kernel/arch/powerpc/include/asm/thread_info.h, branch linux-4.16.y

Construct init thread stack in the linker script rather than by union

2018-01-09T23:21:02Z

Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells Tested-by: Tony Luck Tested-by: Will Deacon (arm64) Tested-by: Palmer Dabbelt Acked-by: Thomas Gleixner

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2017-05-05T18:36:44Z

Pull powerpc updates from Michael Ellerman: "Highlights include: - Larger virtual address space on 64-bit server CPUs. By default we use a 128TB virtual address space, but a process can request access to the full 512TB by passing a hint to mmap(). - Support for the new Power9 "XIVE" interrupt controller. - TLB flushing optimisations for the radix MMU on Power9. - Support for CAPI cards on Power9, using the "Coherent Accelerator Interface Architecture 2.0". - The ability to configure the mmap randomisation limits at build and runtime. - Several small fixes and cleanups to the kprobes code, as well as support for KPROBES_ON_FTRACE. - Major improvements to handling of system reset interrupts, correctly treating them as NMIs, giving them a dedicated stack and using a new hypervisor call to trigger them, all of which should aid debugging and robustness. - Many fixes and other minor enhancements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt, Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy, Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy, Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin, Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C. Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar, Yang Shi" * tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits) powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it powerpc/powernv: Fix TCE kill on NVLink2 powerpc/mm/radix: Drop support for CPUs without lockless tlbie powerpc/book3s/mce: Move add_taint() later in virtual mode powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body powerpc/smp: Document irq enable/disable after migrating IRQs powerpc/mpc52xx: Don't select user-visible RTAS_PROC powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset() powerpc/eeh: Clean up and document event handling functions powerpc/eeh: Avoid use after free in eeh_handle_special_event() cxl: Mask slice error interrupts after first occurrence cxl: Route eeh events to all drivers in cxl_pci_error_detected() cxl: Force context lock during EEH flow powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST powerpc/xmon: Teach xmon oops about radix vectors powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids powerpc/pseries: Enable VFIO powerpc/powernv: Fix iommu table size calculation hook for small tables powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc powerpc: Add arch/powerpc/tools directory ...

powerpc: Move THREAD_SHIFT config to Kconfig

2017-03-20T08:02:49Z

Shift the logic for defining THREAD_SHIFT logic to Kconfig in order to allow override by users. Signed-off-by: Hamish Martin Reviewed-by: Chris Packham Signed-off-by: Michael Ellerman

livepatch/powerpc: add TIF_PATCH_PENDING thread flag

2017-03-08T08:20:19Z

Add the TIF_PATCH_PENDING thread flag to enable the new livepatch per-task consistency model for powerpc. The bit getting set indicates the thread has a pending patch which needs to be applied when the thread exits the kernel. The bit is included in the _TIF_USER_WORK_MASK macro so that do_notify_resume() and klp_update_patch_state() get called when the bit is set. Signed-off-by: Josh Poimboeuf Reviewed-by: Petr Mladek Reviewed-by: Miroslav Benes Reviewed-by: Kamalesh Babulal Reviewed-by: Balbir Singh Acked-by: Michael Ellerman (powerpc) Signed-off-by: Jiri Kosina

signal: consolidate {TS,TLF}_RESTORE_SIGMASK code

2016-08-02T23:35:23Z

In general, there's no need for the "restore sigmask" flag to live in ti->flags. alpha, ia64, microblaze, powerpc, sh, sparc (64-bit only), tile, and x86 use essentially identical alternative implementations, placing the flag in ti->status. Replace those optimized implementations with an equally good common implementation that stores it in a bitfield in struct task_struct and drop the custom implementations. Additional architectures can opt in by removing their TIF_RESTORE_SIGMASK defines. Link: http://lkml.kernel.org/r/8a14321d64a28e40adfddc90e18a96c086a6d6f9.1468522723.git.luto@kernel.org Signed-off-by: Andy Lutomirski Tested-by: Michael Ellerman [powerpc] Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Tony Luck Cc: Fenghua Yu Cc: Michal Simek Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Yoshinori Sato Cc: Rich Felker Cc: "David S. Miller" Cc: Chris Metcalf Cc: Peter Zijlstra Cc: Borislav Petkov Cc: Brian Gerst Cc: Dmitry Safonov Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc32: provide VIRT_CPU_ACCOUNTING

2016-07-09T06:43:50Z

This patch provides VIRT_CPU_ACCOUTING to PPC32 architecture. PPC32 doesn't have the PACA structure, so we use the task_info structure to store the accounting data. In order to reuse on PPC32 the PPC64 functions, all u64 data has been replaced by 'unsigned long' so that it is u32 on PPC32 and u64 on PPC64 Signed-off-by: Christophe Leroy Signed-off-by: Scott Wood

powerpc/livepatch: Add livepatch stack to struct thread_info

2016-04-14T05:47:06Z

In order to support live patching we need to maintain an alternate stack of TOC & LR values. We use the base of the stack for this, and store the "live patch stack pointer" in struct thread_info. Unlike the other fields of thread_info, we can not statically initialise that value, so it must be done at run time. This patch just adds the code to support that, it is not enabled until the next patch which actually adds live patch support. Signed-off-by: Michael Ellerman Acked-by: Balbir Singh

arch: Remove exec_domain from remaining archs

2015-04-12T19:03:30Z

Signed-off-by: Richard Weinberger

all arches, signal: move restart_block to struct task_struct

2015-02-13T02:54:12Z

If an attacker can cause a controlled kernel stack overflow, overwriting the restart block is a very juicy exploit target. This is because the restart_block is held in the same memory allocation as the kernel stack. Moving the restart block to struct task_struct prevents this exploit by making the restart_block harder to locate. Note that there are other fields in thread_info that are also easy targets, at least on some architectures. It's also a decent simplification, since the restart code is more or less identical on all architectures. [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack] Signed-off-by: Andy Lutomirski Cc: Thomas Gleixner Cc: Al Viro Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Kees Cook Cc: David Miller Acked-by: Richard Weinberger Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Vineet Gupta Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Steven Miao Cc: Mark Salter Cc: Aurelien Jacquiot Cc: Mikael Starvik Cc: Jesper Nilsson Cc: David Howells Cc: Richard Kuo Cc: "Luck, Tony" Cc: Geert Uytterhoeven Cc: Michal Simek Cc: Ralf Baechle Cc: Jonas Bonn Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Acked-by: Michael Ellerman (powerpc) Tested-by: Michael Ellerman (powerpc) Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Chen Liqin Cc: Lennox Wu Cc: Chris Metcalf Cc: Guan Xuetao Cc: Chris Zankel Cc: Max Filippov Cc: Oleg Nesterov Cc: Guenter Roeck Signed-off-by: James Hogan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds