kernel/arch/powerpc/include/asm/pgtable.h, branch linux-5.1.y

mm/nvdimm: add is_ioremap_addr and use that to check ioremap address

2019-07-26T07:13:05Z

commit 9bd3bb6703d8c0a5fb8aec8e3287bd55b7341dcd upstream. Architectures like powerpc use different address range to map ioremap and vmalloc range. The memunmap() check used by the nvdimm layer was wrongly using is_vmalloc_addr() to check for ioremap range which fails for ppc64. This result in ppc64 not freeing the ioremap mapping. The side effect of this is an unbind failure during module unload with papr_scm nvdimm driver Link: http://lkml.kernel.org/r/20190701134038.14165-1-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Cc: Dan Williams Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

powerpc/dma: use the dma-direct allocator for coherent platforms

2019-02-18T11:41:04Z

The generic code allows a few nice things such as node local allocations and dipping into the CMA area. The lookup of the right zone for a given dma mask works a little different, but the results should be the same. Signed-off-by: Christoph Hellwig Tested-by: Christian Zigotzky Signed-off-by: Michael Ellerman

powerpc: use mm zones more sensibly

2018-12-20T11:21:20Z

Powerpc has somewhat odd usage where ZONE_DMA is used for all memory on common 64-bit configfs, and ZONE_DMA32 is used for 31-bit schemes. Move to a scheme closer to what other architectures use (and I dare to say the intent of the system): - ZONE_DMA: optionally for memory < 31-bit (64-bit embedded only) - ZONE_NORMAL: everything addressable by the kernel - ZONE_HIGHMEM: memory > 32-bit for 32-bit kernels Also provide information on how ZONE_DMA is used by defining ARCH_ZONE_DMA_BITS. Contains various fixes from Benjamin Herrenschmidt. Signed-off-by: Christoph Hellwig Signed-off-by: Michael Ellerman

powerpc/mm: fix a warning when a cache is common to PGD and hugepages

2018-12-04T08:45:01Z

While implementing TLB miss HW assistance on the 8xx, the following warning was encountered: [ 423.732965] WARNING: CPU: 0 PID: 345 at mm/slub.c:2412 ___slab_alloc.constprop.30+0x26c/0x46c [ 423.733033] CPU: 0 PID: 345 Comm: mmap Not tainted 4.18.0-rc8-00664-g2dfff9121c55 #671 [ 423.733075] NIP: c0108f90 LR: c0109ad0 CTR: 00000004 [ 423.733121] REGS: c455bba0 TRAP: 0700 Not tainted (4.18.0-rc8-00664-g2dfff9121c55) [ 423.733147] MSR: 00021032 CR: 24224848 XER: 20000000 [ 423.733319] [ 423.733319] GPR00: c0109ad0 c455bc50 c4521910 c60053c0 007080c0 c0011b34 c7fa41e0 c455be30 [ 423.733319] GPR08: 00000001 c00103a0 c7fa41e0 c49afcc4 24282842 10018840 c079b37c 00000040 [ 423.733319] GPR16: 73f00000 00210d00 00000000 00000001 c455a000 00000100 00000200 c455a000 [ 423.733319] GPR24: c60053c0 c0011b34 007080c0 c455a000 c455a000 c7fa41e0 00000000 00009032 [ 423.734190] NIP [c0108f90] ___slab_alloc.constprop.30+0x26c/0x46c [ 423.734257] LR [c0109ad0] kmem_cache_alloc+0x210/0x23c [ 423.734283] Call Trace: [ 423.734326] [c455bc50] [00000100] 0x100 (unreliable) [ 423.734430] [c455bcc0] [c0109ad0] kmem_cache_alloc+0x210/0x23c [ 423.734543] [c455bcf0] [c0011b34] huge_pte_alloc+0xc0/0x1dc [ 423.734633] [c455bd20] [c01044dc] hugetlb_fault+0x408/0x48c [ 423.734720] [c455bdb0] [c0104b20] follow_hugetlb_page+0x14c/0x44c [ 423.734826] [c455be10] [c00e8e54] __get_user_pages+0x1c4/0x3dc [ 423.734919] [c455be80] [c00e9924] __mm_populate+0xac/0x140 [ 423.735020] [c455bec0] [c00db14c] vm_mmap_pgoff+0xb4/0xb8 [ 423.735127] [c455bf00] [c00f27c0] ksys_mmap_pgoff+0xcc/0x1fc [ 423.735222] [c455bf40] [c000e0f8] ret_from_syscall+0x0/0x38 [ 423.735271] Instruction dump: [ 423.735321] 7cbf482e 38fd0008 7fa6eb78 7fc4f378 4bfff5dd 7fe3fb78 4bfffe24 81370010 [ 423.735536] 71280004 41a2ff88 4840c571 4bffff80 <0fe00000> 4bfffeb8 81340010 712a0004 [ 423.735757] ---[ end trace e9b222919a470790 ]--- This warning occurs when calling kmem_cache_zalloc() on a cache having a constructor. In this case it happens because PGD cache and 512k hugepte cache are the same size (4k). While a cache with constructor is created for the PGD, hugepages create cache without constructor and uses kmem_cache_zalloc(). As both expect a cache with the same size, the hugepages reuse the cache created for PGD, hence the conflict. In order to avoid this conflict, this patch: - modifies pgtable_cache_add() so that a zeroising constructor is added for any cache size. - replaces calls to kmem_cache_zalloc() by kmem_cache_alloc() Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc/mm: Extend pte_fragment functionality to PPC32

2018-12-04T08:45:01Z

In order to allow the 8xx to handle pte_fragments, this patch extends the use of pte_fragments to PPC32 platforms. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc/mm: add helpers to get/set mm.context->pte_frag

2018-12-04T08:45:01Z

In order to handle pte_fragment functions with single fragment without adding pte_frag in all mm_context_t, this patch creates two helpers which do nothing on platforms using a single fragment. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc/mm: Make pte_pgprot return all pte bits

2018-10-18T13:56:17Z

Other archs do the same and instead of adding required pte bits (which got masked out) in __ioremap_at(), make sure we filter only pfn bits out. Fixes: 26973fa5ac0e ("powerpc/mm: use pte helpers in generic code") Reviewed-by: Christophe Leroy Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman

powerpc/mm: move P and S tables in the common pgtable.h

2018-10-14T07:04:09Z

__P and __S flags are the same for all platform and should remain as is in the future, so avoid duplication. Reviewed-by: Aneesh Kumar K.V Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc/mm/radix: Change pte relax sequence to handle nest MMU hang

2018-06-03T10:40:34Z

When relaxing access (read -> read_write update), pte needs to be marked invalid to handle a nest MMU bug. We also need to do a tlb flush after the pte is marked invalid before updating the pte with new access bits. We also move tlb flush to platform specific __ptep_set_access_flags. This will help us to gerid of unnecessary tlb flush on BOOK3S 64 later. We don't do that in this patch. This also helps in avoiding multiple tlbies with coprocessor attached. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

kernel/arch/powerpc/include/asm/pgtable.h, branch linux-5.1.y

mm/nvdimm: add is_ioremap_addr and use that to check ioremap address

powerpc/dma: use the dma-direct allocator for coherent platforms

powerpc: use mm zones more sensibly

powerpc/mm: fix a warning when a cache is common to PGD and hugepages

powerpc/mm: Extend pte_fragment functionality to PPC32

powerpc/mm: add helpers to get/set mm.context->pte_frag

powerpc/mm: Make pte_pgprot return all pte bits

powerpc/mm: move __P and __S tables in the common pgtable.h

powerpc/mm/radix: Change pte relax sequence to handle nest MMU hang

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

powerpc/mm: move P and S tables in the common pgtable.h