kernel/arch/powerpc/platforms/pseries/mobility.c, branch linux-4.3.y

Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

2015-04-16T18:53:32Z

Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile

powerpc/pseries: Simplify check for suspendability during suspend/migration

2015-03-28T01:20:39Z

During suspend/migration operation we must wait for the VASI state reported by the hypervisor to become Suspending prior to making the ibm,suspend-me RTAS call. Calling routines to rtas_ibm_supend_me() pass a vasi_state variable that exposes the VASI state to the caller. This is unnecessary as the caller only really cares about the following three conditions; if there is an error we should bailout, success indicating we have suspended and woken back up so proceed to device tree update, or we are not suspendable yet so try calling rtas_ibm_suspend_me again shortly. This patch removes the extraneous vasi_state variable and simply uses the return code to communicate how to proceed. We either succeed, fail, or get -EAGAIN in which case we sleep for a second before trying to call rtas_ibm_suspend_me again. The behaviour of ppc_rtas() remains the same, but migrate_store() now returns the propogated error code on failure. Previously -1 was returned from migrate_store() in the failure case which equates to -EPERM and was clearly wrong. Signed-off-by: Tyrel Datwyler Cc: Nathan Fontenont Cc: Cyril Bur Signed-off-by: Michael Ellerman

powerpc/pseries: Introduce api_version to migration sysfs interface

2015-03-24T00:23:11Z

The /sys/kernel/mobility/migration interface was added all the way back in 2.6.37. However, the drmgr userspace tool was never augmented to use this interface to perfrom migrations. Instead it has continued using a faux rtas call coupled with performing the device tree update processing in userspace and communicating it back to the kernel via the ugly /proc/ppc64/ofdt interface. Up until 3.12 the device tree update code in the kernel was badly broken and bit rotting. This code was fixed in 3.12 and is now utilized by the kernel suspend code as of 3.15. The kernel is now better suited to handle the post-mobility fixup of the device tree and drmgr should be transitioned to using the sysfs migration interface. This patch introduces the api_version sysfs file to /sys/kernel/mobility as a means for drmgr to query the current implementation level of the kernel migration code. This initial versioning indicates it is capable of perfroming all current PAPR requirements for migration including the post-mobility firmware activation and device tree update. Signed-off-by: Tyrel Datwyler Cc: Nathan Fontenot Cc: Cyril Bur Signed-off-by: Michael Ellerman

powerpc/pseries: Little endian fixes for post mobility device tree update

2015-03-20T03:53:01Z

We currently use the device tree update code in the kernel after resuming from a suspend operation to re-sync the kernels view of the device tree with that of the hypervisor. The code as it stands is not endian safe as it relies on parsing buffers returned by RTAS calls that thusly contains data in big endian format. This patch annotates variables and structure members with __be types as well as performing necessary byte swaps to cpu endian for data that needs to be parsed. Signed-off-by: Tyrel Datwyler Cc: Nathan Fontenot Cc: Cyril Bur Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman

powerpc/pseries: Fix endian problems with LE migration

2015-01-27T03:03:53Z

RTAS events require arguments be passed in big endian while hypercalls have their arguments passed in registers and the values should therefore be in CPU endian. The "ibm,suspend_me" 'RTAS' call makes a sequence of hypercalls to setup one true RTAS call. This means that "ibm,suspend_me" is handled specially in the ppc_rtas() syscall. The ppc_rtas() syscall has its arguments in big endian and can therefore pass these arguments directly to the RTAS call. "ibm,suspend_me" is handled specially from within ppc_rtas() (by calling rtas_ibm_suspend_me()) which has left an endian bug on little endian systems due to the requirement of hypercalls. The return value from rtas_ibm_suspend_me() gets returned in cpu endian, and is left unconverted, also a bug on little endian systems. rtas_ibm_suspend_me() does not actually make use of the rtas_args that it is passed. This patch removes the convoluted use of the rtas_args struct to pass params to rtas_ibm_suspend_me() in favour of passing what it needs as actual arguments. This patch also ensures the two callers of rtas_ibm_suspend_me() pass function parameters in cpu endian and in the case of ppc_rtas(), converts the return value. migrate_store() (the other caller of rtas_ibm_suspend_me()) is from a sysfs file which deals with everything in cpu endian so this function only underwent cleanup. This patch has been tested with KVM both LE and BE and on PowerVM both LE and BE. Under QEMU/KVM the migration happens without touching these code pathes. For PowerVM there is no obvious regression on BE and the LE code path now provides the correct parameters to the hypervisor. Signed-off-by: Cyril Bur Signed-off-by: Michael Ellerman

arch/powerpc: replace obsolete strict_strto* calls

2014-08-08T22:57:28Z

Replace strict_strto calls with more appropriate kstrto calls Signed-off-by: Daniel Walter Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc/pseries: Switch pseries drivers to use machine_xxx_initcall()

2014-07-28T04:11:26Z

A lot of the code in platforms/pseries is using non-machine initcalls. That means if a kernel built with pseries support runs on another platform, for example powernv, the initcalls will still run. Most of these cases are OK, though sometimes only due to luck. Some were having more effect: * hcall_inst_init - Checking FW_FEATURE_LPAR which is set on ps3 & celleb. * mobility_sysfs_init - created sysfs files unconditionally - but no effect due to ENOSYS from rtas_ibm_suspend_me() * apo_pm_init - created sysfs, allows write - nothing checks the value written to though * alloc_dispatch_log_kmem_cache - creating kmem_cache on non-pseries machines Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt

powerpc/pseries: Device tree should only be updated once after suspend/migrate

2014-03-07T04:54:49Z

The current code makes rtas calls for update-nodes, activate-firmware and then update-nodes again. The FW provides the same data for both update-nodes calls. As a result a proc entry exists error is reported for the second update while adding device nodes. This patch makes a single rtas call for update-nodes after activating the FW. It also add rtas_busy delay for the activate-firmware rtas call. Signed-off-by: Haren Myneni Signed-off-by: Tyrel Datwyler Signed-off-by: Benjamin Herrenschmidt

powerpc/pseries: Add mising of_node_put in delete_dt_node

2013-08-27T04:45:15Z

The node to be detached is retrieved via its phandle by a call to of_find_node_by_phandle which increments the ref count. We need a matching call to of_node_put to decrement the ref count and ensure the node is actually freed. Signed-off-by: Tyrel Datwyler Acked-by: Nathan Fontenot Signed-off-by: Benjamin Herrenschmidt

powerpc/pseries: Make dlpar_configure_connector parent node aware

2013-08-27T04:45:14Z

Currently the device nodes created in the device subtree returned by a call to dlpar_configure_connector are all named in the root node. This is because the the node name in the work area returned by ibm,configure-connector rtas call only contains the node name and not the entire node path. Passing the parent node where the new subtree will be created to dlpar_configure_connector allows the correct node path to be prefixed in the full_name field. Signed-off-by: Tyrel Datwyler Acked-by: Nathan Fontenot Signed-off-by: Benjamin Herrenschmidt