kernel/arch/s390/include, branch master

s390/stackleak: Fix __stackleak_poison() inline assembly constraint

2026-03-03T15:42:14Z

The __stackleak_poison() inline assembly comes with a "count" operand where the "d" constraint is used. "count" is used with the exrl instruction and "d" means that the compiler may allocate any register from 0 to 15. If the compiler would allocate register 0 then the exrl instruction would not or the value of "count" into the executed instruction - resulting in a stackframe which is only partially poisoned. Use the correct "a" constraint, which excludes register 0 from register allocation. Fixes: 2a405f6bb3a5 ("s390/stackleak: provide fast __stackleak_poison() implementation") Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Reviewed-by: Vasily Gorbik Link: https://lore.kernel.org/r/20260302133500.1560531-4-hca@linux.ibm.com Signed-off-by: Vasily Gorbik

s390/idle: Remove psw_idle() prototype

2026-02-25T15:46:07Z

psw_idle() does not exist anymore. Remove its prototype. Reviewed-by: Sven Schnelle Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/idle: Inline update_timer_idle()

2026-02-25T15:46:07Z

Inline update_timer_idle() again to avoid an extra function call. This way the generated code is close to old assembler version again. Reviewed-by: Sven Schnelle Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/idle: Fix cpu idle exit cpu time accounting

2026-02-25T15:46:07Z

With the conversion to generic entry [1] cpu idle exit cpu time accounting was converted from assembly to C. This introduced an reversed order of cpu time accounting. On cpu idle exit the current accounting happens with the following call chain: -> do_io_irq()/do_ext_irq() -> irq_enter_rcu() -> account_hardirq_enter() -> vtime_account_irq() -> vtime_account_kernel() vtime_account_kernel() accounts the passed cpu time since last_update_timer as system time, and updates last_update_timer to the current cpu timer value. However the subsequent call of -> account_idle_time_irq() will incorrectly subtract passed cpu time from timer_idle_enter to the updated last_update_timer value from system_timer. Then last_update_timer is updated to a sys_enter_timer, which means that last_update_timer goes back in time. Subsequently account_hardirq_exit() will account too much cpu time as hardirq time. The sum of all accounted cpu times is still correct, however some cpu time which was previously accounted as system time is now accounted as hardirq time, plus there is the oddity that last_update_timer goes back in time. Restore previous behavior by extracting cpu time accounting code from account_idle_time_irq() into a new update_timer_idle() function and call it before irq_enter_rcu(). Fixes: 56e62a737028 ("s390: convert to generic entry") [1] Reviewed-by: Sven Schnelle Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51Z

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28Z

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook

Merge tag 's390-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2026-02-20T17:24:45Z

Pull s390 fixes from Heiko Carstens: - Make KEXEC_SIG available again for CONFIG_MODULES=n - The s390 topology code used to call rebuild_sched_domains() before common code scheduling domains were setup. This was silently ignored by common code, but now results in a warning. Address by avoiding the early call - Convert debug area lock from spinlock to raw spinlock to address lockdep warnings - The recent 3490 tape device driver rework resulted in a different device driver name, which is visible via sysfs for user space. This breaks at least one user space application. Change the device driver name back to its old name to fix this * tag 's390-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/tape: Fix device driver name s390/debug: Convert debug area lock from a spinlock to a raw spinlock s390/smp: Avoid calling rebuild_sched_domains() early s390/kexec: Make KEXEC_SIG available when CONFIG_MODULES=n

s390/debug: Convert debug area lock from a spinlock to a raw spinlock

2026-02-18T14:22:59Z

With PREEMPT_RT as potential configuration option, spinlock_t is now considered as a sleeping lock, and thus might cause issues when used in an atomic context. But even with PREEMPT_RT as potential configuration option, raw_spinlock_t remains as a true spinning lock/atomic context. This creates potential issues with the s390 debug/tracing feature. The functions to trace errors are called in various contexts, including under lock of raw_spinlock_t, and thus the used spinlock_t in each debug area is in violation of the locking semantics. Here are two examples involving failing PCI Read accesses that are traced while holding `pci_lock` in `drivers/pci/access.c`: ============================= [ BUG: Invalid wait context ] 6.19.0-devel #18 Not tainted ----------------------------- bash/3833 is trying to lock: 0000027790baee30 (&rc->lock){-.-.}-{3:3}, at: debug_event_common+0xfc/0x300 other info that might help us debug this: context-{5:5} 5 locks held by bash/3833: #0: 0000027efbb29450 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x7c/0xf0 #1: 00000277f0504a90 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x13e/0x260 #2: 00000277beed8c18 (kn->active#339){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x164/0x260 #3: 00000277e9859190 (&dev->mutex){....}-{4:4}, at: pci_dev_lock+0x2e/0x40 #4: 00000383068a7708 (pci_lock){....}-{2:2}, at: pci_bus_read_config_dword+0x4a/0xb0 stack backtrace: CPU: 6 UID: 0 PID: 3833 Comm: bash Kdump: loaded Not tainted 6.19.0-devel #18 PREEMPTLAZY Hardware name: IBM 9175 ME1 701 (LPAR) Call Trace: [<00000383048afec2>] dump_stack_lvl+0xa2/0xe8 [<00000383049ba166>] __lock_acquire+0x816/0x1660 [<00000383049bb1fa>] lock_acquire+0x24a/0x370 [<00000383059e3860>] _raw_spin_lock_irqsave+0x70/0xc0 [<00000383048bbb6c>] debug_event_common+0xfc/0x300 [<0000038304900b0a>] __zpci_load+0x17a/0x1f0 [<00000383048fad88>] pci_read+0x88/0xd0 [<00000383054cbce0>] pci_bus_read_config_dword+0x70/0xb0 [<00000383054d55e4>] pci_dev_wait+0x174/0x290 [<00000383054d5a3e>] __pci_reset_function_locked+0xfe/0x170 [<00000383054d9b30>] pci_reset_function+0xd0/0x100 [<00000383054ee21a>] reset_store+0x5a/0x80 [<0000038304e98758>] kernfs_fop_write_iter+0x1e8/0x260 [<0000038304d995da>] new_sync_write+0x13a/0x180 [<0000038304d9c5d0>] vfs_write+0x200/0x330 [<0000038304d9c88c>] ksys_write+0x7c/0xf0 [<00000383059cfa80>] __do_syscall+0x210/0x500 [<00000383059e4c06>] system_call+0x6e/0x90 INFO: lockdep is turned off. ============================= [ BUG: Invalid wait context ] 6.19.0-devel #3 Not tainted ----------------------------- bash/6861 is trying to lock: 0000009da05c7430 (&rc->lock){-.-.}-{3:3}, at: debug_event_common+0xfc/0x300 other info that might help us debug this: context-{5:5} 5 locks held by bash/6861: #0: 000000acff404450 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x7c/0xf0 #1: 000000acff41c490 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x13e/0x260 #2: 0000009da36937d8 (kn->active#75){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x164/0x260 #3: 0000009dd15250d0 (&zdev->state_lock){+.+.}-{4:4}, at: enable_slot+0x2e/0xc0 #4: 000001a19682f708 (pci_lock){....}-{2:2}, at: pci_bus_read_config_byte+0x42/0xa0 stack backtrace: CPU: 16 UID: 0 PID: 6861 Comm: bash Kdump: loaded Not tainted 6.19.0-devel #3 PREEMPTLAZY Hardware name: IBM 9175 ME1 701 (LPAR) Call Trace: [<000001a194837ec2>] dump_stack_lvl+0xa2/0xe8 [<000001a194942166>] __lock_acquire+0x816/0x1660 [<000001a1949431fa>] lock_acquire+0x24a/0x370 [<000001a19596b810>] _raw_spin_lock_irqsave+0x70/0xc0 [<000001a194843b6c>] debug_event_common+0xfc/0x300 [<000001a194888b0a>] __zpci_load+0x17a/0x1f0 [<000001a194882d88>] pci_read+0x88/0xd0 [<000001a195453b88>] pci_bus_read_config_byte+0x68/0xa0 [<000001a195457bc2>] pci_setup_device+0x62/0xad0 [<000001a195458e70>] pci_scan_single_device+0x90/0xe0 [<000001a19488a0f6>] zpci_bus_scan_device+0x46/0x80 [<000001a19547f958>] enable_slot+0x98/0xc0 [<000001a19547f134>] power_write_file+0xc4/0x110 [<000001a194e20758>] kernfs_fop_write_iter+0x1e8/0x260 [<000001a194d215da>] new_sync_write+0x13a/0x180 [<000001a194d245d0>] vfs_write+0x200/0x330 [<000001a194d2488c>] ksys_write+0x7c/0xf0 [<000001a195957a30>] __do_syscall+0x210/0x500 [<000001a19596cbb6>] system_call+0x6e/0x90 INFO: lockdep is turned off. Since it is desired to keep it possible to create trace records in most situations, including this particular case (failing PCI config space accesses are relevant), convert the used spinlock_t in `struct debug_info` to raw_spinlock_t. The impact is small, as the debug area lock only protects bounded memory access without external dependencies, apart from one function debug_set_size() where kfree() is implicitly called with the lock held. Move debug_info_free() out of this lock, to keep remove this external dependency. Acked-by: Heiko Carstens Signed-off-by: Benjamin Block Signed-off-by: Heiko Carstens

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2026-02-13T19:31:15Z

Pull KVM updates from Paolo Bonzini: "Loongarch: - Add more CPUCFG mask bits - Improve feature detection - Add lazy load support for FPU and binary translation (LBT) register state - Fix return value for memory reads from and writes to in-kernel devices - Add support for detecting preemption from within a guest - Add KVM steal time test case to tools/selftests ARM: - Add support for FEAT_IDST, allowing ID registers that are not implemented to be reported as a normal trap rather than as an UNDEF exception - Add sanitisation of the VTCR_EL2 register, fixing a number of UXN/PXN/XN bugs in the process - Full handling of RESx bits, instead of only RES0, and resulting in SCTLR_EL2 being added to the list of sanitised registers - More pKVM fixes for features that are not supposed to be exposed to guests - Make sure that MTE being disabled on the pKVM host doesn't give it the ability to attack the hypervisor - Allow pKVM's host stage-2 mappings to use the Force Write Back version of the memory attributes by using the "pass-through' encoding - Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the guest - Preliminary work for guest GICv5 support - A bunch of debugfs fixes, removing pointless custom iterators stored in guest data structures - A small set of FPSIMD cleanups - Selftest fixes addressing the incorrect alignment of page allocation - Other assorted low-impact fixes and spelling fixes RISC-V: - Fixes for issues discoverd by KVM API fuzzing in kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and kvm_riscv_vcpu_aia_imsic_update() - Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM - Transparent huge page support for hypervisor page tables - Adjust the number of available guest irq files based on MMIO register sizes found in the device tree or the ACPI tables - Add RISC-V specific paging modes to KVM selftests - Detect paging mode at runtime for selftests s390: - Performance improvement for vSIE (aka nested virtualization) - Completely new memory management. s390 was a special snowflake that enlisted help from the architecture's page table management to build hypervisor page tables, in particular enabling sharing the last level of page tables. This however was a lot of code (~3K lines) in order to support KVM, and also blocked several features. The biggest advantages is that the page size of userspace is completely independent of the page size used by the guest: userspace can mix normal pages, THPs and hugetlbfs as it sees fit, and in fact transparent hugepages were not possible before. It's also now possible to have nested guests and guests with huge pages running on the same host - Maintainership change for s390 vfio-pci - Small quality of life improvement for protected guests x86: - Add support for giving the guest full ownership of PMU hardware (contexted switched around the fastpath run loop) and allowing direct access to data MSRs and PMCs (restricted by the vPMU model). KVM still intercepts access to control registers, e.g. to enforce event filtering and to prevent the guest from profiling sensitive host state. This is more accurate, since it has no risk of contention and thus dropped events, and also has significantly less overhead. For more information, see the commit message for merge commit bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...") - Disallow changing the virtual CPU model if L2 is active, for all the same reasons KVM disallows change the model after the first KVM_RUN - Fix a bug where KVM would incorrectly reject host accesses to PV MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled, even if those were advertised as supported to userspace, - Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs, where KVM would attempt to read CR3 configuring an async #PF entry - Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM (for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL. Only a few exports that are intended for external usage, and those are allowed explicitly - When checking nested events after a vCPU is unblocked, ignore -EBUSY instead of WARNing. Userspace can sometimes put the vCPU into what should be an impossible state, and spurious exit to userspace on -EBUSY does not really do anything to solve the issue - Also throw in the towel and drop the WARN on INIT/SIPI being blocked when vCPU is in Wait-For-SIPI, which also resulted in playing whack-a-mole with syzkaller stuffing architecturally impossible states into KVM - Add support for new Intel instructions that don't require anything beyond enumerating feature flags to userspace - Grab SRCU when reading PDPTRs in KVM_GET_SREGS2 - Add WARNs to guard against modifying KVM's CPU caps outside of the intended setup flow, as nested VMX in particular is sensitive to unexpected changes in KVM's golden configuration - Add a quirk to allow userspace to opt-in to actually suppress EOI broadcasts when the suppression feature is enabled by the guest (currently limited to split IRQCHIP, i.e. userspace I/O APIC). Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an option as some userspaces have come to rely on KVM's buggy behavior (KVM advertises Supress EOI Broadcast irrespective of whether or not userspace I/O APIC supports Directed EOIs) - Clean up KVM's handling of marking mapped vCPU pages dirty - Drop a pile of *ancient* sanity checks hidden behind in KVM's unused ASSERT() macro, most of which could be trivially triggered by the guest and/or user, and all of which were useless - Fold "struct dest_map" into its sole user, "struct rtc_status", to make it more obvious what the weird parameter is used for, and to allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n - Bury all of ioapic.h, i8254.h and related ioctls (including KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y - Add a regression test for recent APICv update fixes - Handle "hardware APIC ISR", a.k.a. SVI, updates in kvm_apic_update_apicv() to consolidate the updates, and to co-locate SVI updates with the updates for KVM's own cache of ISR information - Drop a dead function declaration - Minor cleanups x86 (Intel): - Rework KVM's handling of VMCS updates while L2 is active to temporarily switch to vmcs01 instead of deferring the update until the next nested VM-Exit. The deferred updates approach directly contributed to several bugs, was proving to be a maintenance burden due to the difficulty in auditing the correctness of deferred updates, and was polluting "struct nested_vmx" with a growing pile of booleans - Fix an SGX bug where KVM would incorrectly try to handle EPCM page faults, and instead always reflect them into the guest. Since KVM doesn't shadow EPCM entries, EPCM violations cannot be due to KVM interference and can't be resolved by KVM - Fix a bug where KVM would register its posted interrupt wakeup handler even if loading kvm-intel.ko ultimately failed - Disallow access to vmcb12 fields that aren't fully supported, mostly to avoid weirdness and complexity for FRED and other features, where KVM wants enable VMCS shadowing for fields that conditionally exist - Print out the "bad" offsets and values if kvm-intel.ko refuses to load (or refuses to online a CPU) due to a VMCS config mismatch x86 (AMD): - Drop a user-triggerable WARN on nested_svm_load_cr3() failure - Add support for virtualizing ERAPS. Note, correct virtualization of ERAPS relies on an upcoming, publicly announced change in the APM to reduce the set of conditions where hardware (i.e. KVM) *must* flush the RAP - Ignore nSVM intercepts for instructions that are not supported according to L1's virtual CPU model - Add support for expedited writes to the fast MMIO bus, a la VMX's fastpath for EPT Misconfig - Don't set GIF when clearing EFER.SVME, as GIF exists independently of SVM, and allow userspace to restore nested state with GIF=0 - Treat exit_code as an unsigned 64-bit value through all of KVM - Add support for fetching SNP certificates from userspace - Fix a bug where KVM would use vmcb02 instead of vmcb01 when emulating VMLOAD or VMSAVE on behalf of L2 - Misc fixes and cleanups x86 selftests: - Add a regression test for TPR<=>CR8 synchronization and IRQ masking - Overhaul selftest's MMU infrastructure to genericize stage-2 MMU support, and extend x86's infrastructure to support EPT and NPT (for L2 guests) - Extend several nested VMX tests to also cover nested SVM - Add a selftest for nested VMLOAD/VMSAVE - Rework the nested dirty log test, originally added as a regression test for PML where KVM logged L2 GPAs instead of L1 GPAs, to improve test coverage and to hopefully make the test easier to understand and maintain guest_memfd: - Remove kvm_gmem_populate()'s preparation tracking and half-baked hugepage handling. SEV/SNP was the only user of the tracking and it can do it via the RMP - Retroactively document and enforce (for SNP) that KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the source page to be 4KiB aligned, to avoid non-trivial complexity for something that no known VMM seems to be doing and to avoid an API special case for in-place conversion, which simply can't support unaligned sources - When populating guest_memfd memory, GUP the source page in common code and pass the refcounted page to the vendor callback, instead of letting vendor code do the heavy lifting. Doing so avoids a looming deadlock bug with in-place due an AB-BA conflict betwee mmap_lock and guest_memfd's filemap invalidate lock Generic: - Fix a bug where KVM would ignore the vCPU's selected address space when creating a vCPU-specific mapping of guest memory. Actually this bug could not be hit even on x86, the only architecture with multiple address spaces, but it's a bug nevertheless" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits) KVM: s390: Increase permitted SE header size to 1 MiB MAINTAINERS: Replace backup for s390 vfio-pci KVM: s390: vsie: Fix race in acquire_gmap_shadow() KVM: s390: vsie: Fix race in walk_guest_tables() KVM: s390: Use guest address to mark guest page dirty irqchip/riscv-imsic: Adjust the number of available guest irq files RISC-V: KVM: Transparent huge page support RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test RISC-V: KVM: Allow Zalasr extensions for Guest/VM KVM: riscv: selftests: Add riscv vm satp modes KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr() RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr() RISC-V: KVM: Remove unnecessary 'ret' assignment KVM: s390: Add explicit padding to struct kvm_s390_keyop KVM: LoongArch: selftests: Add steal time test case LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side LoongArch: KVM: Add paravirt preempt feature in hypervisor side ...

Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2026-02-12T20:13:01Z

Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ...