kernel/arch/powerpc/include/asm/perf_event_server.h, branch linux-6.2.y

powerpc/perf: Add __init attribute to eligible functions

2021-12-23T11:33:11Z

Some functions defined in 'arch/powerpc/perf' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211216220035.605465-5-nick.child@ibm.com

powerpc/perf: Expose processor pipeline stage cycles using PERF_SAMPLE_WEIGHT_STRUCT

2021-04-20T04:22:23Z

Performance Monitoring Unit (PMU) registers in powerpc provides information on cycles elapsed between different stages in the pipeline. This can be used for application tuning. On ISA v3.1 platform, this information is exposed by sampling registers. Patch adds kernel support to capture two of the cycle counters as part of perf sample using the sample type: PERF_SAMPLE_WEIGHT_STRUCT. The power PMU function 'get_mem_weight' currently uses 64 bit weight field of perf_sample_data to capture memory latency. But following the introduction of PERF_SAMPLE_WEIGHT_TYPE, weight field could contain 64-bit or 32-bit value depending on the architexture support for PERF_SAMPLE_WEIGHT_STRUCT. Patches uses WEIGHT_STRUCT to expose the pipeline stage cycles info. Hence update the ppmu functions to work for 64-bit and 32-bit weight values. If the sample type is PERF_SAMPLE_WEIGHT, use the 64-bit weight field. if the sample type is PERF_SAMPLE_WEIGHT_STRUCT, memory subsystem latency is stored in the low 32bits of perf_sample_weight structure. Also for CPU_FTR_ARCH_31, capture the two cycle counter information in two 16 bit fields of perf_sample_weight structure. Signed-off-by: Athira Rajeev Reviewed-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1616425047-1666-2-git-send-email-atrajeev@linux.vnet.ibm.com

powerpc/perf: Infrastructure to support checking of attr.config*

2021-04-14T13:04:19Z

Introduce code to support the checking of attr.config* for values which are reserved for a given platform. Performance Monitoring Unit (PMU) configuration registers have fields that are reserved and some specific values for bit fields are reserved. For ex., MMCRA[61:62] is Random Sampling Mode (SM) and value of 0b11 for this field is reserved. Writing non-zero or invalid values in these fields will have unknown behaviours. Patch adds a generic call-back function "check_attr_config" in "struct power_pmu", to be called in event_init to check for attr.config* values for a given platform. Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210408074504.248211-1-maddy@linux.ibm.com

powerpc/perf: Adds support for programming of Thresholding in P10

2021-02-11T12:35:36Z

Thresholding, a performance monitoring unit feature, can be used to identify marked instructions which take more than expected cycles between start event and end event. Threshold compare (thresh_cmp) bits are programmed in MMCRA register. In Power9, thresh_cmp bits were part of the event code. But in case of P10, thresh_cmp are not part of event code due to inclusion of MMCR3 bits. Patch here adds an option to use attr.config1 variable to be used to pass thresh_cmp value to be programmed in MMCRA register. A new ppmu flag called PPMU_HAS_ATTR_CONFIG1 has been added and this flag is used to notify the use of attr.config1 variable. Patch has extended the parameter list of 'compute_mmcr', to include power_pmu's 'flags' element and parameter list of get_constraint to include attr.config1 value. It also extend parameter list of power_check_constraints inorder to pass perf_event list. As stated by commit ef0e3b650f8d ("powerpc/perf: Fix Threshold Event Counter Multiplier width for P10"), constraint bits for thresh_cmp is also needed to be increased to 11 bits, which is handled as part of this patch. We added bit number 53 as part of constraint bits of thresh_cmp for power10 to make it an 11 bit field. Updated layout for p10: /* * Layout of constraint bits: * * 60 56 52 48 44 40 36 32 * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | * [ fab_match ] [ thresh_cmp ] [ thresh_ctl ] [ ] * | | * [ thresh_cmp bits for p10] thresh_sel -* * * 28 24 20 16 12 8 4 0 * | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | - - - - | * [ ] | [ ] | [ sample ] [ ] [6] [5] [4] [3] [2] [1] * | | | | | * BHRB IFM -* | | |*radix_scope | Count of events for each PMC. * EBB -* | | p1, p2, p3, p4, p5, p6. * L1 I/D qualifier -* | * nc - number of counters -* * * The PMC fields P1..P6, and NC, are adder fields. As we accumulate constraints * we want the low bit of each field to be added to any existing value. * * Everything else is a value field. */ Result: command#: cat /sys/devices/cpu/format/thresh_cmp config1:0-17 ex. usage: command#: perf record -I --weight -d -e cpu/event=0x67340101EC,thresh_cmp=500/ ./ebizzy -S 2 -t 1 -s 4096 1826636 records/s real 2.00 s user 2.00 s sys 0.00 s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.038 MB perf.data (61 samples) ] Signed-off-by: Kajol Jain Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210209095234.837356-1-kjain@linux.ibm.com

powerpc/perf: Add new power PMU flag "PPMU_P10_DD1" for power10 DD1

2020-11-19T05:56:55Z

Add a new power PMU flag "PPMU_P10_DD1" which can be used to conditionally add any code path for power10 DD1 processor version. Also modify power10 PMU driver code to set this flag only for DD1, based on the Processor Version Register (PVR) value. Signed-off-by: Athira Rajeev Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201021085329.384535-1-maddy@linux.ibm.com

powerpc/perf: Add support for outputting extended regs in perf intr_regs

2020-08-17T03:11:22Z

Add support for perf extended register capability in powerpc. The capability flag PERF_PMU_CAP_EXTENDED_REGS, is used to indicate the PMU which support extended registers. The generic code define the mask of extended registers as 0 for non supported architectures. Patch adds extended regs support for power9 platform by exposing MMCR0, MMCR1 and MMCR2 registers. REG_RESERVED mask needs update to include extended regs. PERF_REG_EXTENDED_MASK, contains mask value of the supported registers, is defined at runtime in the kernel based on platform since the supported registers may differ from one processor version to another and hence the MASK value. With the patch: available registers: r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15 r16 r17 r18 r19 r20 r21 r22 r23 r24 r25 r26 r27 r28 r29 r30 r31 nip msr orig_r3 ctr link xer ccr softe trap dar dsisr sier mmcra mmcr0 mmcr1 mmcr2 PERF_RECORD_SAMPLE(IP, 0x1): 4784/4784: 0 period: 1 addr: 0 ... intr regs: mask 0xffffffffffff ABI 64-bit .... r0 0xc00000000012b77c .... r1 0xc000003fe5e03930 .... r2 0xc000000001b0e000 .... r3 0xc000003fdcddf800 .... r4 0xc000003fc7880000 .... r5 0x9c422724be .... r6 0xc000003fe5e03908 .... r7 0xffffff63bddc8706 .... r8 0x9e4 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0xc0000000001299c0 .... r13 0xc000003ffffc4800 .... r14 0x0 .... r15 0x7fffdd8b8b00 .... r16 0x0 .... r17 0x7fffdd8be6b8 .... r18 0x7e7076607730 .... r19 0x2f .... r20 0xc00000001fc26c68 .... r21 0xc0002041e4227e00 .... r22 0xc00000002018fb60 .... r23 0x1 .... r24 0xc000003ffec4d900 .... r25 0x80000000 .... r26 0x0 .... r27 0x1 .... r28 0x1 .... r29 0xc000000001be1260 .... r30 0x6008010 .... r31 0xc000003ffebb7218 .... nip 0xc00000000012b910 .... msr 0x9000000000009033 .... orig_r3 0xc00000000012b86c .... ctr 0xc0000000001299c0 .... link 0xc00000000012b77c .... xer 0x0 .... ccr 0x28002222 .... softe 0x1 .... trap 0xf00 .... dar 0x0 .... dsisr 0x80000000000 .... sier 0x0 .... mmcra 0x80000000000 .... mmcr0 0x82008090 .... mmcr1 0x1e000000 .... mmcr2 0x0 ... thread: perf:4784 Signed-off-by: Anju T Sudhakar Signed-off-by: Athira Rajeev Tested-by: Nageswara R Sastry Reviewed-by: Madhavan Srinivasan Reviewed-by: Kajol Jain Reviewed-and-tested-by: Ravi Bangoria Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1596794701-23530-2-git-send-email-atrajeev@linux.vnet.ibm.com

powerpc/perf: Add support for ISA3.1 PMU SPRs

2020-07-22T11:56:41Z

PowerISA v3.1 includes new performance monitoring unit(PMU) special purpose registers (SPRs). They are Monitor Mode Control Register 3 (MMCR3) Sampled Instruction Event Register 2 (SIER2) Sampled Instruction Event Register 3 (SIER3) MMCR3 is added for further sampling related configuration control. SIER2/SIER3 are added to provide additional information about the sampled instruction. Patch adds new PPMU flag called "PPMU_ARCH_31" to support handling of these new SPRs, updates the struct thread_struct to include these new SPRs, include MMCR3 in struct mmcr_regs. This is needed to support programming of MMCR3 SPR during event_enable/disable. Patch also adds the sysfs support for the MMCR3 SPR along with SPRN_ macros for these new pmu SPRs. Signed-off-by: Madhavan Srinivasan [mpe: Rename to PPMU_ARCH_31 as noted by jpn] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1594996707-3727-5-git-send-email-atrajeev@linux.vnet.ibm.com

powerpc/perf: Update Power PMU cache_events to u64 type

2020-07-22T11:56:40Z

Events of type PERF_TYPE_HW_CACHE was described for Power PMU as: int (*cache_events)[type][op][result]; where type, op, result values unpacked from the event attribute config value is used to generate the raw event code at runtime. So far the event code values which used to create these cache-related events were within 32 bit and `int` type worked. In power10, some of the event codes are of 64-bit value and hence update the Power PMU cache_events to `u64` type in `power_pmu` struct. Also propagate this change to existing all PMU driver code paths which are using ppmu->cache_events. Signed-off-by: Athira Rajeev Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1594996707-3727-4-git-send-email-atrajeev@linux.vnet.ibm.com

powerpc/perf: Update cpu_hw_event to use `struct` for storing MMCR registers

2020-07-21T14:03:17Z

core-book3s currently uses array to store the MMCR registers as part of per-cpu `cpu_hw_events`. This patch does a clean up to use `struct` to store mmcr regs instead of array. This will make code easier to read and reduces chance of any subtle bug that may come in the future, say when new registers are added. Patch updates all relevant code that was using MMCR array ( cpuhw->mmcr[x]) to use newly introduced `struct`. This includes the PMU driver code for supported platforms (power5 to power9) and ISA macros for counter support functions. Signed-off-by: Athira Rajeev Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1594996707-3727-2-git-send-email-atrajeev@linux.vnet.ibm.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman