kernel/arch/s390/include/asm/sections.h, branch linux-rolling-stable

s390/amode31: change type of samode31, eamode31, etc

2023-08-30T09:03:27Z

For consistencs reasons change the type of __samode31, __eamode31, __stext_amode31, and __etext_amode31 to a char pointer so they (nearly) match the type of all other sections. This allows for code simplifications with follow-on patches. Reviewed-by: Alexander Gordeev Signed-off-by: Heiko Carstens

s390: use generic version of arch_is_kernel_initmem_freed()

2021-11-06T20:30:38Z

The generic version of arch_is_kernel_initmem_freed() now does the same as s390 version. Remove the s390 version. Link: https://lkml.kernel.org/r/b6feb5dfe611a322de482762fc2df3a9eece70c7.1633001016.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy Acked-by: Heiko Carstens Cc: Gerald Schaefer Cc: Kefeng Wang Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

s390: rename dma section to amode31

2021-08-05T12:10:53Z

The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik Reviewed-by: Alexander Egorenkov Signed-off-by: Heiko Carstens

s390: correct bootdata / bootdata_preserved macros

2020-10-26T13:18:01Z

Currently s390 build is broken. SECTCMP .boot.data error: section .boot.data differs between vmlinux and arch/s390/boot/compressed/vmlinux make[2]: *** [arch/s390/boot/section_cmp.boot.data] Error 1 SECTCMP .boot.preserved.data error: section .boot.preserved.data differs between vmlinux and arch/s390/boot/compressed/vmlinux make[2]: *** [arch/s390/boot/section_cmp.boot.preserved.data] Error 1 make[1]: *** [bzImage] Error 2 Commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") converted all __section(foo) to __section("foo"). This is wrong for __bootdata / __bootdata_preserved macros which want variable names to be a part of intermediate section names .boot.data.and .boot.preserved.data.. Those sections are later sorted by alignment + name and merged together into final .boot.data / .boot.preserved.data sections. Those sections must be identical in the decompressor and the decompressed kernel (that is checked during the build). Fixes: 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") Signed-off-by: Vasily Gorbik Signed-off-by: Heiko Carstens

treewide: Convert macro and uses of section(foo) to section("foo")

2020-10-25T21:51:49Z

Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches Reviewed-by: Nick Desaulniers Reviewed-by: Miguel Ojeda Signed-off-by: Linus Torvalds

locking/lockdep: check for freed initmem in static_obj()

2019-04-29T08:47:10Z

The following warning occurred on s390: WARNING: CPU: 0 PID: 804 at kernel/locking/lockdep.c:1025 lockdep_register_key+0x30/0x150 This is because the check in static_obj() assumes that all memory within [_stext, _end] belongs to static objects, which at least for s390 isn't true. The init section is also part of this range, and freeing it allows the buddy allocator to allocate memory from it. We have virt == phys for the kernel on s390, so that such allocations would then have addresses within the range [_stext, _end]. To fix this, introduce arch_is_kernel_initmem_freed(), similar to arch_is_kernel_text/data(), and add it to the checks in static_obj(). This will always return 0 on architectures that do not define arch_is_kernel_initmem_freed. On s390, it will return 1 if initmem has been freed and the address is in the range [__init_begin, __init_end]. Signed-off-by: Gerald Schaefer Reviewed-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

s390/kernel: introduce .dma sections

2019-04-29T08:47:10Z

With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer Reviewed-by: Philipp Rudo Signed-off-by: Martin Schwidefsky

s390: introduce .boot.preserved.data section

2019-04-10T15:47:09Z

Introduce .boot.preserve.data section which is similar to .boot.data and "shared" between the decompressor code and the decompressed kernel. The decompressor will store values in it, and copy over to the decompressed image before starting it. This method allows to avoid using pre-defined addresses and other hacks to pass values between those boot phases. Unlike .boot.data section .boot.preserved.data is NOT a part of init data, and hence will be preserved for the kernel life time. Signed-off-by: Gerald Schaefer Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390: introduce .boot.data section

2018-10-09T09:21:06Z

Introduce .boot.data section which is "shared" between the decompressor code and the decompressed kernel. The decompressor will store values in it, and copy over to the decompressed image before starting it. This method allows to avoid using pre-defined addresses and other hacks to pass values between those boot phases. .boot.data section is a part of init data, and will be freed after kernel initialization is complete. For uncompressed kernel image, .boot.data section is basically the same as .init.data Reviewed-by: Martin Schwidefsky Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky

s390: remove unused _ehead symbol

2018-07-02T09:24:58Z

Since startup code now reserves memory ranges [0, PARMAREA_END] and [_stext, ] _ehead symbol is not used and could be cleaned up. Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky