger

tty: um: convert to u8/__u8 and size_t

2023-12-08T11:02:38Z

Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. Note we use __u8 in the userspace files. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Richard Weinberger Cc: Anton Ivanov Cc: Johannes Berg Cc: linux-um@lists.infradead.org Link: https://lore.kernel.org/r/20231206073712.17776-27-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: make tty_operations::write()'s count size_t

2023-08-11T19:12:46Z

Unify with the rest of the code. Use size_t for counts and ssize_t for retval. Signed-off-by: "Jiri Slaby (SUSE)" Link: https://lore.kernel.org/r/20230810091510.13006-30-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: propagate u8 data to tty_operations::write()

2023-08-11T19:12:46Z

Data are now typed as u8. Propagate this change to tty_operations::write(). Signed-off-by: "Jiri Slaby (SUSE)" Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Geert Uytterhoeven Cc: Richard Weinberger Cc: Anton Ivanov Cc: Johannes Berg Cc: Chris Zankel Cc: Max Filippov Cc: Arnd Bergmann Cc: Vaibhav Gupta Cc: Jens Taprogge Cc: Karsten Keil Cc: Scott Branden Cc: Ulf Hansson Cc: "David S. Miller" Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Alexander Gordeev Cc: Christian Borntraeger Cc: Sven Schnelle Cc: David Lin Cc: Johan Hovold Cc: Alex Elder Cc: Laurentiu Tudor Cc: Jiri Kosina Cc: David Sterba Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Arnaud Pouliquen Cc: Oliver Neukum Cc: Mathias Nyman Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Link: https://lore.kernel.org/r/20230810091510.13006-28-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

um: line: Use separate IRQs per line

2022-05-27T07:03:41Z

Today, all possible serial lines (ssl*=) as well as all possible consoles (con*=) each share a single interrupt (with a fixed number) with others of the same type. Now, if you have two lines, say ssl0 and ssl1, and one of them is connected to an fd you cannot read (e.g. a file), but the other gets a read interrupt, then both of them get the interrupt since it's shared. Then, the read() call will return EOF, since it's a file being written and there's nothing to read (at least not at the current offset, at the end). Unfortunately, this is treated as a read error, and we close this line, losing all the possible output. It might be possible to work around this and make the IRQ sharing work, however, now that we have dynamically allocated IRQs that are easy to use, simply use that to achieve separating between the events; then there's no interrupt for that line and we never attempt the read in the first place, thus not closing the line. This manifested itself in the wifi hostap/hwsim tests where the parallel script communicates via one serial console and the kernel messages go to another (a file) and sending data on the communication console caused the kernel messages to stop flowing into the file. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg Acked-By: anton ivanov Signed-off-by: Richard Weinberger

tty: drop put_tty_driver

2021-07-27T10:17:21Z

put_tty_driver() is an alias for tty_driver_kref_put(). There is no need for two exported identical functions, therefore switch all users of old put_tty_driver() to new tty_driver_kref_put() and remove the former for good. Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Geert Uytterhoeven Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Cc: Chris Zankel Cc: Max Filippov Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Cc: Samuel Iglesias Gonsalvez Cc: Jens Taprogge Cc: Karsten Keil Cc: Scott Branden Cc: Ulf Hansson Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: David Lin Cc: Johan Hovold Cc: Alex Elder Cc: Jiri Slaby Cc: Laurentiu Tudor Cc: Jiri Kosina Cc: David Sterba Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Oliver Neukum Cc: Felipe Balbi Cc: Mathias Nyman Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Acked-by: Alex Elder Acked-by: Christian Borntraeger Acked-by: Max Filippov Acked-by: David Sterba Acked-by: Samuel Iglesias Gonsálvez Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210723074317.32690-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty: stop using alloc_tty_driver

2021-07-27T10:17:20Z

alloc_tty_driver was deprecated by tty_alloc_driver in commit 7f0bc6a68ed9 (TTY: pass flags to alloc_tty_driver) in 2012. I never got into eliminating alloc_tty_driver until now. So we still have two functions for allocating drivers which might be confusing. So get rid of alloc_tty_driver uses to eliminate it for good in the next patch. Note we need to switch return value checking as tty_alloc_driver uses ERR_PTR. And flags are now a parameter of tty_alloc_driver. Cc: Richard Henderson (odd fixer:ALPHA PORT) Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Geert Uytterhoeven Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Cc: Chris Zankel Cc: Max Filippov Cc: Samuel Iglesias Gonsalvez Cc: Jens Taprogge Cc: Karsten Keil Cc: Ulf Hansson Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: Laurentiu Tudor Cc: Jiri Kosina Cc: David Sterba Cc: Shawn Guo Cc: Sascha Hauer Cc: Oliver Neukum Cc: Felipe Balbi Cc: Johan Hovold Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Acked-by: Samuel Iglesias Gonsálvez Acked-by: Max Filippov Acked-by: David Sterba Acked-by: Christian Borntraeger Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210723074317.32690-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman