kernel/arch/powerpc/platforms/pseries/pci.c, branch linux-6.2.y

powerpc: Remove asm/prom.h from all files that don't need it

2022-05-08T12:15:04Z

Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu

powerpc/powernv: remove the nvlink support

2021-05-02T13:35:32Z

This code was only used by the vfio-nvlink2 code, which itself had no proper use. Drop this huge chunk of code build into every powernv or generic build. Signed-off-by: Christoph Hellwig Acked-by: Greg Kroah-Hartman Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210326061311.1497642-3-hch@lst.de

powerpc/pcidn: Make IOV setup routines static

2021-01-30T00:39:31Z

These are only used locally. It fixes these W=1 compile errors : ../arch/powerpc/platforms/pseries/pci.c:58:5: error: no previous prototype for ‘pseries_send_map_pe’ [-Werror=missing-prototypes] 58 | int pseries_send_map_pe(struct pci_dev *pdev, | ^~~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/pci.c:91:6: error: no previous prototype for ‘pseries_set_pe_num’ [-Werror=missing-prototypes] 91 | void pseries_set_pe_num(struct pci_dev *pdev, u16 vf_index, __be16 pe_num) | ^~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/pci.c:105:5: error: no previous prototype for ‘pseries_associate_pes’ [-Werror=missing-prototypes] 105 | int pseries_associate_pes(struct pci_dev *pdev, u16 num_vfs) | ^~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/pci.c:149:5: error: no previous prototype for ‘pseries_pci_sriov_enable’ [-Werror=missing-prototypes] 149 | int pseries_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs) | ^~~~~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/pci.c:192:5: error: no previous prototype for ‘pseries_pcibios_sriov_enable’ [-Werror=missing-prototypes] 192 | int pseries_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../arch/powerpc/platforms/pseries/pci.c:199:5: error: no previous prototype for ‘pseries_pcibios_sriov_disable’ [-Werror=missing-prototypes] 199 | int pseries_pcibios_sriov_disable(struct pci_dev *pdev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Cédric Le Goater Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210104143206.695198-23-clg@kaod.org

powerpc/pseries: Define PCI bus speed for Gen4 and Gen5

2020-12-03T14:01:20Z

Update bus speed definition for PCI Gen4 and 5. Signed-off-by: Frederic Barrat Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201130152949.26467-1-fbarrat@linux.ibm.com

powerpc/pcidn: Make VF pci_dn management CONFIG_PCI_IOV specific

2020-01-23T10:31:19Z

The powerpc PCI code requires that a pci_dn structure exists for all devices in the system. This is fine for real devices since at boot a pci_dn is created for each PCI device in the DT and it's fine for hotplugged devices since the hotplug slot driver will manage the pci_dn's devices in hotplug slots. For SR-IOV, we need the platform / pcibios to manage the pci_dn for virtual functions since firmware is unaware of VFs, and they aren't "hot plugged" in the traditional sense. Management of the pci_dn is handled by the, poorly named, functions: add_pci_dev_data() and remove_pci_dev_data(). The entire body of these functions is #ifdef`ed around CONFIG_PCI_IOV and they cannot be used in any other context, so make them only available when CONFIG_PCI_IOV is selected, and rename them to reflect their actual usage rather than having them masquerade as generic code. Signed-off-by: Oliver O'Halloran Reviewed-by: Sam Bobroff Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190821062655.19735-2-oohall@gmail.com

powerpc/eeh: Refactor around eeh_probe_devices()

2019-08-22T13:12:46Z

Now that EEH support for all devices (on PowerNV and pSeries) is provided by the pcibios bus add device hooks, eeh_probe_devices() and eeh_addr_cache_build() are redundant and can be removed. Move the EEH enabled message into it's own function so that it can be called from multiple places. Note that previously on pSeries, useless EEH sysfs files were created for some devices that did not have EEH support and this change prevents them from being created. Signed-off-by: Sam Bobroff Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/33b0a6339d5ac88693de092d6fba984f2a5add66.1565930772.git.sbobroff@linux.ibm.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: Fix build break due to pnv_npu2_init()

2019-01-15T10:27:47Z

Commit 3be2df00e299 ("powerpc/pseries/npu: Enable platform support") added a call to pnv_npu2_init() in pseries code. This causes a build break if we build with CONFIG_PPC_PSERIES && !CONFIG_PPC_POWERNV: powerpc64le-pc-linux-gnu-ld: arch/powerpc/platforms/pseries/pci.o: in function `pSeries_final_fixup': pci.c:(.init.text+0x1b0): undefined reference to `pnv_npu2_init' This commit therefore wraps that line in an ifdef, so that pseries builds without powernv. Fixes: 3be2df00e299 ("powerpc/pseries/npu: Enable platform support") Signed-off-by: Jason A. Donenfeld Reviewed-by: Alexey Kardashevskiy [mpe: Frob change log a bit to blame a different commit] Signed-off-by: Michael Ellerman

powerpc/pseries/npu: Enable platform support

2018-12-21T05:20:46Z

We already changed NPU API for GPUs to not to call OPAL and the remaining bit is initializing NPU structures. This searches for POWER9 NVLinks attached to any device on a PHB and initializes an NPU structure if any found. Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman

powerpc/eeh: Cleanup EEH_POSTPONED_PROBE

2018-10-13T11:21:25Z

Currently a flag, EEH_POSTPONED_PROBE, is used to prevent an incorrect message "EEH: No capable adapters found" from being displayed during the boot of powernv systems. It is necessary because, on powernv, the call to eeh_probe_devices() made from eeh_init() is too early and EEH can't yet be enabled. A second call is made later from eeh_pnv_post_init(), which succeeds. (On pseries, the first call succeeds because PCI devices are set up early enough and no second call is made.) This can be simplified by moving the early call to eeh_probe_devices() from eeh_init() (where it's seen by both platforms) to pSeries_final_fixup(), so that each platform only calls eeh_probe_devices() once, at a point where it can succeed. This is slightly later in the boot sequence, but but still early enough and it is now in the same place in the sequence for both platforms (the pcibios_fixup hook). The display of the message can be cleaned up as well, by moving it into eeh_probe_devices(). Signed-off-by: Sam Bobroff Signed-off-by: Michael Ellerman