kernel/arch/powerpc/include/asm/opal-api.h, branch linux-5.2.y

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

powerpc/include: Add data structures and macros for IMC trace mode

2019-05-02T16:54:59Z

Add the macros needed for IMC (In-Memory Collection Counters) trace-mode and data structure to hold the trace-imc record data. Also, add the new type "OPAL_IMC_COUNTERS_TRACE" in 'opal-api.h', since there is a new switch case added in the opal-calls for IMC. Signed-off-by: Anju T Sudhakar Reviewed-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman

powerpc/hmi: Fix kernel hang when TB is in error state.

2019-05-02T16:54:57Z

On TOD/TB errors timebase register stops/freezes until HMI error recovery gets TOD/TB back into running state. On successful recovery, TB starts running again and udelay() that relies on TB value continues to function properly. But in case when HMI fails to recover from TOD/TB errors, the TB register stay freezed. With TB not running the __delay() function keeps looping and never return. If __delay() is called while in panic path then system hangs and never reboots after panic. Signed-off-by: Mahesh Salgaonkar Signed-off-by: Michael Ellerman

powerpc/xive: add OPAL extensions for the XIVE native exploitation support

2019-04-11T05:31:41Z

The support for XIVE native exploitation mode in Linux/KVM needs a couple more OPAL calls to get and set the state of the XIVE internal structures being used by a sPAPR guest. Signed-off-by: Cédric Le Goater Reviewed-by: David Gibson Signed-off-by: Michael Ellerman

powerpc/powernv: Make possible for user to force a full ipl cec reboot

2018-10-03T05:39:45Z

Ever since fast reboot is enabled by default in opal, opal_cec_reboot() will use fast-reset instead of full IPL to perform system reboot. This leaves the user with no direct way to force a full IPL reboot except changing an nvram setting that persistently disables fast-reset for all subsequent reboots. This patch provides a more direct way for the user to force a one-shot full IPL reboot by passing the command line argument 'full' to the reboot command. So the user will be able to tweak the reboot behavior via: $ sudo reboot full # Force a full ipl reboot skipping fast-reset or $ sudo reboot # default reboot path (usually fast-reset) The reboot command passes the un-parsed command argument to the kernel via the 'Reboot' syscall which is then passed on to the arch function pnv_restart(). The patch updates pnv_restart() to handle this cmd-arg and issues opal_cec_reboot2 with OPAL_REBOOT_FULL_IPL to force a full IPL reset. Signed-off-by: Vaibhav Jain Acked-by: Andrew Donnellan Signed-off-by: Michael Ellerman

crypto/nx: Initialize 842 high and normal RxFIFO control registers

2018-08-07T14:32:34Z

NX increments readOffset by FIFO size in receive FIFO control register when CRB is read. But the index in RxFIFO has to match with the corresponding entry in FIFO maintained by VAS in kernel. Otherwise NX may be processing incorrect CRBs and can cause CRB timeout. VAS FIFO offset is 0 when the receive window is opened during initialization. When the module is reloaded or in kexec boot, readOffset in FIFO control register may not match with VAS entry. This patch adds nx_coproc_init OPAL call to reset readOffset and queued entries in FIFO control register for both high and normal FIFOs. Signed-off-by: Haren Myneni [mpe: Fixup uninitialized variable warning] Signed-off-by: Michael Ellerman

powerpc/powernv: Add support to enable sensor groups

2018-07-31T09:56:45Z

Adds support to enable/disable a sensor group at runtime. This can be used to select the sensor groups that needs to be copied to main memory by OCC. Sensor groups like power, temperature, current, voltage, frequency, utilization can be enabled/disabled at runtime. Signed-off-by: Shilpasri G Bhat Signed-off-by: Michael Ellerman

powerpc/powernv: call OPAL_QUIESCE before OPAL_SIGNAL_SYSTEM_RESET

2018-06-03T10:40:30Z

Although it is often possible to recover a CPU that was interrupted from OPAL with a system reset NMI, it's undesirable to interrupt them for a few reasons. Firstly because dump/debug code itself needs to call firmware, so it could hang on a lock or possibly corrupt a per-cpu data structure if it or another CPU was interrupted from OPAL. Secondly, the kexec crash dump code will not return from interrupt to unwind the OPAL call. Call OPAL_QUIESCE with QUIESCE_HOLD before sending an NMI IPI to another CPU, which wait for it to leave firmware (or time out) to avoid this problem in normal conditions. Firmware bugs may still result in a timeout and interrupting OPAL, but that is the best option (stops the CPU, and possibly allows firmware to be debugged). Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman

powernv: opal-sensor: Add support to read 64bit sensor values

2018-05-21T04:48:02Z

This patch adds support to read 64-bit sensor values. This method is used to read energy sensors and counters which are of type u64. Signed-off-by: Shilpasri G Bhat Signed-off-by: Michael Ellerman

powerpc/powernv: Enable tunneled operations

2018-03-13T04:50:30Z

P9 supports PCI tunneled operations (atomics and as_notify). This patch adds support for tunneled operations on powernv, with a new API, to be called by device drivers: pnv_pci_enable_tunnel() Enable tunnel operations, tell driver the 16-bit ASN indication used by kernel. pnv_pci_disable_tunnel() Disable tunnel operations. pnv_pci_set_tunnel_bar() Tell kernel the Tunnel BAR Response address used by driver. This function uses two new OPAL calls, as the PBCQ Tunnel BAR register is configured by skiboot. pnv_pci_get_as_notify_info() Return the ASN info of the thread to be woken up. Signed-off-by: Philippe Bergheaud Reviewed-by: Frederic Barrat Reviewed-by: Christophe Lombard Signed-off-by: Michael Ellerman