kernel/arch/powerpc/sysdev/mpc8xx_pic.c, branch linux-6.2.y

powerpc/8xx: Move mpc8xx_pic.c from sysdev to platform/8xx

2017-08-10T13:32:07Z

mpc8xx_pic.c is dedicated to the 8xx, so move it to platform/8xx Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc/8xx: fix mpc8xx_get_irq() return on no irq

2017-06-02T09:20:44Z

IRQ 0 is a valid HW interrupt. So get_irq() shall return 0 when there is no irq, instead of returning irq_linear_revmap(... ,0) Fixes: f2a0bd3753dad ("[POWERPC] 8xx: powerpc port of core CPM PIC") Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc: Remove all usages of NO_IRQ

2016-09-20T10:57:12Z

NO_IRQ has been == 0 on powerpc for just over ten years (since commit 0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change platforms to use it")). It's also 0 on most other arches. Although it's fairly harmless, every now and then it causes confusion when a driver is built on powerpc and another arch which doesn't define NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least some of which are to work around that problem. So we'd like to remove it. This is fairly trivial in the arch code, we just convert: if (irq == NO_IRQ) to if (!irq) if (irq != NO_IRQ) to if (irq) irq = NO_IRQ; to irq = 0; return NO_IRQ; to return 0; And a few other odd cases as well. At least for now we keep the #define NO_IRQ, because there is driver code that uses NO_IRQ and the fixes to remove those will go via other trees. Note we also change some occurrences in PPC sound drivers, drivers/ps3, and drivers/macintosh. Signed-off-by: Michael Ellerman

powerpc/8xx: Shorten irq_chip name for the SIU

2015-10-06T10:54:42Z

show_interrupts() expects the irq_chip name to be max 8 characters otherwise everything get misaligned # cat /proc/interrupts CPU0 17: 0 CPM PIC 0 Level error 19: 0 MPC8XX SIU 15 Level tbint 20: 90 CPM PIC 4 Level cpm_uart 38: 29746 MPC8XX SIU 5 Level fs_enet-mac 39: 0 MPC8XX SIU 7 Level fs_enet-mac 47: 401 CPM PIC 5 Level fsl_spi 68: 1 MPC8XX SIU 2 Level phy_interrupt, phy_interrupt, phy_interrupt LOC: 7225485 Local timer interrupts for timer event device LOC: 9 Local timer interrupts for others SPU: 0 Spurious interrupts PMI: 0 Performance monitoring interrupts MCE: 0 Machine check exceptions Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc/mpc8xx: Use irq_set_handler_locked()

2015-09-16T13:43:11Z

Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle: @@ struct irq_data *d; expression E1; @@ -__irq_set_handler_locked(d->irq, E1); +irq_set_handler_locked(d, E1); Signed-off-by: Thomas Gleixner Cc: Jiang Liu Cc: Julia Lawall Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: linuxppc-dev@lists.ozlabs.org

powerpc: Constify irq_domain_ops

2015-05-11T06:58:20Z

The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Michael Ellerman

powerpc: Delete non-required instances of include

2014-01-15T02:46:44Z

None of these files are actually using any __init type directives and hence don't need to include . Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. The one instance where we add an include for init.h covers off a case where that file was implicitly getting it from another header which itself didn't need it. Signed-off-by: Paul Gortmaker Signed-off-by: Benjamin Herrenschmidt

powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller

2012-04-30T00:45:25Z

The mpc8xx driver uses a reference to NR_IRQS that is buggy. It uses NR_IRQs for the array size of the ppc_cached_irq_mask bitmap, but NR_IRQs could be smaller than the number of hardware irqs that ppc_cached_irq_mask tracks. Also, while fixing that problem, it became apparent that the interrupt controller only supports 32 interrupt numbers, but it is written as if it supports multiple register banks which is more complicated. This patch pulls out the buggy reference to NR_IRQs and fixes the size of the ppc_cached_irq_mask to match the number of HW irqs. It also drops the now-unnecessary code since ppc_cached_irq_mask is no longer an array. Signed-off-by: Grant Likely Signed-off-by: Benjamin Herrenschmidt

irq_domain: Replace irq_alloc_host() with revmap-specific initializers

2012-02-16T13:11:22Z

Each revmap type has different arguments for setting up the revmap. This patch splits up the generator functions so that each revmap type can do its own setup and the user doesn't need to keep track of how each revmap type handles the arguments. This patch also adds a host_data argument to the generators. There are cases where the host_data pointer will be needed before the function returns. ie. the legacy map calls the .map callback for each irq before returning. v2: - Add void *host_data argument to irq_domain_add_*() functions - fixed failure to compile - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c Signed-off-by: Grant Likely Cc: Rob Herring Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller Tested-by: Olof Johansson

irq_domain/powerpc: Use common irq_domain structure instead of irq_host

2012-02-14T21:06:50Z

This patch drops the powerpc-specific irq_host structures and uses the common irq_domain strucutres defined in linux/irqdomain.h. It also fixes all the users to use the new structure names. Renaming irq_host to irq_domain has been discussed for a long time, and this patch is a step in the process of generalizing the powerpc virq code to be usable by all architecture. An astute reader will notice that this patch actually removes the irq_host structure instead of renaming it. This is because the irq_domain structure already exists in include/linux/irqdomain.h and has the needed data members. Signed-off-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller Tested-by: Olof Johansson