kernel/arch/powerpc/include/asm/pgtable-ppc64.h, branch linux-4.1.y

powerpc/mm: Fix pte_pagesize_index() crash on 4K w/64K hash

2015-09-29T17:26:04Z

commit 74b5037baa2011a2799e2c43adde7d171b072f9e upstream. The powerpc kernel can be built to have either a 4K PAGE_SIZE or a 64K PAGE_SIZE. However when built with a 4K PAGE_SIZE there is an additional config option which can be enabled, PPC_HAS_HASH_64K, which means the kernel also knows how to hash a 64K page even though the base PAGE_SIZE is 4K. This is used in one obscure configuration, to support 64K pages for SPU local store on the Cell processor when the rest of the kernel is using 4K pages. In this configuration, pte_pagesize_index() is defined to just pass through its arguments to get_slice_psize(). However pte_pagesize_index() is called for both user and kernel addresses, whereas get_slice_psize() only knows how to handle user addresses. This has been broken forever, however until recently it happened to work. That was because in get_slice_psize() the large kernel address would cause the right shift of the slice mask to return zero. However in commit 7aa0727f3302 ("powerpc/mm: Increase the slice range to 64TB"), the get_slice_psize() code was changed so that instead of a right shift we do an array lookup based on the address. When passed a kernel address this means we index way off the end of the slice array and return random junk. That is only fatal if we happen to hit something non-zero, but when we do return a non-zero value we confuse the MMU code and eventually cause a check stop. This fix is ugly, but simple. When we're called for a kernel address we return 4K, which is always correct in this configuration, otherwise we use the slice mask. Fixes: 7aa0727f3302 ("powerpc/mm: Increase the slice range to 64TB") Reported-by: Cyril Bur Signed-off-by: Michael Ellerman Reviewed-by: Aneesh Kumar K.V Signed-off-by: Greg Kroah-Hartman

powerpc: drop _PAGE_FILE and pte_file()-related helpers

2015-02-17T01:56:05Z

We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. Signed-off-by: Kirill A. Shutemov Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: make FIRST_USER_ADDRESS unsigned long on all archs

2015-02-12T01:06:03Z

LKP has triggered a compiler warning after my recent patch "mm: account pmd page tables to the process": mm/mmap.c: In function 'exit_mmap': >> mm/mmap.c:2857:2: warning: right shift count >= width of type [enabled by default] The code: > 2857 WARN_ON(mm_nr_pmds(mm) > 2858 round_up(FIRST_USER_ADDRESS, PUD_SIZE) >> PUD_SHIFT); In this, on tile, we have FIRST_USER_ADDRESS defined as 0. round_up() has the same type -- int. PUD_SHIFT. I think the best way to fix it is to define FIRST_USER_ADDRESS as unsigned long. On every arch for consistency. Signed-off-by: Kirill A. Shutemov Reported-by: Wu Fengguang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

2014-12-12T01:48:14Z

Pull powerpc updates from Michael Ellerman: "Some nice cleanups like removing bootmem, and removal of __get_cpu_var(). There is one patch to mm/gup.c. This is the generic GUP implementation, but is only used by us and arm(64). We have an ack from Steve Capper, and although we didn't get an ack from Andrew he told us to take the patch through the powerpc tree. There's one cxl patch. This is in drivers/misc, but Greg said he was happy for us to manage fixes for it. There is an infrastructure patch to support an IPMI driver for OPAL. There is also an RTC driver for OPAL. We weren't able to get any response from the RTC maintainer, Alessandro Zummo, so in the end we just merged the driver. The usual batch of Freescale updates from Scott" * tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits) powerpc/powernv: Return to cpu offline loop when finished in KVM guest powerpc/book3s: Fix partial invalidation of TLBs in MCE code. powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault powerpc/xmon: Cleanup the breakpoint flags powerpc/xmon: Enable HW instruction breakpoint on POWER8 powerpc/mm/thp: Use tlbiel if possible powerpc/mm/thp: Remove code duplication powerpc/mm/hugetlb: Sanity check gigantic hugepage count powerpc/oprofile: Disable pagefaults during user stack read powerpc/mm: Check for matching hpte without taking hpte lock powerpc: Drop useless warning in eeh_init() powerpc/powernv: Cleanup unused MCE definitions/declarations. powerpc/eeh: Dump PHB diag-data early powerpc/eeh: Recover EEH error on ownership change for BCM5719 powerpc/eeh: Set EEH_PE_RESET on PE reset powerpc/eeh: Refactor eeh_reset_pe() powerpc: Remove more traces of bootmem powerpc/pseries: Initialise nvram_pstore_info's buf_lock cxl: Name interrupts in /proc/interrupt cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning ...

mm: fix huge zero page accounting in smaps report

2014-12-11T01:41:08Z

As a small zero page, huge zero page should not be accounted in smaps report as normal page. For small pages we rely on vm_normal_page() to filter out zero page, but vm_normal_page() is not designed to handle pmds. We only get here due hackish cast pmd to pte in smaps_pte_range() -- pte and pmd format is not necessary compatible on each and every architecture. Let's add separate codepath to handle pmds. follow_trans_huge_pmd() will detect huge zero page for us. We would need pmd_dirty() helper to do this properly. The patch adds it to THP-enabled architectures which don't yet have one. [akpm@linux-foundation.org: use do_div to fix 32-bit build] Signed-off-by: "Kirill A. Shutemov" Reported-by: Fengguang Wu Tested-by: Fengwei Yin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc/mm: Switch to generic RCU get_user_pages_fast

2014-11-14T06:24:21Z

This patch switch the ppc arch to use the generic RCU based gup implementation. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman

powerpc/mm: Add missing pmd accessors

2014-11-14T06:24:21Z

This patch add documentation and missing accessors. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman

powerpc: Add printk levels to powerpc code

2014-10-02T07:33:55Z

Add printk levels to some places in the powerpc port. Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman

powerpc/thp: Handle combo pages in invalidate

2014-08-13T08:20:39Z

If we changed base page size of the segment, either via sub_page_protect or via remap_4k_pfn, we do a demote_segment which doesn't flush the hash table entries. We do a lazy hash page table flush for all mapped pages in the demoted segment. This happens when we handle hash page fault for these pages. We use _PAGE_COMBO bit along with _PAGE_HASHPTE to indicate whether a pte is backed by 4K hash pte. If we find _PAGE_COMBO not set on the pte, that implies that we could possibly have older 64K hash pte entries in the hash page table and we need to invalidate those entries. Use _PAGE_COMBO to determine the page size with which we should invalidate the hash table entries on unmap. CC: Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt

powerpc/mm: Add new "set" flag argument to pte/pmd update function

2014-02-17T00:19:35Z

pte_update() is a powerpc-ism used to change the bits of a PTE when the access permission is being restricted (a flush is potentially needed). It uses atomic operations on when needed and handles the hash synchronization on hash based processors. It is currently only used to clear PTE bits and so the current implementation doesn't provide a way to also set PTE bits. The new _PAGE_NUMA bit, when set, is actually restricting access so it must use that function too, so this change adds the ability for pte_update() to also set bits. We will use this later to set the _PAGE_NUMA bit. Acked-by: Mel Gorman Acked-by: Rik van Riel Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt