kernel/arch/powerpc/purgatory, branch linux-6.2.y

powerpc/purgatory: Omit use of bin2c

2022-07-27T11:36:03Z

The .incbin assembler directive is much faster than bin2c + $(CC). Do similar refactoring as in commit 4c0f032d4963 ("s390/purgatory: Omit use of bin2c"). Please note the .quad directive matches to size_t in C (both 8 byte) because the purgatory is compiled only for the 64-bit kernel. (KEXEC_FILE depends on PPC64). Signed-off-by: Masahiro Yamada Reviewed-by: Segher Boessenkool Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220725015619.618070-1-masahiroy@kernel.org

powerpc/kexec: Don't use .machine ppc64 in trampoline_64.S

2021-04-08T11:17:43Z

As best as I can tell the ".machine" directive in trampoline_64.S is no longer, or never was, necessary. It was added in commit 0d97631392c2 ("powerpc: Add purgatory for kexec_file_load() implementation."), which created the file based on the kexec-tools purgatory. It may be/have-been necessary in the kexec-tools version, but we have a completely different build system, and we already pass the desired CPU flags, eg: gcc ... -m64 -Wl,-a64 -mabi=elfv2 -Wa,-maltivec -Wa,-mpower4 -Wa,-many ... arch/powerpc/purgatory/trampoline_64.S So drop the ".machine" directive and rely on the assembler flags. Reported-by: Daniel Axtens Signed-off-by: Michael Ellerman Reviewed-by: Segher Boessenkool Link: https://lore.kernel.org/r/20210315034159.315675-1-mpe@ellerman.id.au

powerpc/kexec_file: Enable early kernel OPAL calls

2020-07-29T13:47:55Z

Kernels built with CONFIG_PPC_EARLY_DEBUG_OPAL enabled expects r8 & r9 to be filled with OPAL base & entry addresses respectively. Setting these registers allows the kernel to perform OPAL calls before the device tree is parsed. Signed-off-by: Hari Bathini Reviewed-by: Thiago Jung Bauermann Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/159602303975.575379.5032301944162937479.stgit@hbathini

powerpc/kexec_file: Setup backup region for kdump kernel

2020-07-29T13:47:54Z

Though kdump kernel boots from loaded address, the first 64KB of it is copied down to real 0. So, setup a backup region and let purgatory copy the first 64KB of crashed kernel into this backup region before booting into kdump kernel. Update reserve map with backup region and crashed kernel's memory to avoid kdump kernel from accidentially using that memory. Signed-off-by: Hari Bathini Reviewed-by: Thiago Jung Bauermann Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/159602294718.575379.16216507537038008623.stgit@hbathini

powerpc/kexec_file: Mark PPC64 specific code

2020-07-29T13:47:53Z

Some of the kexec_file_load code isn't PPC64 specific. Move PPC64 specific code from kexec/file_load.c to kexec/file_load_64.c. Also, rename purgatory/trampoline.S to purgatory/trampoline_64.S in the same spirit. No functional changes. Signed-off-by: Hari Bathini Tested-by: Pingfan Liu Reviewed-by: Laurent Dufour Reviewed-by: Thiago Jung Bauermann Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/159602276920.575379.10390965946438306388.stgit@hbathini

.gitignore: add SPDX License Identifier

2020-03-25T10:50:48Z

Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441

2019-06-05T15:37:17Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Armijn Hemel Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman

powerpc: disable KASAN instrumentation on early/critical files.

2019-05-02T15:20:26Z

All files containing functions run before kasan_early_init() is called must have KASAN instrumentation disabled. For those file, branch profiling also have to be disabled otherwise each if () generates a call to ftrace_likely_update(). Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

Merge tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2018-08-17T18:32:50Z

Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...

powerpc: move ASM_CONST and stringify_in_c() into asm-const.h

2018-07-30T12:48:16Z

This patch moves ASM_CONST() and stringify_in_c() into dedicated asm-const.h, then cleans all related inclusions. Signed-off-by: Christophe Leroy [mpe: asm-compat.h should include asm-const.h] Signed-off-by: Michael Ellerman