kernel/arch/powerpc/include/asm/time.h, branch linux-5.2.y

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

powerpc/hmi: Fix kernel hang when TB is in error state.

2019-05-02T16:54:57Z

On TOD/TB errors timebase register stops/freezes until HMI error recovery gets TOD/TB back into running state. On successful recovery, TB starts running again and udelay() that relies on TB value continues to function properly. But in case when HMI fails to recover from TOD/TB errors, the TB register stay freezed. With TB not running the __delay() function keeps looping and never return. If __delay() is called while in panic path then system hangs and never reboots after panic. Signed-off-by: Mahesh Salgaonkar Signed-off-by: Michael Ellerman

powerpc: change CONFIG_6xx to CONFIG_PPC_BOOK3S_32

2018-11-26T11:33:37Z

Today we have: config PPC_BOOK3S_32 bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx" [depends on PPC32 within a choice] config PPC_BOOK3S def_bool y depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 config 6xx def_bool y depends on PPC32 && PPC_BOOK3S 6xx is therefore redundant with PPC_BOOK3S_32. In order to make the code clearer, lets use preferably PPC_BOOK3S_32. This will allow to remove CONFIG_6xx in a later patch. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc: remove unused to_tm() helper

2018-06-03T10:43:34Z

to_tm() is now completely unused, the only reference being in the _dump_time() helper that is also unused. This removes both, leaving the rest of the powerpc RTC code y2038 safe to as far as the hardware supports. Signed-off-by: Arnd Bergmann Signed-off-by: Michael Ellerman

powerpc: generic clockevents broadcast receiver call tick_receive_broadcast

2018-06-03T10:40:27Z

The broadcast tick recipient can call tick_receive_broadcast rather than re-running the full timer interrupt. It does not have to check for the next event time, because the sender already determined the timer has expired. It does not have to test irq_work_pending, because that's a direct decrementer interrupt and does not go through the clock events subsystem. And it does not have to read PURR because that was removed with the previous patch. This results in no code size change, but both the decrementer and broadcast path lengths are reduced. Cc: Srivatsa S. Bhat Cc: Preeti U Murthy Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman

powerpc/pseries: lparcfg calculate PURR on demand

2018-06-03T10:40:27Z

For SPLPAR, lparcfg provides a sum of PURR registers for all CPUs. Currently this is done by reading PURR in context switch and timer interrupt, and storing that into a per-CPU variable. These are summed to provide the value. This does not work with all timer schemes (e.g., NO_HZ_FULL), and it is sub-optimal for performance because it reads the PURR register on every context switch, although that's been difficult to distinguish from noise in the contxt_switch microbenchmark. This patch implements the sum by calling a function on each CPU, to read and add PURR values of each CPU. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman

Merge branch 'topic/ppc-kvm' into next

2018-03-23T21:43:18Z

This brings in two series from Paul, one of which touches KVM code and may need to be merged into the kvm-ppc tree to resolve conflicts.

powerpc: Use feature bit for RTC presence rather than timebase presence

2018-03-23T13:36:45Z

All PowerPC CPUs other than the original PPC601 have a timebase register rather than the "real-time clock" (RTC) register that the PPC601 (and the original POWER and POWER2 CPUs) had. Currently we have a CPU feature bit to indicate the presence of the timebase, but it makes more sense to use a bit to indicate the unusual situation rather than the common situation. This therefore defines a CPU_FTR_USE_RTC bit in place of the CPU_FTR_USE_TB bit, and arranges for it to be set on PPC601 systems. Signed-off-by: Paul Mackerras Signed-off-by: Michael Ellerman

powerpc: Add missing prototype for time_init()

2018-03-13T04:50:36Z

The function time_init did not have a prototype defined in the time.h header. Fix the following warning (treated as error in W=1): arch/powerpc/kernel/time.c:1068:13: error: no previous prototype for ‘time_init’ Signed-off-by: Mathieu Malaterre Signed-off-by: Michael Ellerman

powerpc: Add missing prototype for hdec_interrupt

2018-03-13T04:50:35Z

In commit dabe859ec636 ("powerpc: Give hypervisor decrementer interrupts their own handler") an empty body function was added, but no prototype was declared. Fix warning (treated as error in W=1): arch/powerpc/kernel/time.c:629:6: error: no previous prototype for ‘hdec_interrupt’ Signed-off-by: Mathieu Malaterre Signed-off-by: Michael Ellerman