kernel/arch/powerpc/mm/init-common.c, branch linux-6.2.y

powerpc/kuep: Remove 'nosmep' boot time parameter except for book3s/64

2021-12-09T11:41:18Z

Deactivating KUEP at boot time is unrelevant for PPC32 and BOOK3E/64. Remove it. It allows to refactor setup_kuep() via a __weak function that only PPC64s will overide for now. Signed-off-by: Christophe Leroy [mpe: Fix CONFIG_PPC_BOOKS_64 -> CONFIG_PPC_BOOK3S_64 typo] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/4c36df18b41c988c4512f45d96220486adbe4c99.1634627931.git.christophe.leroy@csgroup.eu

Revert "powerpc: Inline setup_kup()"

2021-12-09T11:41:16Z

This reverts commit 1791ebd131c46539b024c0f2ebf12b6c88a265b9. setup_kup() was inlined to manage conflict between PPC32 marking setup_{kuap/kuep}() __init and PPC64 not marking them __init. But in fact PPC32 has removed the __init mark for all but 8xx in order to properly handle SMP. In order to make setup_kup() grow a bit, revert the commit mentioned above but remove __init for 8xx as well so that we don't have to mark setup_kup() as __ref. Also switch the order so that KUAP is initialised before KUEP because on the 40x, KUEP will depend on the activation of KUAP. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/7691088fd0994ee3c8db6298dc8c00259e3f6a7f.1634627931.git.christophe.leroy@csgroup.eu

powerpc: Inline setup_kup()

2020-12-15T02:13:49Z

setup_kup() is used by both 64-bit and 32-bit code. However on 64-bit it must not be __init, because it's used for CPU hotplug, whereas on 32-bit it should be __init because it calls setup_kuap/kuep() which are __init. We worked around that problem in the past by marking it __ref, see commit 67d53f30e23e ("powerpc/mm: fix section mismatch for setup_kup()"). Marking it __ref basically just omits it from section mismatch checking, which can lead to bugs, and in fact it did, see commit 44b4c4450f8d ("powerpc/64s: Mark the kuap/kuep functions non __init") We can avoid all these problems by just making it static inline. Because all it does is call other functions, making it inline actually shrinks the 32-bit vmlinux by ~76 bytes. Make it __always_inline as pointed out by Christophe. Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201214123011.311024-1-mpe@ellerman.id.au

powerpc/book3s64/kup: Check max key supported before enabling kup

2020-12-03T14:01:27Z

Don't enable KUEP/KUAP if we support less than or equal to 3 keys. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201202043854.76406-1-aneesh.kumar@linux.ibm.com

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13Z

The replacement of with made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s

" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include " % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13Z

The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds

powerpc: introduce kernstart_virt_addr to store the kernel base

2019-11-13T08:27:32Z

Now the kernel base is a fixed value - KERNELBASE. To support KASLR, we need a variable to store the kernel base. Signed-off-by: Jason Yan Reviewed-by: Christophe Leroy Reviewed-by: Diana Craciun Tested-by: Diana Craciun Signed-off-by: Scott Wood Signed-off-by: Michael Ellerman

powerpc: move memstart_addr and kernstart_addr to init-common.c

2019-11-13T08:27:28Z

These two variables are both defined in init_32.c and init_64.c. Move them to init-common.c and make them __ro_after_init. Signed-off-by: Jason Yan Reviewed-by: Christophe Leroy Reviewed-by: Diana Craciun Tested-by: Diana Craciun Signed-off-by: Scott Wood Signed-off-by: Michael Ellerman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

powerpc/mm: fix section mismatch for setup_kup()

2019-05-06T10:21:56Z

commit b28c97505eb1 ("powerpc/64: Setup KUP on secondary CPUs") moved setup_kup() out of the __init section. As stated in that commit, "this is only for 64-bit". But this function is also used on PPC32, where the two functions called by setup_kup() are in the __init section, so setup_kup() has to either be kept in the __init section on PPC32 or marked __ref. This patch marks it __ref, it fixes the below build warnings. MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x169ec): Section mismatch in reference from the function setup_kup() to the function .init.text:setup_kuep() The function setup_kup() references the function __init setup_kuep(). This is often because setup_kup lacks a __init annotation or the annotation of setup_kuep is wrong. WARNING: vmlinux.o(.text+0x16a04): Section mismatch in reference from the function setup_kup() to the function .init.text:setup_kuap() The function setup_kup() references the function __init setup_kuap(). This is often because setup_kup lacks a __init annotation or the annotation of setup_kuap is wrong. Fixes: b28c97505eb1 ("powerpc/64: Setup KUP on secondary CPUs") Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman