kernel/arch/s390/include/asm/setup.h, branch linux-5.1.y

s390/kasan: use noexec and large pages

2018-10-09T09:21:24Z

To lower memory footprint and speed up kasan initialisation detect EDAT availability and use large pages if possible. As we know how much memory is needed for initialisation, another simplistic large page allocator is introduced to avoid memory fragmentation. Since facilities list is retrieved anyhow, detect noexec support and adjust pages attributes. Handle noexec kernel option to avoid inconsistent kasan shadow memory pages flags. Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390/mem_detect: move tprot loop to early boot phase

2018-10-09T09:21:08Z

Move memory detection to early boot phase. To store online memory regions "struct mem_detect_info" has been introduced together with for_each_mem_detect_block iterator. mem_detect_info is later converted to memblock. Also introduces sclp_early_get_meminfo function to get maximum physical memory and maximum increment number. Reviewed-by: Heiko Carstens Reviewed-by: Martin Schwidefsky Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390/boot: block uncompressed vmlinux booting attempts

2018-07-02T09:25:05Z

Since the plain vmlinux ELF file no longer carries all necessary parts for starting up (like the entry point and decompressor), add a check which would block boot process and encourage users to use bzImage or arch/s390/boot/compressed/vmlinux instead. The check relies on s390 linux entry point ABI definition, which is only present in bzImage and arch/s390/boot/compressed/vmlinux. Reported-by: Guenter Roeck Tested-by: Guenter Roeck Acked-by: Cornelia Huck Acked-by: Christian Borntraeger Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390/setup: do not reserve the decompressor code

2018-06-25T08:14:41Z

Introduce PARMAREA_END, and use it for memblock reserve of low memory, which is used for lowcore, kdump data mover code and page buffer, early stack and parmarea. There is no need to reserve an area between PARMAREA_END and the decompressor _ehead. Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390/kexec_file: Prepare setup.h for kexec_file_load

2018-04-16T07:10:21Z

kexec_file_load needs to prepare the new kernels before they are loaded. For that it has to know the offsets in head.S, e.g. to register the new command line. Unfortunately there are no macros right now defining those offsets. Define them now. Signed-off-by: Philipp Rudo Signed-off-by: Martin Schwidefsky

s390/lpp: use assembler alternatives for the LPP instruction

2018-03-28T06:38:28Z

With the new macros for CPU alternatives the MACHINE_FLAG_LPP check around the LPP instruction can be optimized. After this is done the flag can be removed. Signed-off-by: Martin Schwidefsky

s390/cpum_sf: correctly set the PID and TID in perf samples

2017-11-16T14:06:17Z

The hardware sampler creates samples that are processed at a later point in time. The PID and TID values of the perf samples that are created for hardware samples are initialized with values from the current task. Hence, the PID and TID values are not correct and perf samples are associated with wrong processes. The PID and TID values are obtained from the Host Program Parameter (HPP) field in the basic-sampling data entries. These PIDs are valid in the init PID namespace. Ensure that the PIDs in the perf samples are resolved considering the PID namespace in which the perf event was created. To correct the PID and TID values in the created perf samples, a special overflow handler is installed. It replaces the default overflow handler and does not become effective if any other overflow handler is used. With the special overflow handler most of the perf samples are associated with the right processes. For processes, that are no longer exist, the association might still be wrong. Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2017-11-13T19:47:01Z

Pull s390 updates from Heiko Carstens: "Since Martin is on vacation you get the s390 pull request for the v4.15 merge window this time from me. Besides a lot of cleanups and bug fixes these are the most important changes: - a new regset for runtime instrumentation registers - hardware accelerated AES-GCM support for the aes_s390 module - support for the new CEX6S crypto cards - support for FORTIFY_SOURCE - addition of missing z13 and new z14 instructions to the in-kernel disassembler - generate opcode tables for the in-kernel disassembler out of a simple text file instead of having to manually maintain those tables - fast memset16, memset32 and memset64 implementations - removal of named saved segment support - hardware counter support for z14 - queued spinlocks and queued rwlocks implementations for s390 - use the stack_depth tracking feature for s390 BPF JIT - a new s390_sthyi system call which emulates the sthyi (store hypervisor information) instruction - removal of the old KVM virtio transport - an s390 specific CPU alternatives implementation which is used in the new spinlock code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits) MAINTAINERS: add virtio-ccw.h to virtio/s390 section s390/noexec: execute kexec datamover without DAT s390: fix transactional execution control register handling s390/bpf: take advantage of stack_depth tracking s390: simplify transactional execution elf hwcap handling s390/zcrypt: Rework struct ap_qact_ap_info. s390/virtio: remove unused header file kvm_virtio.h s390: avoid undefined behaviour s390/disassembler: generate opcode tables from text file s390/disassembler: remove insn_to_mnemonic() s390/dasd: avoid calling do_gettimeofday() s390: vfio-ccw: Do not attempt to free no-op, test and tic cda. s390: remove named saved segment support s390/archrandom: Reconsider s390 arch random implementation s390/pci: do not require AIS facility s390/qdio: sanitize put_indicator s390/qdio: use atomic_cmpxchg s390/nmi: avoid using long-displacement facility s390: pass endianness info to sparse s390/decompressor: remove informational messages ...

s390: remove named saved segment support

2017-11-08T08:47:54Z

Remove the support to create a z/VM named saved segment (NSS). This feature is not supported since quite a while in favour of jump labels, function tracing and (now) CPU alternatives. All of these features require to write to the kernel text section which is not possible if the kernel is contained within an NSS. Given that memory savings are minimal if kernel images are shared and in addition updates of shared images are painful, the NSS feature can be removed. Reviewed-by: Hendrik Brueckner Signed-off-by: Heiko Carstens

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman